4.7 Article

A machine learning model to predict the pyrolytic kinetics of different types of feedstocks

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Agricultural Engineering

Torrefaction, temperature, and heating rate dependencies of pyrolysis of coffee grounds: Its performances, bio-oils, and emissions

Jiawei Fu et al.

Summary: The study demonstrates that torrefaction pretreatment can improve the efficiency of coffee grounds pyrolysis, decrease activation energy, and promote the generation of C=C. The optimal conditions are pyrolysis temperature > 600 degrees C and torrefaction temperature <= 270 degrees C. Different torrefaction temperatures have an impact on the composition ratio of bio-oils, with 200 and 250 degrees C potentially being more suitable for the torrefaction of coffee grounds.

BIORESOURCE TECHNOLOGY (2022)

Article Engineering, Environmental

Co-pyrolytic performances, mechanisms, gases, oils, and chars of textile dyeing sludge and waste shared bike tires under varying conditions

Xiaojie Tang et al.

Summary: The study compared the co-pyrolysis of textile dyeing sludge and waste shared bike tires, finding that co-pyrolysis can reduce waste emissions and recover valuable oils and chars, with TP55 showing the best performance.

CHEMICAL ENGINEERING JOURNAL (2022)

Review Environmental Sciences

Lignocellulosic biomass-based pyrolysis: A comprehensive review

K. N. Yogalakshmi et al.

Summary: The article discusses the efficient application of lignocellulosic biomass for producing valuable chemicals, focusing on the pyrolysis conversion mechanism and influential parameters. It critically analyzes the environmental and economical aspects while addressing challenges and potential solutions in implementing lignocellulosic biomass pyrolysis.

CHEMOSPHERE (2022)

Article Thermodynamics

Optimization of oil production through ex-situ catalytic pyrolysis of waste polyethylene with activated carbon

Ruming Pan et al.

Summary: This study investigated the ex-situ catalytic pyrolysis of waste polyethylene with activated carbon. The operating parameters and AC/WPE mass ratio had complex interactions on the oil and gas yields. A hybrid method of artificial neural network coupled with genetic algorithm was used to establish mathematical expressions and optimize the conditions for the highest oil yield. The experimental values were in good agreement with the predicted values, and the oil composition consisted of alkenes, naphthenes, alkanes, and aromatic hydrocarbons.

ENERGY (2022)

Article Green & Sustainable Science & Technology

Novel investigation of pyrolysis mechanisms and kinetics for functional groups in biomass matrix

Ruijia Liu et al.

Summary: The study investigated the thermal evolutions and pyrolysis kinetics of functional groups in peanut shell matrix using in-situ FTIR and TG-FTIR-MS, revealing that pyrolysis mechanisms are dominated by diffusion and order-based chemical reactions. Online monitoring of released volatiles and gases showed their quantities in the order of C=O > CO2 > aliphatic C-O-(H) > C-O-(C) in esters > aromatics > H2O > phenolic hydroxyl > aliphatic hydrocarbons > CO. This established a novel methodology for evaluating biomass pyrolysis mechanisms at the molecular level, providing valuable information for developing large-scale advanced pyrolysis techniques for sustainable ecosystems.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

Article Green & Sustainable Science & Technology

Oxy-fuel and air atmosphere combustions of Chinese medicine residues: Performances, mechanisms, flue gas emission, and ash properties

Zhiyun Chen et al.

Summary: This study investigated the combustion performance and mechanism of Chinese medicine residues in different atmospheres. The results showed that Chinese medicine residues performed better in air atmosphere than in oxy-fuel atmosphere, with the increasing oxygen fraction improving oxy-fuel combustion performance. The ash composition in oxy-fuel atmosphere mainly consisted of calcium carbonate and calcium hydroxyphosphate.

RENEWABLE ENERGY (2022)

Article Energy & Fuels

Machine learning prediction of bio-oil characteristics quantitatively relating to biomass compositions and pyrolysis conditions

Tonghuan Zhang et al.

Summary: This study utilized different biomass compositions and pyrolysis conditions to predict the characteristics of bio-oil accurately. It found that ultimate analysis is better for predicting yield, viscosity, and oxygen-carbon ratio, while chemical compositions analysis is better for predicting calorific value and hydrogen-carbon ratio. The research provides important insights for predicting the characteristics of bio-oil obtained from biomass with different compositions under various pyrolysis conditions.
Article Engineering, Environmental

Co-combustion, life-cycle circularity, and artificial intelligence-based multi-objective optimization of two plastics and textile dyeing sludge

Ziyi Ding et al.

Summary: The co-combustion of waste plastics and textile dyeing sludge can enhance circular economies, energy recovery, and pollution control. The interaction between plastics and TDS optimized combustion effects, releasing more CO2 but reducing emissions of CH4, C-H, and C-O.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Environmental Sciences

Efficiency, by-product valorization, and pollution control of co-pyrolysis of textile dyeing sludge and waste solid adsorbents: Their atmosphere, temperature, and blend ratio dependencies

Huihuang Zou et al.

