4.7 Article

Effect of capillary pressure gradient in microporous layer on proton exchange membrane fuel cell performance

期刊

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
卷 47, 期 40, 页码 17762-17777

出版社

PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.ijhydene.2022.03.265

关键词

Proton exchange membrane fuel cell; (PEMFC); Gas diffusion layer (GDL); Microporous layer (MPL); Capillary pressure gradient

资金

  1. KOSEF/SNU-IAMD
  2. Industrial Strategic Technology Development Program-Development of high durability , high rigid gas diffusion layer for medium and large commercial vehicles - Ministry of Trade, Industry and Energy [NRF-2019R1A4A1025848]
  3. National Research Foundation of Korea - Korean government (MSIT) [20011688]
  4. Korea Evaluation Institute of Industrial Technology (KEIT) [20011688] Funding Source: Korea Institute of Science & Technology Information (KISTI), National Science & Technology Information Service (NTIS)

向作者/读者索取更多资源

The water discharge capability of the gas diffusion layer (GDL) in a proton exchange membrane fuel cell (PEMFC) is significantly influenced by the capillary pressure gradient. This study explores three different methods of manufacturing the microporous layer (MPL) to enhance the capillary pressure gradient and improve the water discharge capability of the GDL. Varying the thickness of the MPL, adding hydrophilic carbon black particles, and adjusting the number of MPL loadings with different viscosities are all found to have a notable effect on the performance of the GDL.
The water discharge capability of the gas diffusion layer (GDL) in a proton exchange membrane fuel cell (PEMFC) is dominantly influenced by the capillary pressure gradient. In this study, three different microporous layer (MPL) manufacturing methods are applied to improve the capillary pressure gradient in the MPL and, consequently, improve the water discharge capability of the GDL. Firstly, the GDL is manufactured by varying the thickness of the MPL. Secondly, hydrophilic carbon black particles are additionally added to the main carbon black particles of the MPL. Finally, different GDLs are fabricated by varying the number of MPL loadings with different viscosities on one side of the substrate. At 100% relative humidity (RH) and a current density of 2.1 A/ cm2, the GDL with a thinner MPL yields 31.9% higher performance than that with a thicker MPL; furthermore, the GDL with the hydrophilic carbon black particles yields 7.2% lower performance than that without the hydrophilic carbon black particles treatment at 100% RH, but the GDL with hydrophilic carbon black particles shows 3.9% higher performance at 30% RH. The GDL loaded with a low-viscosity MPL on top of a high-viscosity MPL demonstrates 81.8% higher performance than that loaded with a low-viscosity MPL alone. (c) 2022 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.7
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据