☆ 4.5 Article

Uncertainty quantification in fatigue crack-growth predictions

INTERNATIONAL JOURNAL OF FRACTURE (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Computer Science, Interdisciplinary Applications

Computational modeling of three-dimensional mixed mode-I/II/III fatigue crack growth problems and experiments

Ali O. Ayhan et al.

Summary: The study conducted experiments and numerical simulations on mixed mode I/II/III fatigue crack growth, evaluating a new 3-D fracture criterion for its applicability in 3-D mixed mode fatigue problems. The developed criterion showed better predictability for crack growth surface under highly mixed mode conditions, reducing deviation from experimental surface compared to other criteria.

COMPUTERS & STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

Probabilistic modeling of uncertainties in fatigue reliability analysis of turbine bladed disks

Xiao-Peng Niu et al.

Summary: The study developed a general framework for fatigue reliability analysis by coupling Latin hypercube sampling with FE analysis to describe the combined effects of multi-source uncertainties on turbine bladed disks. Sensitivity analysis on geometrical uncertainty of the bladed disk showed its critical influence on fatigue lifetime and reliability. The study also highlighted the importance of geometric uncertainty factor in fatigue reliability of engineering components.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

添加到收藏夹

Article Mechanics

Corrosion fatigue lifetime assessment of high-speed railway axle EA4T steel with artificial scratch

Yanan Hu et al.

Summary: The study found that railway EA4T alloy steel is very sensitive to chloride-containing environments, with cracking occurring in rotating bending tests, and scratched specimens having shorter lifetimes. The research also showed that the corrosive environment facilitates crack initiation without the need for corrosion pits.

ENGINEERING FRACTURE MECHANICS (2021)

添加到收藏夹

Article Engineering, Mechanical

Stochastic approach to fatigue crack-growth simulation for a railway axle under input data variability

V. Giannella

Summary: The study focuses on the stochastic nature of fatigue crack-growth in mechanical components and the prediction of residual fatigue life of a railway axle under different input parameters variability. Various sources of uncertainty are considered in the analysis.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

添加到收藏夹

Article Mechanics

Mixed-mode crack growth simulation in aviation engine compressor disk

V. Shlyannikov et al.

Summary: This study focuses on a mixed mode crack growth analysis of an aviation gas turbine engine (GTE) compressor disk based on simulation principles. Three geometries for simulation models of the GTE compressor disk are proposed, with biaxial loading conditions determined and numerically verified to reproduce the stress-strain state in critical zones during operation. Elastic-plastic fracture mechanical parameters are determined through a 3D full-size finite element method (FEM) analysis for the GTE compressor disk and simulation models, based on operating loading conditions.

ENGINEERING FRACTURE MECHANICS (2021)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

Fatigue crack-growth predictions for a railway axle under material data variability

V Giannella

Summary: This document presents a probabilistic approach for predicting the residual fatigue life of a cracked railway axle, taking into account the variability of input data. The NASGRO formulation and load spectrum were used to make predictions, with results also informing deterministic approaches for calculating conservative crack-growth assessments.

49TH ITALIAN ASSOCIATION FOR STRESS ANALYSIS CONFERENCE (AIAS 2020) (2021)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

Deterministic fatigue crack-growth simulations for a railway axle by Dual Boundary Element Method

V Giannella et al.

Summary: The study focused on the crack propagation of railway axles and its influence on NDT inspection intervals, providing specific conclusions through calculations and simulations, leading to estimates of residual fatigue life.

49TH ITALIAN ASSOCIATION FOR STRESS ANALYSIS CONFERENCE (AIAS 2020) (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

The effect of manufacturing defects on the high-cycle fatigue of electron-beam-welded Ti-6Al-4V titanium alloy: experimental and numerical analysis

Felice Rubino et al.

Summary: This study used electron-beam welding to conduct HCF fatigue tests, finding that weld defects affect fatigue life, and the geometry produced by the welding process and stress raisers play a critical role.

MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES (2021)

添加到收藏夹

Article Engineering, Manufacturing

Automated laser polishing for surface finish enhancement of additive manufactured components for the automotive industry

Alessandra Caggiano et al.

Summary: An innovative laser polishing process involving laser beam wobbling is developed to enhance the surface finish of additive manufactured parts made of Cr-Cu precipitation hardening steel. Machine learning-based CNN processing of polished surface images is utilized for automatic identification of optimal LP conditions.

PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2021)

添加到收藏夹

Article Mechanics

A probabilistic framework to define the design stress and acceptable defects under combined-cycle fatigue conditions

L. Patriarca et al.

ENGINEERING FRACTURE MECHANICS (2020)

添加到收藏夹

Article Mechanics

Bayesian-based probabilistic fatigue crack growth evaluation combined with machine-learning-assisted GPR

Dianyin Hu et al.

