相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Characterization of Strain-Controlled Low-Cycle fatigue and fracture behavior of P91 steel at elevated temperatures
Thanh Tuan Nguyen et al.
ENGINEERING FAILURE ANALYSIS (2022)
Study on Microstructure and Mechanical Properties of Laser Welded Dissimilar Joint of P91 Steel and INCOLOY 800HT Nickel Alloy
Vishwa Bhanu et al.
MATERIALS (2021)
Study on effect of grain refinement of P92 steel base plate on mechanical and microstructural features of the welded joint
Balamurugan Adhithan et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2021)
The low-cycle fatigue property, damage mechanism and life prediction of compacted graphite iron: Influence of strain rate
C. L. Zou et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Insight into Type IV cracking in Grade 91 steel weldments
Yiyu Wang et al.
MATERIALS & DESIGN (2020)
Experimental and numerical investigation of the weld geometry effects on Type IV cracking behaviour in P91 steel
A. Mehmanparast et al.
ENGINEERING FAILURE ANALYSIS (2020)
Effect of change in microstructures due to simulation temperatures on the low cycle fatigue behavior of P91 steel
K. Mariappan et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Effect of cyclic softening and stress relaxation on fatigue behavior of 2.25Cr1Mo0.25V steel under strain-controlled fatigue-creep interaction at 728 K
Zizhen Zhao et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Effects of fatigue testing on low-cycle properties of P91 steel
Stanislaw Mrozinski et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Effect of post weld heat treatments on microstructure evolution and type IV cracking behavior of the P91 steel welds joint
Chandan Pandey et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Some studies on P91 steel and their weldments
Chandan Pandey et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Effect of strain rate and notch geometry on tensile properties and fracture mechanism of creep strength enhanced ferritic P91 steel
Chandan Pandey et al.
JOURNAL OF NUCLEAR MATERIALS (2018)
Homogenization of P91 weldments using varying normalizing and tempering treatment
Chandan Pandey et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Transition from Type IV to Type I cracking in heat-treated grade 91 steel weldments
Yiyu Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Comparative study of autogenous tungsten inert gas welding and tungsten arc welding with filler wire for dissimilar P91 and P92 steel weld joint
Chandan Pandey et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of post weld heat treatments on fracture frontier and type IV cracking nature of the crept P91 welded sample
Chandan Pandey et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Correlation Between Intercritical Heat-Affected Zone and Type IV Creep Damage Zone in Grade 91 Steel
Yiyu Wang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Effect of creep phenomena on room-temperature tensile properties of cast & forged P91 steel
Chandan Pandey et al.
ENGINEERING FAILURE ANALYSIS (2017)
Study of the fracture surface morphology of impact and tensile tested cast and forged (C&F) Grade 91 steel at room temperature for different heat treatment regimes
Chandan Pandey et al.
ENGINEERING FAILURE ANALYSIS (2017)
Low cycle fatigue behaviour of Grade 92 steel weld joints
J. Veerababu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Effect of normalization and tempering on microstructure and mechanical properties of V-groove and narrow-groove P91 pipe weldments
Chandan Pandey et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Low cycle fatigue behavior of a 10Cr-2W-Mo-3Co-NbV steel
R. Mishnev et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
Low-Cycle Fatigue Properties of P92 Ferritic-Martensitic Steel at Elevated Temperature
Zhen Zhang et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)
Type IV cracking behaviour of modified 9Cr-1Mo steel weld joints
T. Sakthivel et al.
MATERIALS AT HIGH TEMPERATURES (2016)
Toward Improving the Type IV Cracking Resistance in Cr-Mo Steel Weld Through Thermo-Mechanical Processing
Benjamin A. Shassere et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Low cycle fatigue behavior of a ferritic reactor pressure vessel steel
Apu Sarkar et al.
JOURNAL OF NUCLEAR MATERIALS (2015)
Low-cyclic fatigue behavior of modified 9Cr-1Mo steel at elevated temperature
Krishna Guguloth et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Influence of welding process on Type IV cracking behavior of P91 steel
M. Divya et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Crack growth behavior of 9Cr-1Mo (P91) steel under creep-fatigue conditions
S. B. Narasimhachary et al.
INTERNATIONAL JOURNAL OF FATIGUE (2013)
Influence of dynamic strain aging pre-treatment on the low-cycle fatigue behavior of modified 9Cr-1Mo steel
HongWei Zhou et al.
INTERNATIONAL JOURNAL OF FATIGUE (2013)
Review of type IV cracking of weldments in 9-12%Cr creep strength enhanced ferritic steels
D. J. Abson et al.
INTERNATIONAL MATERIALS REVIEWS (2013)
Formation Mechanism of Type IV Failure in High Cr Ferritic Heat-Resistant Steel-Welded Joint
Y. Liu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Experimental study on creep damage evolution process of Type IV cracking in 9Cr-0.5Mo-1.8W-VNb steel welded joint
Lei Zhao et al.
ENGINEERING FAILURE ANALYSIS (2012)
Low cycle fatigue and thermo-mechanical fatigue behavior of modified 9Cr-1Mo ferritic steel at elevated temperatures
Vani Shankar et al.
JOURNAL OF NUCLEAR MATERIALS (2012)
Microstructure and type IV cracking behavior of HAZ in P92 steel weldment
Wang Xue et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Transition of Crack from Type IV to Type II Resulting from Improved Utilization of Boron in the Modified 9Cr-1Mo Steel Weldment
C. R. Das et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
Microstructural changes in creep exposed P91 steel weld joint
Dagmar Jandova et al.
MATERIALS AT HIGH TEMPERATURES (2011)
Recent developments in local concepts of fatigue assessment of welded joints
D. Radaj et al.
INTERNATIONAL JOURNAL OF FATIGUE (2009)
Microstructure and Mechanical Properties of 9Cr-1Mo Steel Weld Fusion Zones as a Function of Weld Metal Composition
B. Arivazhagan et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2009)
Type IV Cracking Susceptibility in Weld Joints of Different Grades of Cr-Mo Ferritic Steel
K. Laha et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Characterization of microstructures across the heat-affected zone of the modified 9Cr-1 Mo weld joint to understand its role in promoting type IV cracking
K. Laha et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2007)
Type IV cracking in ferritic power plant steels
J. A. Francis et al.
MATERIALS SCIENCE AND TECHNOLOGY (2006)
Creep damage evaluation of 9Cr-1Mo-V-Nb steel welded joints showing Type IV fracture
T Watanabe et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2006)
Stabilization of martensitic microstructure in advanced 9Cr steel during creep at high temperature
F Abe et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Comparative evaluation of strain controlled low cycle fatigue behaviour of solution annealed and prior cold worked 316L(N) stainless steel
VS Srinivasan et al.
INTERNATIONAL JOURNAL OF FATIGUE (2004)
Characterization of carbides at different boundaries of 9Cr-steel
K Kaneko et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Influence of temperature on the low cycle fatigue behaviour of a modified 9Cr-1Mo ferritic steel
A Nagesha et al.
INTERNATIONAL JOURNAL OF FATIGUE (2002)
Some new methods for predicting fatigue in welded joints
D Taylor et al.
INTERNATIONAL JOURNAL OF FATIGUE (2002)
Microstructure and tensile properties of modified 9Cr-1Mo steel (grade 91)
KS Chandravathi et al.
MATERIALS SCIENCE AND TECHNOLOGY (2001)