☆ 4.7 Article

Study of substrate-free microporous layer of proton exchange membrane fuel cells

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Water management characteristics of electrospun micro-porous layer in PEMFC under normal temperature and cold start conditions

Chaoming Li et al.

Summary: Electrospun MPL showed better performance under high relative humidities at 70 degrees Celsius, reducing mass transport losses and improving fuel cell efficiency. In cold start conditions, electrospun MPL may facilitate water removal from the catalyst layer, leading to longer electricity generation in fuel cells.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

添加到收藏夹

Article Polymer Science

Effects of thickness and hydrophobicity of double microporous layer on the performance in proton exchange membrane fuel cells

Guangyi Lin et al.

Summary: This paper designed a multi-layer gas diffusion layer and investigated the effects of thickness and hydrophobicity on fuel cell performance. The results showed that thickness adjustment is more favorable for water discharge under high humidity, while gradient hydrophobic design is more effective under low humidity.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Experimental and computational study of the microporous layer and hydrophobic treatment in the gas diffusion layer of a proton exchange membrane fuel cell

Mrittunjoy Sarker et al.

Summary: Enabling fuel cell operation at high current density requires addressing liquid water management issues, with PTFE impregnation and MPL showing potential performance improvements. Studies using experimental and computational techniques have revealed the effects of these materials, and a model has been developed to simulate fuel cell performance.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Article Chemistry, Physical

Enhanced mass transfer and proton conduction of cathode catalyst layer for proton exchange membrane fuel cell through filling polyhedral oligomeric silsesquioxane

Qiong Xue et al.

Summary: The addition of 15% POSS in the cathode catalyst layer significantly improves the efficiency and performance of PEMFC, especially in high humidity conditions. POSS improves the arrangement of water molecules and promotes proton transfer through a hopping mechanism.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microporous Layer Containing CeO2-Doped 3D Graphene Foam for Proton Exchange Membrane Fuel Cells at Varying Operating Conditions

Liang Chen et al.

Summary: To improve the interfacial mass-transfer efficiency, microporous layers (MPLs) containing CeO2 nanorods and the CeO2 nano-network were prepared for proton exchange membrane fuel cells (PEMFCs). CeO2-doped 3D-GF improved the reaction kinetics of the cathode effectively and worked as the water receiver to prevent the dehydration of MEAs at dry operating condition, while also providing the pathway for water removal at a high current density or humid operating condition.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Energy & Fuels

A novel hydrophilic-modified gas diffusion layer for proton exchange membrane fuel cells operating in low humidification

Zhicheng Liu et al.

Summary: A novel hydrophilic-modified gas diffusion layer (GDL) with Polyacrylonitrile (PAN) has been fabricated to improve the performance of proton exchange membrane fuel cells (PEMFCs) under low humidity. The addition of PAN in the cathode GDL significantly increases the power density by 30% under low humidity, without affecting the performance under full humidity.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

添加到收藏夹

Article Electrochemistry

Influence of platinum dispersity on oxygen transport resistance and performance in PEMFC

Xinye Sun et al.

ELECTROCHIMICA ACTA (2020)

添加到收藏夹

Article Chemistry, Physical

Identification of performance degradations in catalyst layer and gas diffusion layer in proton exchange membrane fuel cells

Xu Zhang et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Highly Ordered Nanoporous Carbon Scaffold with Controllable Wettability as the Microporous Layer for Fuel Cells

Muhammad Naoshad Islam et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Polymer Science

Preparation of graded microporous layers for enhanced water management in fuel cells

Guangyi Lin et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Structural design of gas diffusion layer for proton exchange membrane fuel cell at varying humidification

Liang Chen et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Energy & Fuels

Detailed optimization of multiwall carbon nanotubes doped microporous layer in polymer electrolyte membrane fuel cells for enhanced performance

Rui Lin et al.

APPLIED ENERGY (2020)

添加到收藏夹

Article Energy & Fuels

Polytetrafluoroethylene content in standalone microporous layers: Tradeoff between membrane hydration and mass transport losses in polymer electrolyte membrane fuel cells

A. K. C. Wong et al.

APPLIED ENERGY (2019)

添加到收藏夹

Article Chemistry, Physical

Microporous layer to carbon fibre substrate interface impact on polymer electrolyte membrane fuel cell performance

J. Lee et al.

JOURNAL OF POWER SOURCES (2019)

添加到收藏夹

Review Thermodynamics

A review of gas diffusion layers for proton exchange membrane fuel cells-With a focus on characteristics, characterization techniques, materials and designs

Adnan Ozden et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2019)

添加到收藏夹

Article Chemistry, Analytical

A new method for optimal fabrication of carbon composite paper as gas diffusion layer used in proton exchange membrane of fuel cells

Reza Taherian et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2018)

添加到收藏夹

Article Chemistry, Physical

Application of a self-supporting microporous layer to gas diffusion layers of proton exchange membrane fuel cells

Hiroshi Ito et al.

