Ion exchange capacity of synthetic zeolite L: a promising way for cerium recovery

The increasing rare earth elements' (REE) demand to meet the market request and the current political scenario show that it is essential to find good solutions to recover these elements from waste (both industrial and mining). Zeolites are microporous materials with high cation exchange capacity, up to now only little investigated for REE recycle. Here, we propose the use of NH4+-exchanged zeolite L for Ce recovery from a very diluted solution (0.002 M), mimicking the Ce3+ concentration of the liquors deriving from the leaching of spent catalysts. The aim of this work is twofold: (i) to investigate the exploitability of zeolite L as cation exchanger in the Ce recovery; and (ii) to determine the best working conditions. The investigated process consists of a coupled cation exchange: (1) in the first exchange the NH4+ cations - present in the zeolite porosities - are exchanged with the Ce3+ ions in the solution; and (2) in the second experiment, the Ce3+ trapped into the zeolite is recovered through a further exchange with NH4. The best working conditions for Ce3+ exchange of NH4-zeolite L are: batch system, liquid/solid ratio equal to 90 mL/g and 180 mL/g, 24 h of contact at 25 degrees C. The resulting Ce adsorption capacity (q(t)) is equal to similar to 25 mg/g and similar to 39 mg/g and the removal efficiency 100% and 77% for the two tested liquid/solid ratios, respectively. The kinetics was proved to be fast and consistent with industrial timing; no energy cost for temperature setting is required; and the acid pH (similar to 4) of the solutions does not affect the zeolite structure stability and its exchange performance. It has been demonstrated that the zeolite framework is not affected by the exchange so that the same absorbent material can be employed many times.

Automated summary

The use of NH4+-exchanged zeolite L for Ce recovery from a very diluted solution showed efficient Ce3+ exchange, with high adsorption capacity and removal efficiency under optimal working conditions.