4.7 Article

The energy analysis and performance of heavy-duty diesel engine with n-butanol addition and different coolant temperature

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Energy & Fuels

Energy, exergy, thermoeconomic and sustainability assessment of tire pyrolysis oil in common rail direct injection diesel engine

Haseeb Yaqoob et al.

Summary: Waste to fuel conversion is important due to fuel demand, waste disposal issues, and environmental and economic impact. This study examines the energy, exergy, thermoeconomic, and sustainability aspects of tire pyrolysis oil (TPO)-diesel blends. The results show that DP10 (Diesel 90%-TPO 10%) performs the best in terms of energy and exergy efficiency, as well as sustainability.
Article Energy & Fuels

Development of a skeletal combustion mechanism for natural gas engine using n-butanol-diesel blend as pilot fuel

Yuqiang Li et al.

Summary: Experimental results demonstrate that n-butanol-diesel blend as a pilot fuel can improve the performance and emissions of natural gas (NG) dual-fuel engine. A simplified HTBMEP mechanism was constructed with 513 reactions and 117 species for numerical simulation of n-butanol-diesel-NG combustion in engine, showing reliability through extensive validation. Further numerical study indicates that increasing NG substitution rate and n-butanol blend ratio affect combustion processes and emissions.
Article Energy & Fuels

Comparative study on the combustion and emissions of dual-fuel common rail engines fueled with diesel/methanol, diesel/ethanol, and diesel/n-butanol

Zhanming Chen et al.

Summary: A comparative study on the effects of energy substitution ratio (ESR) on the combustion characteristics and performance of a dual fuel engine fueled with diesel/alcohols was conducted. Premixed combustion of diesel was influenced by alcohol enrichment, affecting ignition delay and combustion duration. Methanol was found to be most beneficial in prolonging ignition delay and shortening combustion duration. Energy substitution ratio also affected brake thermal efficiency (BTE) and NOx emissions differently for different alcohol types.
Article Energy & Fuels

Effect of n-butanol/diesel blends on performance and emissions of a heavy-duty diesel engine tested under the World Harmonised Steady-State cycle

Luis Tipanluisa et al.

Summary: This study investigates the effects of different n-butanol/diesel fuel blends on a Euro V heavy-duty diesel engine's performance and emissions. The results show that using n-butanol can improve engine performance and reduce particulate emissions in most operating conditions, while increasing CO emissions. The study also indicates that THC emissions increase with n-butanol content, while NO2 emissions decrease.
Article Energy & Fuels

Numerical research on the performance, combustion and energy flow characteristics of gasoline-powered vehicle under WLTC

Shuqian Wang et al.

Summary: The study established an integrated model to evaluate and improve the performance, combustion, and energy distribution of a vehicle with a gasoline engine under cold start conditions. Results showed the power requirements, thermal efficiency, combustion characteristics, and energy losses under different conditions, providing insights for future improvements in technologies and strategies.
Article Engineering, Environmental

A comparative study of combustion and emission characteristics of dual-fuel engine fueled with diesel/methanol and diesel-polyoxymethylene dimethyl ether blend/methanol

Hao Chen et al.

Summary: This study conducted a comparative study on the combustion characteristics and performances of a dual-fuel engine fueled with different fuels, revealing that using P50/methanol fuel can increase peak cylinder pressure, decrease first peak heat release rate, and reduce ignition delay and combustion duration. Additionally, the NOx emissions and particulate matter produced by the P50/methanol engine were lower than those produced by the diesel/methanol engine for specific MSR and engine load conditions.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Article Energy & Fuels

Performance and regulated emissions of a medium-duty diesel engine fueled with biofuels from sugarcane over the European steady cycle (ESC)

Felipe Soto et al.

Summary: The use of diesel-farnesane and sugarcane biodiesel has shown significant potential in reducing harmful emissions in Brazilian road transport. The study found that sugarcane biofuels performed better than regular diesel fuel in terms of emissions, especially in reducing particulate matter and nitrogen oxides.
Proceedings Paper Materials Science, Multidisciplinary

Energy balance and emission analysis on diesel engine using different thermal barrier coated pistons

G. Vidyasagar Reddy et al.

Summary: This study evaluates the impact of insulated heat transfer surfaces on the energy balance system of diesel engines, showing that coated pistons can reduce CO and HC emissions while increasing NOx emissions, and also decrease heat losses in the ceramic-coated engine cooling system.

MATERIALS TODAY-PROCEEDINGS (2021)

Article Thermodynamics

Energy and exergy analysis of combined ORC - ERC system for biodiesel-fed diesel engine waste heat recovery

Javad Jannatkhah et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Article Thermodynamics

Potential fuel saving in a powertrain derived from the recovery of the main energy losses for a long haul European mission

Estefania Hervas-blasco et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

Article Green & Sustainable Science & Technology

Availability analysis of using iso-octane/n-butanol blends in spark-ignition engines

Hongqing Feng et al.

RENEWABLE ENERGY (2016)

Article Thermodynamics

Feasibility analysis of a small-scale ORC energy recovery system for vehicular application

Roberto Capata et al.

ENERGY CONVERSION AND MANAGEMENT (2014)

Article Thermodynamics

Experimental investigation of thermal balance of a turbocharged SI engine operating on natural gas

A. Gharehghani et al.

APPLIED THERMAL ENGINEERING (2013)

Article Thermodynamics

Analysis of recoverable exhaust energy from a light-duty gasoline engine

Tianyou Wang et al.

APPLIED THERMAL ENGINEERING (2013)

Article Thermodynamics

Thermodynamic analysis of a variable compression ratio diesel engine running with palm oil methyl ester

Biplab K. Debnath et al.

ENERGY CONVERSION AND MANAGEMENT (2013)

Article Engineering, Mechanical

Analysis of engine temperature and energy flow in diesel engine using engine thermal management

Daebong Jung et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2013)

Review Green & Sustainable Science & Technology

Energetic and exergetic analyses of a dual-fuel diesel engine

Yoge Jeronimo Ramos da Costa et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)

Review Green & Sustainable Science & Technology

Technologies to recover exhaust heat from internal combustion engines

R. Saidur et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)

Article Computer Science, Interdisciplinary Applications

Separation of butanol from acetone-butanol-ethanol fermentation by a hybrid extraction-distillation process

Korbinian Kraemer et al.

COMPUTERS & CHEMICAL ENGINEERING (2011)

Review Thermodynamics

Progress and recent trends in homogeneous charge compression ignition (HCCI) engines

Mingfa Yao et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2009)

Article Materials Science, Coatings & Films

Experimental investigation of heat losses in a ceramic coated diesel engine

I Taymaz et al.

SURFACE & COATINGS TECHNOLOGY (2003)