☆ 4.7 Article

Failure analysis of the conical gaskets in ultra-high pressure pipeline sealing devices: Experiment and numerical simulation

ENGINEERING FAILURE ANALYSIS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Prediction of the durability of a gasket operating in a bolted-flange-joint subjected to cyclic bending

Przemyslaw Jaszak

Summary: The article presents experimental tests on the tightness assessment of a gasketed-flange-bolted joint with an elastomer-fiber gasket. It was found that increasing vibration cycles and bending amplitude leads to gradual leakage increase, which then stabilizes at higher amplitudes. Numerical calculations were used to determine the stress and strain of the gasket at maximum bending, and a semi-empirical model was proposed to predict the number of joint deformation cycles at which leakage remains constant.

ENGINEERING FAILURE ANALYSIS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

A numerical investigation of the sealing performance and the strength of a raised face metallic bolted flange joint

Muhsin Aljuboury et al.

Summary: This study investigated the leakage and strength development of metallic bolted flange joints using finite element analysis, validating the effectiveness of PPNC and comparing different methods. The influence of flange dimensions on stress and leakage propagation was studied, and good agreement was found between 3D and 2D FEA models, saving computational time.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2021)

添加到收藏夹

Article Engineering, Mechanical

Failure analysis of screw shaft in screw compressor

M. S. Wang et al.

Summary: The main reason for the failure of screw compressor shaft is multisource fatigue due to lack of surface quenching, and better control of surface quenching is strongly recommended to prevent similar failures.

ENGINEERING FAILURE ANALYSIS (2021)

添加到收藏夹

Article Engineering, Mechanical

Failure analysis on 304 stainless steel tube of semi water gas preheater in coal chemical plant

Jin-hui Zhai et al.

Summary: The semi water gas preheater in a coal chemical plant experienced a serious leakage failure due to fracture cracks with thick corrosion products on the outer wall. The root cause may be rapid quenching of ambient temperature leading to sulfide stress corrosion cracking. This rare failure in heat exchanger tubes caused by sulfide medium provides important reference for safety maintenance management of similar equipment.

ENGINEERING FAILURE ANALYSIS (2021)

添加到收藏夹

Article Construction & Building Technology

Experimental study on the cumulative damage constitutive model of high-performance steel Q345GJ under cyclic loading

Le Shen et al.

Summary: This study investigates the low cycle fatigue performance and cumulative damage behaviors of GJ series steel, proposing a suitable constitutive relationship and cumulative damage model for the steel, which is proven correct through comparison with test data.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2021)

添加到收藏夹

Article Engineering, Mechanical

Failure analysis of a stainless steel socket-welding flange due to improper manufacturing process and chemical composition

A. S. Pelliccione et al.

ENGINEERING FAILURE ANALYSIS (2020)

添加到收藏夹

Article Engineering, Mechanical

Failure analysis of cracked 2.25Cr-1.0Mo steel tubes of an oil refinery boiler

Azin Ahmadi et al.

ENGINEERING FAILURE ANALYSIS (2020)

添加到收藏夹

Article Mechanics

Interior microscopic cracking behavior and microstructure-fatigue based damage evaluation of case-hardened steels under variable amplitude loading

Wei Li et al.

ENGINEERING FRACTURE MECHANICS (2020)

添加到收藏夹

Article Engineering, Mechanical

Fracture failure analysis of pressure gauge bolt on fuel gas system of offshore platform

Chudong Qin et al.

ENGINEERING FAILURE ANALYSIS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Comparative study of the tensile properties of a 1.25Cr-0.5Mo steel characterized by the miniature specimen and the standard specimen

Bin Yang et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Design and analysis of the flange-bolted joint with respect to required tightness and strength

Przemyslaw Jaszak et al.

OPEN ENGINEERING (2019)

添加到收藏夹

Article Engineering, Mechanical

Applicability of Miniature Compact Tension Specimens for Fracture Toughness Evaluation of Highly Neutron Irradiated Reactor Pressure Vessel Steels

Yoosung Ha et al.

JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Evaluation of the microstructure related strength of CrMoV weldment by using the in-situ tensile test of miniature specimen

Bin Yang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Performance of a gasketed joint under bolt up and combined pressure, axial and thermal loading - FEA study

Muhammad Abid et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2018)

添加到收藏夹

Article Engineering, Mechanical

Failure analysis of a carbon steel pipeline exposed to wet hydrogen sulfide environment

Shugen Xu et al.

ENGINEERING FAILURE ANALYSIS (2017)

添加到收藏夹

Article Engineering, Mechanical

Failure investigation of 321 stainless steel pipe to flange weld joint

H. M. Shalaby

ENGINEERING FAILURE ANALYSIS (2017)

添加到收藏夹

Article Nuclear Science & Technology

Sub-size tensile specimen design for in-reactor irradiation and post-irradiation testing

Maxim N. Gussev et al.

NUCLEAR ENGINEERING AND DESIGN (2017)

添加到收藏夹

Article Nuclear Science & Technology

Miniature test techniques for life management of operating equipment

Kundan Kumar et al.

NUCLEAR ENGINEERING AND DESIGN (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Sealing behavior of twin gasketed flange joints

N. Rino Nelson et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2016)

添加到收藏夹

Article Engineering, Mechanical

Effect of creep on the failure probability of bolted flange joints

R. K. Mourya et al.

ENGINEERING FAILURE ANALYSIS (2015)

添加到收藏夹

Article Materials Science, Characterization & Testing

In Situ Evaluation of Tensile Properties of Heat-Affected Zones from Welded Steel Pipes

G. M. Castelluccio et al.

STRAIN (2012)

添加到收藏夹

Article Engineering, Multidisciplinary

Measurement of mechanical properties in a 316L stainless steel welded joint

Rafal M. Molak et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Low-temperature mechanical properties of Fe-0.06C-18Cr-10Ni-0.4Ti austenitic steel determined using ring-pull tensile tests and microhardness measurements

V. S. Neustroev et al.

JOURNAL OF NUCLEAR MATERIALS (2007)

添加到收藏夹

Article Engineering, Multidisciplinary

A study on the sealing performance of bolted flange joints with gaskets using finite element analysis

M. Murali Krishna et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2007)

添加到收藏夹

Article Engineering, Mechanical

Failure analysis of bolts on an end flange of a steam pipe

HS Chen et al.

ENGINEERING FAILURE ANALYSIS (2006)

添加到收藏夹

Article Engineering, Chemical

Modeling polymer systems using the perturbed-chain statistical associating fluid theory equation of state

J Gross et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2002)

添加到收藏夹

Article Engineering, Chemical

Perturbed-chain SAFT: An equation of state based on a perturbation theory for chain molecules

J Gross et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2001)

添加到收藏夹

Article Engineering, Mechanical

An approach to investigate pre-nucleation fatigue damage of cyclically loaded metals using Vickers microhardness tests

DY Ye et al.

INTERNATIONAL JOURNAL OF FATIGUE (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.