ENGINEERING FRACTURE MECHANICS (2020)

添加到收藏夹

Article Engineering, Mechanical

A probabilistic Haigh diagram based on a weakest link approach

Alexander Klawonn et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Review Engineering, Manufacturing

Ultrasonic welding of magnesium alloys: a review

Felice Rubino et al.

MATERIALS AND MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Probabilistic Analysis of Fatigue Behavior of Single Lap Riveted Joints

Enrico Armentani et al.

APPLIED SCIENCES-BASEL (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Novel hybrid robust method for uncertain reliability analysis using finite conjugate map

Shun-Peng Zhu et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)

添加到收藏夹

Article Engineering, Industrial

Machine learning-based image processing for on-line defect recognition in additive manufacturing

Alessandra Caggiano et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Mechanical

Quantitative dependence of oxide-induced crack closure on air humidity for railway axle steel

T. Vojtek et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

添加到收藏夹

Article Engineering, Mechanical

Combined static-cyclic multi-axial crack propagation in cruciform specimens

Venanzio Giannella et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

添加到收藏夹

Article Engineering, Mechanical

Experimental and FEM numerical assessment of multiaxial fatigue failure criteria for a rolling Stock's seats structure

R. Sepe et al.

ENGINEERING FAILURE ANALYSIS (2019)

添加到收藏夹

Article Engineering, Mechanical

Surface crack modelling in an engine compressor disc

V Giannella et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Multi-axial fatigue numerical crack propagations in cruciform specimens

Venanzio Giannella et al.

FRATTURA ED INTEGRITA STRUTTURALE (2019)

添加到收藏夹

Article Engineering, Mechanical

Dual boundary element method and finite element method for mixed-mode crack propagation simulations in a cracked hollow shaft

R. Citarella et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Probabilistic fatigue life prediction and reliability assessment of a high pressure turbine disc considering load variations

Shun-Peng Zhu et al.

INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2018)

添加到收藏夹

Article Mechanics

On the distribution and scatter of fatigue lives obtained by integration of crack growth curves: Does initial crack size distribution matter?

M. Ciavarella et al.

ENGINEERING FRACTURE MECHANICS (2018)

添加到收藏夹

Article Engineering, Mechanical

Fatigue reliability assessment of turbine discs under multi-source uncertainties

S. P. Zhu et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2018)

添加到收藏夹

Article Nuclear Science & Technology

Overview of fatigue life assessment of baffles in Wendelstein 7-X

Joris Fellinger et al.

FUSION ENGINEERING AND DESIGN (2018)

添加到收藏夹

Article Engineering, Mechanical

Computational-experimental approaches for fatigue reliability assessment of turbine bladed disks

Shun-Peng Zhu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

FEM-DBEM approach to simulate crack propagation in a turbine vane segment undergoing a fatigue load spectrum

Venanzio Giannella et al.

AIAS 2018 INTERNATIONAL CONFERENCE ON STRESS ANALYSIS (2018)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

LCF assessment on heat shield components of nuclear fusion experiment Wendelstein 7-X by critical plane criteria

V. Giannella et al.

AIAS2017 - 46TH CONFERENCE ON STRESS ANALYSIS AND MECHANICAL ENGINEERING DESIGN (2018)

添加到收藏夹

Article Engineering, Mechanical

Fatigue lifetime estimation of railway axles

Lubos Nahlik et al.

ENGINEERING FAILURE ANALYSIS (2017)

添加到收藏夹

Article Mechanics

Crack closure in near-threshold fatigue crack propagation in railway axle steel EA4T

P. Pokorny et al.

ENGINEERING FRACTURE MECHANICS (2017)

添加到收藏夹

Article Mechanics

Fatigue life assessment in lateral support element of a magnet for nuclear fusion experiment Wendelstein 7-X

V. Giannella et al.

ENGINEERING FRACTURE MECHANICS (2017)

添加到收藏夹

Article Automation & Control Systems

Laser powder-bed fusion of Inconel 718 to manufacture turbine blades

Fabrizia Caiazzo et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Mechanical

Probabilistic framework for multiaxial LCF assessment under material variability

S. P. Zhu et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

添加到收藏夹

Article Engineering, Mechanical

Fatigue probability assessment including aleatory and epistemic uncertainty with application to gas turbine compressor blades

Daniel Sandberg et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

添加到收藏夹

Article Engineering, Mechanical

Efficient FEM-DBEM coupled approach for crack propagation simulations

V. Giannella et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2017)

添加到收藏夹

Article Green & Sustainable Science & Technology

Evaluation of Fatigue Crack Propagation of Gears Considering Uncertainties in Loading and Material Properties

Haileyesus B. Endeshaw et al.

