相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Low chlorine oil production through fast pyrolysis of mixed plastics combined with hydrothermal dechlorination pretreatment
Yihan Wang et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)
Analysis of the emission of PAH in the thermal and catalytic pyrolysis of polystyrene
Cynthia Fuentes et al.
CATALYSIS TODAY (2021)
An analysis of the plastic waste trade and management in Asia
Yangyang Liang et al.
WASTE MANAGEMENT (2021)
Plastic waste from marine environment: Demonstration of possible routes for recycling by different manufacturing technologies
F. Ronkay et al.
WASTE MANAGEMENT (2021)
Pyrolysis of Polystyrene Waste: A Review
Ibrahim M. Maafa
POLYMERS (2021)
Waste Refinery: The Valorization of Waste Plastics and End-of-Life Tires in Refinery Units. A Review
Roberto Palos et al.
ENERGY & FUELS (2021)
Pyrolysis of plastic wastes in a fountain confined conical spouted bed reactor: Determination of stable operating conditions
Santiago Orozco et al.
ENERGY CONVERSION AND MANAGEMENT (2021)
Current technologies for plastic waste treatment: A review
Fan Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Dechlorination of polyvinyl chloride by hydrothermal treatment with cupric ion
Dachao Ma et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)
Simultaneous production of aromatics-rich bio-oil and carbon nanomaterials from catalytic co-pyrolysis of biomass/plastic wastes and in-line catalytic upgrading of pyrolysis gas
Dan Xu et al.
WASTE MANAGEMENT (2021)
Managing Plastic Waste-Sorting, Recycling, Disposal, and Product Redesign
Jean-Paul Lange
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)
Interaction between feedstocks, absorbers and catalysts in the microwave pyrolysis process of waste plastics
Xiaodong Jing et al.
JOURNAL OF CLEANER PRODUCTION (2021)
United States plastics: Large flows, short lifetimes, and negligible recycling
Jinghan Di et al.
RESOURCES CONSERVATION AND RECYCLING (2021)
Life cycle environmental impacts of chemical recycling via pyrolysis of mixed plastic waste in comparison with mechanical recycling and energy recovery
Harish Jeswani et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2021)
Catalytic pyrolysis of plastic wastes in a continuous microwave assisted pyrolysis system for fuel production
Nan Zhou et al.
CHEMICAL ENGINEERING JOURNAL (2021)
Pyrolysis plastic oil production and optimisation followed by maximum possible replacement of diesel with bio-oil/methanol blends in a CRDI engine
Murugan Mariappan et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Energy recovery from municipal solid waste using pyrolysis technology: A review on current status and developments
M. M. Hasan et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)
Oceanic long-range transport of organic additives present in plastic products: an overview
Helena Andrade et al.
ENVIRONMENTAL SCIENCES EUROPE (2021)
Critical review on technological advancements for effective waste management of municipal solid waste - Updates and way forward
Priya Prajapati et al.
ENVIRONMENTAL TECHNOLOGY & INNOVATION (2021)
Ecologically Unequal Exchange of Plastic Waste? A Longitudinal Analysis of International Trade in Plastic Waste
Yikang Bai et al.
JOURNAL OF WORLD-SYSTEMS RESEARCH (2021)
Chlorine removal from the pyrolysis of urban polyolefinic waste in a semi-batch reactor
D. Torres et al.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)
Two-stage pyrolysis of polystyrene: Pyrolysis oil as a source of fuels or benzene, toluene, ethylbenzene, and xylenes
Ki-Bum Park et al.
APPLIED ENERGY (2020)
Auto-sorting commonly recovered plastics from waste household appliances and electronics using near-infrared spectroscopy
Xiaoyu Wu et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Experimental investigation to identify the type of waste plastic pyrolysis oil suitable for conversion to diesel engine fuel
V. L. Mangesh et al.
JOURNAL OF CLEANER PRODUCTION (2020)
The Chemistry and Kinetics of Polyethylene Pyrolysis: A Process to Produce Fuels and Chemicals
Dongting Zhao et al.
CHEMSUSCHEM (2020)
Waste plastic to pyrolytic oil and its utilization in CI engine: Performance analysis and combustion characteristics
R. K. Singh et al.
FUEL (2020)
Pyrolysis of plastic waste: Opportunities and challenges
Muhammad Saad Qureshi et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2020)
Reduction of polycyclic compounds and biphenyls generated by pyrolysis of industrial plastic waste by using supported metal catalysts: A case study of polyethylene terephthalate treatment
Soosan Kim et al.