Summary: This study aimed to investigate the co-pyrolytic synergistic effects of textile dyeing sludge (TDS) and waste biochar (WBC) for optimal resource utilization and environmental mitigation. Results showed a strong synergistic effect between TDS and WBC in the presence of CO2, particularly between 800 and 900 degrees C. Increasing the TDS fraction led to a significant reduction in NH3 emissions. Co-pyrolysis transformed certain harmful compounds into more stable forms and inhibited the formation of S-containing compounds.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Article Environmental Sciences

Waste Plastic Thermal Pyrolysis Analysis by a Neural Fuzzy Model Coupled with a Genetic Algorithm

Ruming Pan et al.

Summary: The process temperature, waste plastic conversion rate, and pyrolysis rate are crucial factors for industrial applications of waste plastic thermal pyrolysis.

WASTE AND BIOMASS VALORIZATION (2022)

Article Environmental Sciences

Investigating Waste Plastic Pyrolysis Kinetic Parameters by Genetic Algorithm Coupled with Thermogravimetric Analysis

Ruming Pan et al.

Summary: The study evaluates the pyrolysis kinetic parameters of pure PE, WPE, and WP using genetic algorithm and isoconversional methods coupled with thermogravimetric analysis. The reaction-order model is found to be the optimal method for describing the pyrolysis processes accurately. The optimized pyrolysis parameters by genetic algorithm are proven to be accurate and reliable for future industrial WPE and WP pyrolysis circumstances.

WASTE AND BIOMASS VALORIZATION (2021)

Article Agricultural Engineering

Machine learning prediction of pyrolytic gas yield and compositions with feature reduction methods: Effects of pyrolysis conditions and biomass characteristics

Qinghui Tang et al.

Summary: This study aimed to predict pyrolytic gas yield and compositions based on pyrolysis conditions and biomass characteristics using machine learning algorithms and feature reduction. The results showed that six features were sufficient for accurate yield prediction, while compositions only required three. The study revealed the higher relative contribution of pyrolysis conditions to yield, CO2, and H2 compared to biomass characteristics.

BIORESOURCE TECHNOLOGY (2021)

Article Agricultural Engineering

Pyrolysis of mustard oil residue: A kinetic and thermodynamic study

Rajnish Kumar Singh et al.

Summary: Thermogravimetric analysis, characterization, kinetic and thermodynamic analyses were conducted on mustard oil residue, revealing a statistically insignificant variation in activation energy and a pyrolytic temperature range of 234 to 417 degrees C. The study predicted reaction mechanisms and showed that endothermicity increased with conversion.

BIORESOURCE TECHNOLOGY (2021)

Article Engineering, Environmental

Pyrolysis dynamics of two medical plastic wastes: Drivers, behaviors, evolved gases, reaction mechanisms, and pathways

Ziyi Ding et al.

Summary: This study characterized the pyrolysis process of medical plastic wastes through TG-FTIR and Py-GC/MS analyses, finding that medical bottles showed better pyrolysis performance with lower residue content.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Thermodynamics

Prediction of three-phase product distribution and bio-oil heating value of biomass fast pyrolysis based on machine learning

Erwei Leng et al.

Summary: By establishing regression prediction models, this study shows that the random forest algorithm is suitable for predicting three-phase product distribution and bio-oil heating value, with significant impacts from factors such as pyrolysis temperature, carbon, and hydrogen content.

ENERGY (2021)

Article Chemistry, Analytical

Prediction of char production from slow pyrolysis of lignocellulosic biomass using multiple nonlinear regression and artificial neural network

Ting Yan Li et al.

Summary: This study analyzed the characteristics of char production from lignocellulosic biomass using regression and artificial neural networks. The predictive models were able to reasonably predict char yield, fixed carbon content, volatile matter content, ash content, and HHV. The artificial neural network models showed higher accuracy compared to the regression models.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2021)

Article Green & Sustainable Science & Technology

Catalytic co-pyrolysis of wet-torrefied bamboo sawdust and plastic over the zeolite H-ZSM-5: Synergistic effects and kinetics

Mahboob Alam et al.

Summary: In this study, hemicellulose was selectively removed from bamboo sawdust using wet-torrefaction technique with formic acid and NaCl as catalysts. The co-pyrolysis of torrefied bamboo sawdust and linear low-density polyethylene showed synergistic effects, with TBP1:3 (TBSD: LLDPE 1:3) exhibiting the highest synergy with the lowest Em value. The mechanism of samples with a higher fraction of torrefied bamboo sawdust during catalytic co-pyrolysis was found to be more complex.

RENEWABLE ENERGY (2021)

Article Agricultural Engineering

A comparative study of machine learning methods for bio-oil yield prediction-A genetic algorithm-based features selection

Zahid Ullah et al.

Summary: A novel genetic algorithm-based feature selection approach was used in this study to predict bio-oil yield using four different machine learning methods. The findings suggested that Random Forest model performed the best and was able to reliably predict bio-oil yield. The research provided new insights into the pyrolysis process of biomass and offered a new approach to improve bio-oil yield.

BIORESOURCE TECHNOLOGY (2021)

Article Thermodynamics

A simplified kinetic model based on a universal description for solid fuels pyrolysis: Theoretical derivation, experimental validation, and application demonstration

Tianbao Gu et al.