JOURNAL OF POWER SOURCES (2017)

添加到收藏夹

Article Chemistry, Physical

Novel electrospun gas diffusion layers for polymer electrolyte membrane fuel cells: Part I. Fabrication, morphological characterization, and in situ performance

S. Chevalier et al.

JOURNAL OF POWER SOURCES (2017)

添加到收藏夹

Article Chemistry, Physical

Microporous layers based on poly(vinylidene fluoride) and sulfonated poly(vinylidene fluoride)

Aldo Bottino et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

添加到收藏夹

Article Electrochemistry

Synchrotron Investigation of Microporous Layer Thickness on Liquid Water Distribution in a PEM Fuel Cell

J. Lee et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

添加到收藏夹

Article Chemistry, Physical

Liquid water breakthrough pressure through gas diffusion layer of proton exchange membrane fuel cell

Mehdi Mortazaui et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

添加到收藏夹

Proceedings Paper Electrochemistry

Investigation of Interfacial Water Transport at the Gas Diffusion Media by Neutron Radiography

T. Kotaka et al.

POLYMER ELECTROLYTE FUEL CELLS 14 (2014)

添加到收藏夹

Article Chemistry, Physical

Decreasing contact resistance in proton-exchange membrane fuel cells with metal bipolar plates

Christopher J. Netwall et al.

JOURNAL OF POWER SOURCES (2013)

添加到收藏夹

Article Chemistry, Physical

The influence of porous transport layer modifications on the water management in polymer electrolyte membrane fuel cells

R. Alink et al.

JOURNAL OF POWER SOURCES (2013)

添加到收藏夹

Article Green & Sustainable Science & Technology

Development of a porosity-graded micro porous layer using thermal expandable graphite for proton exchange membrane fuel cells

Jeong Hwan Chun et al.

RENEWABLE ENERGY (2013)

添加到收藏夹

Article Chemistry, Physical

Ultra thin gas diffusion layer development for PEMFC

Chien-Hsin Hung et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)

添加到收藏夹

Review Chemistry, Physical

A review of gas diffusion layer in PEM fuel cells: Materials and designs

Sehkyu Park et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)

添加到收藏夹

Article Chemistry, Physical

Laser perforated fuel cell diffusion media. Part I: Related changes in performance and water content

M. P. Manahan et al.

JOURNAL OF POWER SOURCES (2011)

添加到收藏夹

Article Chemistry, Physical

Determination of the pore size distribution of micro porous layer in PEMFC using pore forming agents under various drying conditions

Jeong Hwan Chun et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)

添加到收藏夹

Article Chemistry, Physical

Optimal microporous layer for proton exchange membrane fuel cell

Wei-Mon Yan et al.

JOURNAL OF POWER SOURCES (2010)

添加到收藏夹

Article Chemistry, Physical

Stability and performance improvement of a polymer electrolyte membrane fuel cell stack by laser perforation of gas diffusion layers

Dietmar Gerteisen et al.

JOURNAL OF POWER SOURCES (2010)

添加到收藏夹

Article Chemistry, Physical

Fabrication of a carbon nanofiber sheet as a micro-porous layer for proton exchange membrane fuel cells

Qiongjuan Duan et al.

JOURNAL OF POWER SOURCES (2010)

添加到收藏夹

Article Chemistry, Physical

Development of carbon nanotubes based gas diffusion layers by in situ chemical vapor deposition process for proton exchange membrane fuel cells

A. M. Kannan et al.

JOURNAL OF POWER SOURCES (2009)

添加到收藏夹

Article Chemistry, Physical

Effect of preparative parameters on the characteristic of poly(vinylidene fluoride)-based microporous layer for proton exchange membrane fuel cells

Ai Lien Ong et al.

JOURNAL OF POWER SOURCES (2008)

添加到收藏夹

Article Chemistry, Physical

Enhancing liquid water transport by laser perforation of a GDL in a PEM fuel cell

D. Gerteisen et al.

JOURNAL OF POWER SOURCES (2008)

添加到收藏夹

Article Chemistry, Physical

Facilitating mass transport in gas diffusion layer of PEMFC by fabricating micro-porous layer with dry layer preparation

Jian Chen et al.

JOURNAL OF POWER SOURCES (2008)

添加到收藏夹

Article Chemistry, Physical

Highly efficient single-layer gas diffusion layers for the proton exchange membrane fuel cell

T. F. Hung et al.

JOURNAL OF POWER SOURCES (2008)

添加到收藏夹

Article Chemistry, Physical

Novel single-layer gas diffusion layer based on PTFE/carbon black composite for proton exchange membrane fuel cell

Y. W. Chen-Yang et al.

JOURNAL OF POWER SOURCES (2007)

添加到收藏夹

Article Chemistry, Physical

Adoption of nano-materials for the micro-layer in gas diffusion layers of PEMFCs

Gu-Gon Park et al.

JOURNAL OF POWER SOURCES (2006)

添加到收藏夹

Article Electrochemistry

Preparing gas-diffusion layers of PEMFCs with a dry deposition technique

JR Yu et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2005)

添加到收藏夹

Article Electrochemistry

Effects of hydrophobic polymer content in GDL on power performance of a PEM fuel cell

C Lim et al.

ELECTROCHIMICA ACTA (2004)

添加到收藏夹

Article Chemistry, Physical

Influence of pore-size distribution of diffusion layer on mass-transport problems of proton exchange membrane fuel cells

CS Kong et al.

JOURNAL OF POWER SOURCES (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.