JOURNAL OF HAZARDOUS MATERIALS (2020)
Structure of the global plastic waste trade network and the impact of China's import Ban
Chao Wang et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
Catalytic fast co-pyrolysis of waste greenhouse plastic films and rice husk using hierarchical micro-mesoporous composite molecular sieve
Zhaoying Li et al.
WASTE MANAGEMENT (2020)
Technologies for chemical recycling of household plastics - A technical review and TRL assessment
Martyna Solis et al.
WASTE MANAGEMENT (2020)
Polyethylene high-pressure pyrolysis: Better product distribution and process mechanism analysis
Leilei Cheng et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Pyro-Oil and Wax Recovery from Reclaimed Plastic Waste in a Continuous Auger Pyrolysis Reactor
Sultan Majed Al-Salem et al.
ENERGIES (2020)
Synergistic effects of catalytic co-pyrolysis of macroalgae with waste plastics
Shannan Xu et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)
Synergistic Effect and Chlorine-Release Behaviors During Co-pyrolysis of LLDPE, PP, and PVC
Zhilong Yuan et al.
ACS OMEGA (2020)
Thermal and catalytic decomposition of waste plastics and its co-processing with petroleum residue through pyrolysis process
Pamreishang Kasar et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Progress in waste valorization using advanced pyrolysis techniques for hydrogen and gaseous fuel production
Shin Ying Foong et al.
BIORESOURCE TECHNOLOGY (2020)
Pyrolysis of Mixed Plastic Waste: I. Kinetic Study
Ibrahim Dubdub et al.
MATERIALS (2020)
Advances and approaches for chemical recycling of plastic waste
Timmy Thiounn et al.
JOURNAL OF POLYMER SCIENCE (2020)
Challenges and opportunities for the recycling industry in developing countries: the case of Sri Lanka
A. D. N. Gunarathne et al.
JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2019)
Influence of Operating Conditions for Fast Pyrolysis and Pyrolysis Oil Production in a Conical Spouted-Bed Reactor
Hoon Chae Park et al.
CHEMICAL ENGINEERING & TECHNOLOGY (2019)
Optimization of the pyrolysis process of a plastic waste to obtain a liquid fuel using different mathematical models
L. Quesada et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Improvement of bio-crude oil properties via co-pyrolysis of pine sawdust and waste polystyrene foam
Quynh Van Nguyen et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2019)
Thermal pyrolysis of high density polyethylene (HDPE) in a novel fixed bed reactor system for the production of high value gasoline range hydrocarbons (HC)
S. M. Al-Salem
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)
Catalytic microwave-assisted pyrolysis of plastic waste over NiO and HY for gasoline-range hydrocarbons production
Kuan Ding et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Ensuring sustainability in plastics use in Africa: consumption, waste generation, and projections
Joshua O. Babayemi et al.
ENVIRONMENTAL SCIENCES EUROPE (2019)
Activator-assisted pyrolysis of polypropylene
Ki-Bum Park et al.
APPLIED ENERGY (2019)
Energy recovery from cross-linked polyethylene wastes using pyrolysis and CO2 assisted gasification
P. Singh et al.
APPLIED ENERGY (2019)
Two-step catalytic co-pyrolysis of walnut shell and LDPE for aromatic-rich oil
Dongxue Yu et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
A comprehensive optimization model for integrated solid waste management system: A case study
Koushik Paul et al.
ENVIRONMENTAL ENGINEERING RESEARCH (2019)
Novel trends in plastic waste management
Christopher Igwe Idumah et al.
SN APPLIED SCIENCES (2019)
Non-biodegradable polymeric waste pyrolysis for energy recovery
Poushpi Dwivedi et al.
HELIYON (2019)
Plastic waste to fuel via pyrolysis: A key way to solving the severe plastic waste problem in Ghana
Samuel Kofi Tulashie et al.
THERMAL SCIENCE AND ENGINEERING PROGRESS (2019)
Impact of fast and slow pyrolysis on the degradation of mixed plastic waste: Product yield analysis and their characterization
Rohit Kumar Singh et al.
JOURNAL OF THE ENERGY INSTITUTE (2019)
Catalytic Pyrolysis of Plastic Waste: Moving Toward Pyrolysis Based Biorefineries
Rashid Miandad et al.
