相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Research on the influence of the discharge breakdown process on the crater formation during EDM
Wenchao Zhang
MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES (2021)
Investigation on hole diameter non-uniformity of hole arrays by ultrasonic vibration-assisted EDM
Yuan Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Effect of Re on mechanical properties of single crystal Ni-based superalloys: Insights from first-principle and molecular dynamics
Ronghai Wu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Investigation on the geometric evolution of microstructures in EDM with a composite laminated electrode
Kai Jiang et al.
JOURNAL OF CLEANER PRODUCTION (2021)
A review on magnetic field assisted electrical discharge machining
Zhen Zhang et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Thermo-fluid multi-physics modeling and experimental verification of volumetric workpiece material removal by a discharge pulse in electric discharge machining process
Oguz Erdem et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2020)
Finite element model for topography prediction of electrical discharge textured surfaces considering multi-discharge phenomenon
S. Jithin et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Molecular dynamics simulation of material removal process and mechanism of EDM using a two-temperature model
Xiaoming Yue et al.
APPLIED SURFACE SCIENCE (2020)
A comprehensive review of electric discharge machining of advanced ceramics
Wuyi Ming et al.
CERAMICS INTERNATIONAL (2020)
Intelligent prognostics of machining tools based on adaptive variational mode decomposition and deep learning method with attention mechanism
Chongdang Liu et al.
NEUROCOMPUTING (2020)
Novel methods for high-speed observation of material removal and molten pool movement in EDM
Xiaoming Yue et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2020)
Thermophysical-Based Modeling of Material Removal in Powder Mixed Near-Dry Electric Discharge Machining
Sanjay Sundriyal et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)
Investigation of a Liquid-Phase Electrode for Micro-Electro-Discharge Machining
Ruining Huang et al.
MICROMACHINES (2020)
Comparative study of energy efficiency and environmental impact in magnetic field assisted and conventional electrical discharge machining
Wuyi Ming et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Thermo-electrical coupling simulation of powder mixed EDM SiC/Al functionally graded materials
L. Tang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Investigation on machining performance of micro-holes EDM in ZrB2-SiC ceramics using a magnetic suspension spindle system
Yerui Feng et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Investigating the effects of external magnetic field on machining characteristics of electrical discharge machining process, numerically and experimentally
Mohammad Reza Shabgard et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Liquid-phase alloy as a microfluidic electrode for micro-electro-discharge patterning
Ruining Huang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
A study on EDM debris particle size and flushing mechanism for efficient debris removal in EDM-drilling of Inconel 718
M. Tanjilul et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Thermal simulation of machining of alumina with wire electrical discharge machining process using assisting electrode
Meinam Annebushan Singh et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2018)
Investigation for the presence of chaos in surface topography generated by EDM
Ushasta Aich
TRIBOLOGY INTERNATIONAL (2018)
Unexpected Event Prediction in Wire Electrical Discharge Machining Using Deep Learning Techniques
Jose A. Sanchez et al.
MATERIALS (2018)
Formation of the workpiece shape and surface finish during electrical discharge machining
V. V. Lyubimov et al.
19TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (2018)
Research on the energy distribution of micro EDM by utilization of electro-thermal model
Kan Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Molecular dynamics simulation of material removal process and crystal structure evolution in EDM with discharge on different crystal planes
Xiaoming Yue et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Theoretical and experimental study of magnetic-assisted finish cutting ferromagnetic material in WEDM
Zhi Chen et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)
Study on machining characteristics of WEDM with ultrasonic vibration and magnetic field assisted techniques
Zhen Zhang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Development of a Thermo-Physical Model for Multi-spark Wire EDM Process
Shantanu Shahane et al.
44TH NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 44 (2016)
Study on the distribution of removal material of EDM in deionized water and gas with molecular dynamics simulation
Xiaoming Yue et al.
18TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM XVIII) (2016)
Modeling of White Layer Formation in Electric Discharge Machining (EDM) by Incorporating Massive Random Discharge Characteristics
J. F. Liu et al.
18TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM XVIII) (2016)
Three-dimensional numerical simulation of microelectric discharge machining of Ti-6Al-4V
B. Kuriachen et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Molecular Dynamics Simulation to Investigate the Influence of SBS on Molecular Agglomeration Behavior of Asphalt
Yongjie Ding et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2015)
Deep learning in neural networks: An overview
Juergen Schmidhuber
NEURAL NETWORKS (2015)
Molecular dynamics simulation of the material removal process and gap phenomenon of nano EDM in deionized water
Xiaoming Yue et al.
