4.7 Article

Effect of nanoparticle shape on cooling performance of boehmite-alumina nanofluid in a helical heat sink for laminar and turbulent flow regimes

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Thermodynamics

Experimental study on the thermal performance of PCMs based heat sink using higher alcohol/graphite foam

Shisong Wang et al.

Summary: This study investigated the thermal performance of heat sinks using higher alcohol and higher alcohol/graphite foam as phase change materials (PCMs) by comparing their heating characteristics and equivalent thermal physical properties. The results showed that the PCM-based heat sink with graphite foam has an advantage in temperature control over the one with higher alcohol alone. The analysis of dimensionless experimental data provides a simplified reference method for engineering design and application of PCMs.

APPLIED THERMAL ENGINEERING (2021)

Article Thermodynamics

An experimental investigation of a PCM-based heat sink enhanced with a topology-optimized tree-like structure

J. Y. Ho et al.

Summary: A new PCM-based heat sink design was developed using a topology optimization strategy, resulting in enhanced thermal performance and extended operational time. Experimental results showed that the tree-like structure heat sink achieved up to 4 degrees C lower wall temperatures compared to the conventional fin-structure heat sink, with best performance using RT35HC at low heat fluxes and RT44HC at high heat fluxes.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Thermodynamics

Dissipating the heat generated in high-performance electronics using graphitic foam heat-sinks cooled with a dielectric liquid

Ahmed Alhusseny et al.

Summary: Graphitic foams with unique heat transfer properties are used to form effective heat sinks for dissipating extreme heat in high-performance electronics. Dielectric liquid is utilized as a coolant to sweep away high heat density. The feasibility of the suggested thermal management technique is numerically inspected and confirmed through simulation and algorithm verification.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Article Thermodynamics

Study of the performance of an integrated liquid cooling heat sink for high-power IGBTs

Minqiang Pan et al.

Summary: Research shows that the VC integrated heat sink has lower thermal resistance compared to the VC separated heat sink, and the relatively simple microchannel heat sink can significantly enhance temperature uniformity. Moreover, cooling water flow rate, temperature, and inclination angle all have an impact on the performance of the VC integrated heat sink, with the optimal performance observed at an inclination angle of 60 degrees.

APPLIED THERMAL ENGINEERING (2021)

Article Thermodynamics

Three-dimensional analysis of forced convection of Newtonian and non-Newtonian nanofluids through a horizontal pipe using single- and two-phase models

Naser Hazeri-Mahmel et al.

Summary: This study involves a 3D analysis of forced convection of Newtonian and non-Newtonian nanofluids through a horizontal pipe using single- and two-phase mathematical models. The results show that the non-Newtonian mixture model provides more accurate results for a volume fraction of 0.01, and the heat transfer coefficient increases with increasing solid volume fraction in the mixture models.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Article Thermodynamics

Introducing a novel heat sink comprising PCM and air - Adapted to electronic device thermal management

Rasool Kalbasi

Summary: The study introduced a novel hybrid heat sink filled with PCM and air to effectively reduce electronic device temperature. The hybrid heat sink outperformed both PCM-based and air-cooled heat sinks, especially as the convective coefficient increased.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Article Energy & Fuels

Design and optimization of a liquid cooled heat sink for a motor inverter in electric vehicles

Feng Han et al.

Summary: The study focused on the integrated design of liquid-cooled heat sink for a 30 kW motor inverter, selecting a serpentine channel configuration for its best cooling performance. Further optimization of the heat sink's geometrical configuration led to achieving high power density of 9.677 kW/kg. Experiment results validated the numerical simulation results, showcasing the effectiveness of the design approach.

APPLIED ENERGY (2021)

Article Thermodynamics

A comparison of parallel and colliding jet arrays in a compact vapour compression heat sink for electronics cooling

Marcus Vinicius P. Carneiro et al.

Summary: This study compares the cooling performances of two different multiple orifice spray cooling strategies driven by a compact R-134a vapor compression loop equipped with a small-scale oil-free linear compressor. It found that different spray structures and parameters can achieve different heat transfer performance, and the spray characteristics have a mild effect on the performance parameters of the refrigeration system.

APPLIED THERMAL ENGINEERING (2021)

Article Thermodynamics

A hybrid vapor chamber heat sink incorporating a vapor chamber and liquid cooling channel with outstanding thermal performance and hydraulic characteristics

Huawei Wang et al.

Summary: The hybrid vapor chamber heat sink (HVCHS) incorporates phase change and single-phase heat transfer in a single device, providing high cooling capacity of 1200 W and maintaining a maximum junction temperature of 95.25 degrees C with great temperature uniformity. It has a minimum thermal resistance of 0.04 degrees C/W, minimum pressure drop of 4.83 kPa, and cooling COP above 12,500 for heat inputs of more than 850 W, showing great potential for energy-saving cooling management of high-performance electronics.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Thermodynamics

Entropy and convection effect on magnetized hybrid nano-liquid flow inside a trapezoidal cavity with zigzagged wall

F. Mebarek-Oudina et al.

Summary: This study investigates the laminar flow of a nanoliquid in a trapezoidal cavity and measures the convective exchanges that occur. The results show that the application of a magnetic field strongly influences the flow of the nanofluid, and the thermal performance of the cavity is improved with the increase of Ra and Hartmann numbers.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Review Chemistry, Physical

Recent advances in using nanofluids in renewable energy systems and the environmental implications of their uptake

Omid Mahian et al.