FRONTIERS IN ENERGY RESEARCH (2019)
Pyrolysis of chlorine contaminated municipal plastic waste: In-situ upgrading of pyrolysis oils by Ni/ZSM-5, Ni/SAPO-11, red mud and Ca(OH)2 containing catalysts
B. Fekhar et al.
JOURNAL OF THE ENERGY INSTITUTE (2019)
Bio-inspired dechlorination of poly vinyl chloride
Ritu Singh et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2018)
A comparative assessment of single cylinder diesel engine characteristics with plasto-oils derived from municipal mixed plastic waste
Venkateswarlu Chintala et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Co-pyrolysis of biomass and waste plastics as a thermochemical conversion technology for high-grade biofuel production: Recent progress and future directions elsewhere worldwide
Benjamin Bernard Uzoejinwa et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Valorisation of different waste plastics by pyrolysis and in-line catalytic steam reforming for hydrogen production
Itsaso Barbarias et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Pyrolysis gases produced from individual and mixed PE, PP, PS, PVC, and PET-Part I: Production and physical properties
Stanislav Honus et al.
FUEL (2018)
Monomer recovery through advanced pyrolysis of waste high density polyethylene (HDPE)
Laura S. Diaz-Silvarrey et al.
GREEN CHEMISTRY (2018)
An overview of chemical additives present in plastics: Migration, release, fate and environmental impact during their use, disposal and recycling
John N. Hahladakis et al.
JOURNAL OF HAZARDOUS MATERIALS (2018)
Closing the loop on plastic packaging materials: What is quality and how does it affect their circularity?
John N. Hahladakis et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2018)
Pyrolysis of polystyrene waste in the presence of activated carbon in conventional and microwave heating using modified thermocouple
R. Prathiba et al.
WASTE MANAGEMENT (2018)
Heat Transfer in Vacuum Pyrolysis of Decomposing Hazardous Plastic Wastes
Jujun Ruan et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)
Stepwise pyrolysis of mixed plastics and paper for separation of oxygenated and hydrocarbon condensates
Nanta Sophonrat et al.
APPLIED ENERGY (2018)
Production of value-added liquid fuel via microwave co-pyrolysis of used frying oil and plastic waste
Wan Adibah Wan Mahari et al.
ENERGY (2018)
Benzoic acid recovery via waste poly(ethylene terephthalate) (PET) catalytic pyrolysis using sulphated zirconia catalyst
Laura S. Diaz-Silvarrey et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2018)
A novel treatment method of PVC-medical waste by near-critical methanol: Dechlorination and additives recovery
Yingying Qi et al.
WASTE MANAGEMENT (2018)
An Overview of Recent Developments in Biomass Pyrolysis Technologies
M. N. Uddin et al.
ENERGIES (2018)
Energy recovery from pyrolysis of plastic waste: Study on non-recycled plastics (NRP) data as the real measure of plastic waste
Shafferina Dayana Anuar Sharuddin et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Towards the effective plastic waste management in Bangladesh: a review
Monjur Mourshed et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2017)
Combustion, performance and emission analysis of a DI diesel engine using plastic pyrolysis oil
Ioannis Kalargaris et al.
FUEL PROCESSING TECHNOLOGY (2017)
Effect of plastic waste types on pyrolysis liquid oil
R. Miandad et al.
INTERNATIONAL BIODETERIORATION & BIODEGRADATION (2017)
A review on thermal and catalytic pyrolysis of plastic solid waste (PSW)
S. M. Al-Salem et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2017)
Thermochemical routes for the valorization of waste polyolefinic plastics to produce fuels and chemicals. A review
Gartzen Lopez et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Performance indicators for a circular economy: A case study on post-industrial plastic waste
Sofie Huysman et al.
RESOURCES CONSERVATION AND RECYCLING (2017)
Production, use, and fate of all plastics ever made
Roland Geyer et al.
SCIENCE ADVANCES (2017)
Municipal Plastic Waste Composition Study at Transfer Station of Bangkok and Possibility of its Energy Recovery by Pyrolysis
Chinnathan Areeprasert et al.
3RD INTERNATIONAL CONFERENCE ON ENERGY AND ENVIRONMENT RESEARCH, ICEER 2016 (2017)
Developing waste biorefinery in Makkah: A way forward to convert urban waste into renewable energy
A. S. Nizami et al.
APPLIED ENERGY (2017)
Human lead (Pb) exposure via dust from different land use settings of Pakistan: A case study from two urban mountainous cities
Syed Ali Musstjab Akber Shah Eqani et al.
CHEMOSPHERE (2016)
A review on pyrolysis of plastic wastes
Shafferina Dayana Anuar Sharuddin et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Combustion analysis of pyrolysis end of life plastic fuel blended with ultra low sulfur diesel
Preetham Reddy Churkunti et al.