SUSTAINABILITY (2017)

添加到收藏夹

Article Engineering, Mechanical

Probabilistic fatigue assessment for railway axles and derivation of a simple format for damage calculations

S. Beretta et al.

INTERNATIONAL JOURNAL OF FATIGUE (2016)

添加到收藏夹

Article Engineering, Mechanical

Load interaction effects in propagation lifetime and inspections of railway axles

S. Beretta et al.

INTERNATIONAL JOURNAL OF FATIGUE (2016)

添加到收藏夹

Article Engineering, Mechanical

A log-normal format for failure probability under LCF: Concept, validation and definition of design curve

S. Beretta et al.

INTERNATIONAL JOURNAL OF FATIGUE (2016)

添加到收藏夹

Article Engineering, Mechanical

Multiple crack growth prediction in AA2024-T3 friction stir welded joints, including manufacturing effects

Pierpaolo Carlone et al.

INTERNATIONAL JOURNAL OF FATIGUE (2016)

添加到收藏夹

Article Engineering, Mechanical

Cyclic plastic strain based damage tolerance for railway axles in China

S. C. Wu et al.

INTERNATIONAL JOURNAL OF FATIGUE (2016)

添加到收藏夹

Article Engineering, Mechanical

Residual fatigue lifetime estimation of railway axles for various loading spectra

Pavel Pokorny et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2016)

添加到收藏夹

Article Engineering, Mechanical

FEM-DBEM approach for crack propagation in a low pressure aeroengine turbine vane segment

Roberto Citarella et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2016)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

Influence of variable stress ratio during train operation on residual fatigue lifetime of railway axles

Pavel Pokorny et al.

21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21) (2016)

添加到收藏夹

Article Mechanics

Probabilistic life assessment on fatigue crack growth in mixed-mode by coupling of Kriging model and finite element analysis

Wentao He et al.

ENGINEERING FRACTURE MECHANICS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Robust design of a polygonal shaft-hub coupling

R. Citarella et al.

FRATTURA ED INTEGRITA STRUTTURALE (2015)

添加到收藏夹

Article Engineering, Mechanical

Modified NASGRO equation for physically short cracks

J. Maierhofer et al.

INTERNATIONAL JOURNAL OF FATIGUE (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

Uncertainty Quantification in Multiscale Simulation of Materials: A Prospective

Aleksandr Chernatynskiy et al.

ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 43 (2013)

添加到收藏夹

Article Engineering, Mechanical

Reducing uncertainty in fatigue life limits of turbine engine alloys

J. M. Larsen et al.

INTERNATIONAL JOURNAL OF FATIGUE (2013)

添加到收藏夹

Article Engineering, Multidisciplinary

A comprehensive framework for verification, validation, and uncertainty quantification in scientific computing

Christopher J. Roy et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2011)

添加到收藏夹

Article Mechanics

Fatigue crack growth in railway axles: Assessment concept and validation tests

M. Luke et al.

ENGINEERING FRACTURE MECHANICS (2011)

添加到收藏夹

Article Engineering, Mechanical

Corrosion-fatigue of A1N railway axle steel exposed to rainwater

S. Beretta et al.

INTERNATIONAL JOURNAL OF FATIGUE (2010)

添加到收藏夹

Article Engineering, Mechanical

Probabilistic fatigue life prediction using AFGROW and accounting for material variability

William A. Grell et al.

INTERNATIONAL JOURNAL OF FATIGUE (2010)

添加到收藏夹

Article Engineering, Civil

A Bayesian analysis of fatigue data

Maurizio Guida et al.

STRUCTURAL SAFETY (2010)

添加到收藏夹

Article Mechanics

Experiments and stochastic model for propagation lifetime of railway axles

S. Beretta et al.

ENGINEERING FRACTURE MECHANICS (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

A generalized Paris' law for fatigue crack growth

N. Pugno et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2006)

添加到收藏夹

Article Engineering, Civil

Application of fatigue crack growth algorithms to railway axles and comparison of two steel grades

S Beretta et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT (2004)

添加到收藏夹

Article Engineering, Mechanical

A new approach to the correlation between the coefficient and the exponent in the power law equation of fatigue crack growth

F Bergner et al.

INTERNATIONAL JOURNAL OF FATIGUE (2000)

添加到收藏夹

Article Engineering, Aerospace

Manufacturing turbine blisks

H Zhan et al.

AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.