Summary: Nanofluids, mixtures of common liquids and solid nanoparticles with enhanced thermal and optical properties, have been studied for over two decades despite barriers to commercial adoption. Research has focused on the effects of adding nanoparticles on the thermal efficiency and emission reductions in renewable energy systems, particularly in solar systems.

NANO ENERGY (2021)

Article Thermodynamics

Experimental investigation of natural convection heat transfer of SiO2/water nanofluid inside inclined enclosure

Maryam Torki et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

Article Thermodynamics

Numerical analysis of natural convection in a differentially heated packed bed with non-uniform wall temperature

Manu Chakkingal et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Review Thermodynamics

Nanoparticles enhanced phase change materials (NePCMs)-A recent review

Syeda Laraib Tariq et al.

APPLIED THERMAL ENGINEERING (2020)

Article Thermodynamics

Numerical assessment into the hydrothermal and entropy generation characteristics of biological water-silver nano-fluid in a wavy walled microchannel heat sink

Abdullah A. A. A. Al-Rashed et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2019)

Article Thermodynamics

Effect of fin shape on the thermal performance of nanofluid-cooled micro pin-fin heat sinks

Tehmina Ambreen et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Review Thermodynamics

Hybrid nanofluids for heat transfer applications - A state-of-the-art review

Gabriela Huminic et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Article Thermodynamics

Natural convection heat transfer enhancement in new designs of plate-fin based heat sinks

S. Sadrabadi Haghighi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Article Thermodynamics

A hierarchical manifold microchannel heat sink array for high-heat-flux two-phase cooling of electronics

Kevin P. Drummond et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Article Engineering, Mechanical

LBM simulation of free convection in a nanofluid filled incinerator containing a hot block

Mohamed Ammar Abbassi et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Review Thermodynamics

A comprehensive review on rheological behavior of mono and hybrid nanofluids: Effective parameters and predictive correlations

Hossein Khodadadi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Article Thermodynamics

A comprehensive study on heat transfer enhancement in microchannel heat sink with secondary channel

Wan Mohd Arif Aziz Japar et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2018)

Article Thermodynamics

Mixed convection of MHD flow in nanofluid filled and partially heated wavy walled lid-driven enclosure

Hakan F. Oztop et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2017)

Article Thermodynamics

Experimental analysis of energy and friction factor for titanium dioxide nanofluid in a water block heat sink

S. S. Khaleduzzaman et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Article Thermodynamics

Numerical study on turbulent forced convective heat transfer using nanofluids TiO2 in an automotive cooling system

Adnan M. Hussein et al.

CASE STUDIES IN THERMAL ENGINEERING (2017)

Article Thermodynamics

Experimental study on the heat transfer of MWCNT/water nanofluid flowing in a car radiator

Guilherme Azevedo Oliveira et al.

APPLIED THERMAL ENGINEERING (2017)

Article Materials Science, Multidisciplinary

MHD natural convection in an inclined wavy cavity with corner heater filled with a nanofluid

M. A. Sheremet et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2016)

Article Thermodynamics

Intensification of forced convection heat transfer using biological nanofluid in a double-pipe heat exchanger

M. M. Sarafraz et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2015)

Article Thermodynamics

An experimental study on the thermal and hydraulic performances of nanofluids flow in a miniature circular pin fin heat sink

Weerapun Duangthongsuk et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2015)

Article Thermodynamics

Multi-objective optimization of water-cooled pinfin heatsinks

Keisuke Horiuchi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

Article Thermodynamics

Study of forced convection nanofluid heat transfer in the automotive cooling system

Adnan M. Hussein et al.

CASE STUDIES IN THERMAL ENGINEERING (2014)

Article Thermodynamics

Investigation of self-similar heat sinks for liquid cooled electronics

Flavio Brighenti et al.

APPLIED THERMAL ENGINEERING (2013)

Article Thermodynamics

Effect of nanoparticle shape on the heat transfer and thermodynamic performance of a shell and tube heat exchanger

M. M. Elias et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2013)

Article Thermodynamics

CFD modeling (comparing single and two-phase approaches) on thermal performance of Al2o3/water nanofluid in mini-channel heat sink

Mostafa Keshavarz Moraveji et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2013)

Article Thermodynamics

On the Cooling of Electronics With Nanofluids

W. Escher et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2011)

Article Thermodynamics

Experimental determination of thermal conductivity of three nanofluids and development of new correlations

Ravikanth S. Vajjha et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)

Review Thermodynamics

Review of convective heat transfer enhancement with nanofluids

Sadik Kakac et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)

Article Thermodynamics

Nanoparticle-enhanced phase change materials (NEPCM) with great potential for improved thermal energy storage

J. M. Khodadadi et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2007)