FUEL PROCESSING TECHNOLOGY (2016)
Pyrolysis and combustion of municipal solid wastes: Evaluation of synergistic effects using TGA-MS
Sanjana D. Gunasee et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2016)
Chemical recycling of brominated flame retarded plastics from e-waste for clean fuels production: A review
Chuan Ma et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Plastics to fuel: a review
Bidhya Kunwar et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Assessment of environmental and economic performance of Waste-to-Energy facilities in Thai cities
S. N. M. Menikpura et al.
RENEWABLE ENERGY (2016)
Product distribution from solar pyrolysis of agricultural and forestry biomass residues
Rui Li et al.
RENEWABLE ENERGY (2016)
TEMPERATURE AND TIME INFLUENCE ON THE WASTE PLASTICS PYROLYSIS IN THE FIXED BED REACTOR
Sasa V. Papuga et al.
THERMAL SCIENCE (2016)
Recycling of plastic waste: Presence of phthalates in plastics from households and industry
K. Pivnenko et al.
WASTE MANAGEMENT (2016)
Washing pretreatment with light bio-oil and its effect on pyrolysis products of bio-oil and biochar
Shuping Zhang et al.
RSC ADVANCES (2016)
Catalytic Hydrodeoxygenation of Bio-oil Model Compounds over Pt/HY Catalyst
Heejin Lee et al.
SCIENTIFIC REPORTS (2016)
Wax: A benign hydrogen-storage material that rapidly releases H2-rich gases through microwave-assisted catalytic decomposition
S. Gonzalez-Cortes et al.
SCIENTIFIC REPORTS (2016)
The geological cycle of plastics and their use as a stratigraphic indicator of the Anthropocene
Jan Zalasiewicz et al.
ANTHROPOCENE (2016)
Catalytic pyrolysis of black-liquor lignin by co-feeding with different plastics in a fluidized bed reactor
Huiyan Zhang et al.
BIORESOURCE TECHNOLOGY (2015)
Experimental investigation of performance, emission and combustion characteristics of waste plastic pyrolysis oil blended with diethyl ether used as fuel for diesel engine
J. Devaraj et al.
ENERGY (2015)
Process simulation of biomass gasification in a bubbling fluidized bed reactor
S. M. Beheshti et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
A detailed study of combustion characteristics of a DI diesel engine using waste plastic oil and its blends
Viswanath K. Kaimal et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Fast pyrolysis of biomass and waste plastic in a fluidized bed reactor
Yuan Xue et al.
FUEL (2015)
Influence of process conditions on syngas production from the thermal processing of waste high density polyethylene
Juniza Md Saad et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2015)
Current state and future prospects of plastic waste as source of fuel: A review
S. L. Wong et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)
Plastic waste inputs from land into the ocean
Jenna R. Jambeck et al.
SCIENCE (2015)
Styrene recovery from polystyrene by flash pyrolysis in a conical spouted bed reactor
Maite Artetxe et al.
WASTE MANAGEMENT (2015)
Polycyclic aromatic hydrocarbons (PAH) formation from the pyrolysis of different municipal solid waste fractions
Hui Zhou et al.
WASTE MANAGEMENT (2015)
Characterisation of chemical composition and energy content of green waste and municipal solid waste from Greater Brisbane, Australia
San Shwe Hla et al.
WASTE MANAGEMENT (2015)
Flotation separation of waste plastics for recycling-A review
Chong-qing Wang et al.
WASTE MANAGEMENT (2015)
Pyrolysis technologies for municipal solid waste: A review (Reprinted from Waste Management, vol 34, pg 2466-2486, 2014)
Dezhen Chen et al.
WASTE MANAGEMENT (2015)
A review of technologies and performances of thermal treatment systems for energy recovery from waste
Lidia Lombardi et al.
WASTE MANAGEMENT (2015)
Pyrolysis Study of Polypropylene and Polyethylene Into Premium Oil Products
Imtiaz Ahmad et al.
INTERNATIONAL JOURNAL OF GREEN ENERGY (2015)
Engine Performance and Emission Characteristics of Plastic Oil Produced from Waste Polyethylene and Its Blends with Diesel Fuel
Ceyla Gungor et al.
INTERNATIONAL JOURNAL OF GREEN ENERGY (2015)
Plasticwaste management and disposal techniques - Indian scenario
Rohit Kumar Singh et al.
INTERNATIONAL JOURNAL OF PLASTICS TECHNOLOGY (2015)
Municipal solid waste collection optimization in Singapore
Weijian Xue et al.