Summary: The establishment of a universal description for solid fuel pyrolysis reaction mechanisms and the proposal of a simplified kinetic model with only one kinetic parameter are the key contributions of this study. Experimental studies validate the new model and show its consistency with conventional models. Additionally, the new model demonstrates significant variations in activation energies with conversion degree and heating rate.

ENERGY (2021)

Article Thermodynamics

Pyrolysis of waste polyethylene in a semi-batch reactor to produce liquid fuel: Optimization of operating conditions

Ruming Pan et al.

Summary: This study investigated the interactive effects of temperature, residence time, and carrier gas flow rate on liquid fuel production through the pyrolysis of waste polyethylene (WPE). Experimental results showed a high predictive accuracy of the adaptive neural fuzzy model, and optimization using genetic algorithm maximized liquid fuel production under the optimal operating conditions.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Engineering, Environmental

Thermal and kinetic analyzing of pyrolysis and combustion of self-heating biomass particles

Liyan Liu et al.

Summary: This study investigated the pyrolysis and combustion characteristics of different biomass materials using thermogravimetric analysis. The main reaction stages of biomass were found to be between 170 to 400 degrees Celsius for pyrolysis and 180 to 530 degrees Celsius for combustion. The materials exhibited different levels of spontaneous combustion with corn straw powder being the most prone, followed by rice husk and poplar wood chip, which was correlated with their activation energy values.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Review Green & Sustainable Science & Technology

Energy recovery from municipal solid waste using pyrolysis technology: A review on current status and developments

M. M. Hasan et al.

Summary: The utilization of municipal solid waste (MSW) as a renewable energy source through pyrolysis technology is considered revolutionary and promising. The temperature, process parameters, and environmental considerations are crucial factors to be studied for maximizing biofuel production and ensuring eco-friendly operation of pyrolysis facilities.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Article Computer Science, Theory & Methods

A survey on missing data in machine learning

Tlamelo Emmanuel et al.

Summary: Machine learning techniques play a crucial role in handling missing values in data analysis. This paper summarizes the literature on missing data, focusing on machine learning approaches and key features of missing values imputation techniques. Evaluation shows that k nearest neighbor and missForest are effective in handling missing values.

JOURNAL OF BIG DATA (2021)

Review Thermodynamics

ICTAC Kinetics Committee recommendations for analysis of multi-step kinetics

Sergey Vyazovkin et al.

THERMOCHIMICA ACTA (2020)

Article Biotechnology & Applied Microbiology

Predicting algal biochar yield using eXtreme Gradient Boosting (XGB) algorithm of machine learning methods

Abhijeet Pathy et al.

ALGAL RESEARCH-BIOMASS BIOFUELS AND BIOPRODUCTS (2020)

Article Energy & Fuels

Kinetics of catalytic and non-catalytic pyrolysis of Nerium Oleander

Sindhu Subramanian et al.

Article Thermodynamics

Predicting kinetic parameters for coal devolatilization by means of Artificial Neural Networks

Jiangkuan Xing et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2019)

Review Agricultural Engineering

A review on biomass pyrolysis models: Kinetic, network and mechanistic models

Samreen Hameed et al.

BIOMASS & BIOENERGY (2019)

Article Agricultural Engineering

Kinetic study and pyrolysis characteristics of algal and lignocellulosic biomasses

Vikul Vasudev et al.

BIORESOURCE TECHNOLOGY (2019)

Article Green & Sustainable Science & Technology

Prediction of combustion activation energy of NaOH/KOH catalyzed straw pyrolytic carbon based on machine learning

Wen Jiang et al.

RENEWABLE ENERGY (2019)

Article Multidisciplinary Sciences

Missing data imputation with fuzzy feature selection for diabetes dataset

Mohamad Faiz Dzulkalnine et al.

SN APPLIED SCIENCES (2019)

Article Energy & Fuels

Prediction of product distribution and bio-oil heating value of biomass fast pyrolysis

Xing Chen et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2018)

Article Energy & Fuels

Volatile production from pyrolysis of cellulose, hemicellulose and lignin

Chenxi Zhao et al.

JOURNAL OF THE ENERGY INSTITUTE (2017)

Article Thermodynamics

Co-pyrolysis of microalgae and sewage sludge: Biocrude assessment and char yield prediction

Xin Wang et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

Article Chemistry, Applied

Catalytic effect of metal chlorides on analytical pyrolysis of alkali lignin

Wen-Liang Wang et al.

FUEL PROCESSING TECHNOLOGY (2015)

Review Multidisciplinary Sciences

Machine learning: Trends, perspectives, and prospects

M. I. Jordan et al.

SCIENCE (2015)

Article Chemistry, Analytical

A study of lignocellulosic biomass pyrolysis via the pyrolysis of cellulose, hemicellulose and lignin

Stylianos D. Stefanidis et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2014)

Article Chemistry, Applied

Influence of alkali metals on the kinetics of the thermal decomposition of biomass

A. Saddawi et al.

FUEL PROCESSING TECHNOLOGY (2012)