RSC ADVANCES (2015)
Reformulation of the Nose-Hoover thermostat for heat conduction simulation at nanoscale
Jiaoyan Li et al.
ACTA MECHANICA (2014)
Investigation of the removing process of cathode material in micro-EDM using an atomistic-continuum model
Jianwen Guo et al.
APPLIED SURFACE SCIENCE (2014)
Study of the machining process of nano-electrical discharge machining based on combined atomistic-continuum modeling method
Guojun Zhang et al.
APPLIED SURFACE SCIENCE (2014)
A hybrid process model for EDM based on finite-element method and Gaussian process regression
Wuyi Ming et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
A novel method of determining energy distribution and plasma diameter of EDM
Yanzhen Zhang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)
Simulation model of debris and bubble movement in consecutive-pulse discharge of electrical discharge machining
Jin Wang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2014)
Modelling of ECM and EDM processes
S. Hinduja et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
Optimization of cutting conditions of YG15 on rough and finish cutting in WEDM based on statistical analyses
Yu Huang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Mathematical and numerical modeling of the effect of input-parameters on the flushing efficiency of plasma channel in EDM process
Mohammadreza Shabgard et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Molecular dynamics simulation of residual stress generated in EDM
X. Yang et al.
PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM) (2013)
Experimental study of distribution of energy during EDM process for utilization in thermal models
Harminder Singh
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)
Clarification of EDM Phenomena by Spectroscopic Analysis
Chao Qu et al.
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING (2012)
Molecular dynamics simulation of the material removal mechanism in micro-EDM
Xiaodong Yang et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2011)
Thermo-physical modeling of die-sinking EDM process
S.N. Joshi et al.
Journal of Manufacturing Processes (2010)
Thermal modeling of the material removal rate and surface roughness for die-sinking EDM
K. Salonitis et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Development of an intelligent process model for EDM
S. N. Joshi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
A numerical model of the EDM process considering the effect of multiple discharges
B. Izquierdo et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Surface roughness model for micro electrical discharge machining
W. Kurnia et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2009)
MODELLING ASPECTS OF REMOVAL MECHANISM AT ULTRASONIC AIDED ELECTRODISCHARGE MACHINING
D. Ghiculescu et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2009)
Spectroscopic measurement of arc plasma diameter in EDM
A. Kojima et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
Machining characteristics of magnetic force-assisted EDM
Yan-Cherng Lin et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Modelling of overlapping craters in micro-electrical discharge machining
P. C. Tan et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2008)
Numerical simulation of powder mixed electric discharge machining (PMEDM) using finite element method
H. K. Kansal et al.
MATHEMATICAL AND COMPUTER MODELLING (2008)
Electro-thermal modelling of anode and cathode in micro-EDM
S. H. Yeo et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2007)
Numerical study of thermal aspects of electric discharge machining process
Nizar Ben Salah et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
A finite element model of EDM based on the Joule effect
J Marafona et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Parametric optimization of powder mixed electrical discharge machining by response surface methodology
HK Kansal et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Comparison of measured and simulated crater morphology for EDM
HP Schulze et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Workpiece surface modification using electrical discharge machining
J Simao et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
Surface modification process by electrical discharge machining with a Ti powder green compact electrode
ZL Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Thermal stresses due to electrical discharge machining
V Yadav et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)
Morphology and hardness of a steel surface layer after electric-spark alloying with TiN-Nialloys
AV Paustovskii et al.
POWDER METALLURGY AND METAL CERAMICS (2002)
Structural stability and lattice defects in copper:: Ab initio, tight-binding, and embedded-atom calculations -: art. no. 224106
Y Mishin et al.
PHYSICAL REVIEW B (2001)
Accretion of titanium carbide by electrical discharge machining with powder suspended in working fluid
K Furutani et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2001)
The potential of plating techniques in the development of rapid EDM tooling
FEH Tay et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2001)
Machining characteristics of titanium alloy (Ti-6Al-4V) using a combination process of EDM with USM
YC Lin et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2000)