APPLIED GEOGRAPHY (2015)
Production of green aromatics and olefins by catalytic cracking of oxygenate compounds derived from biomass pyrolysis: A review
Pouya Sirous Rezaei et al.
APPLIED CATALYSIS A-GENERAL (2014)
A review on co-pyrolysis of biomass: An optional technique to obtain a high-grade pyrolysis oil
Faisal Abnisa et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Waste incineration and adverse birth and neonatal outcomes: a systematic review
Danielle C. Ashworth et al.
ENVIRONMENT INTERNATIONAL (2014)
Efficient disposal of waste polyolefins through microwave assisted pyrolysis
Andrea Undri et al.
FUEL (2014)
Production, characterization and fuel properties of alternative diesel fuel from pyrolysis of waste plastic grocery bags
Brajendra K. Sharma et al.
FUEL PROCESSING TECHNOLOGY (2014)
Evaluation of pyrolysis process parameters on polypropylene degradation products
Mehrdad Seifali Abbas-Abadi et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2014)
Characteristics and the recovery potential of plastic wastes obtained from landfill mining
Chuanbin Zhou et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Thermo-catalytic pyrolysis of polystyrene in the presence of zinc bulk catalysts
Adnan et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2014)
Waste to energy status in India: A short review
Khanjan Ajaybhai Kalyani et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)
Pyrolysis technologies for municipal solid waste: A review
Dezhen Chen et al.
WASTE MANAGEMENT (2014)
Boiling treatment of ABS and PS plastics for flotation separation
Chong-qing Wang et al.
WASTE MANAGEMENT (2014)
Microplastics in freshwater ecosystems: what we know and what we need to know
Martin Wagner et al.
Environmental Sciences Europe (2014)
Comparision of real waste (MSW and MPW) pyrolysis in batch reactor over different catalysts. Part I: Product yields, gas and pyrolysis oil properties
Funda Ates et al.
BIORESOURCE TECHNOLOGY (2013)
Air gasification of mixed plastic wastes using calcined dolomite and activated carbon in a two-stage gasifier to reduce tar
Min-Hwan Cho et al.
ENERGY (2013)
Performance and emission analysis of blends of waste plastic oil obtained by catalytic pyrolysis of waste HDPE with diesel in a CI engine
Sachin Kumar et al.
ENERGY CONVERSION AND MANAGEMENT (2013)
Evaluation of pyrolysis product of virgin high density polyethylene degradation using different process parameters in a stirred reactor
Mehrdad Seifali Abbas-Abadi et al.
FUEL PROCESSING TECHNOLOGY (2013)
Demonstration of the waste tire pyrolysis process on pilot scale in a continuous auger reactor
Juan Daniel Martinez et al.
JOURNAL OF HAZARDOUS MATERIALS (2013)
Classify plastic waste as hazardous
Chelsea M. Rochman et al.
NATURE (2013)
Catalytic efficiency of some novel nanostructured heterogeneous solid catalysts in pyrolysis of HDPE
Imtiaz Ahmad et al.
POLYMER DEGRADATION AND STABILITY (2013)
Predicting Pyrolysis Products of PE, PP, and PET Using NRTL Activity Coefficient Model
Seyed Mousa Fakhr Hoseini et al.
JOURNAL OF CHEMISTRY (2013)
Review of fast pyrolysis of biomass and product upgrading
A. V. Bridgwater
BIOMASS & BIOENERGY (2012)
A Review on Waste to Energy Processes Using Microwave Pyrolysis
Su Shiung Lam et al.
ENERGIES (2012)
Biofuels Production through Biomass Pyrolysis-A Technological Review
Mohammad I. Jahirul et al.
ENERGIES (2012)
Microplastic in Terrestrial Ecosystems and the Soil?
Matthias C. Rillig
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2012)
The conversion of waste polystyrene into useful hydrocarbons by microwave-metal interaction pyrolysis
Zahid Hussain et al.
FUEL PROCESSING TECHNOLOGY (2012)
Study on pyrolysis characteristics of refuse plastic fuel using lab-scale tube furnace and thermogravimetric analysis reactor
Sang Shin Park et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2012)
Characterization of the waxes obtained by the pyrolysis of polyolefin plastics in a conical spouted bed reactor
M. Arabiourrutia et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2012)
An Overview of Solid Waste Management and Plastic Recycling in Qatar
M. Al-Maaded et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2012)
Experimental investigation of the quality characteristics of agricultural plastic wastes regarding their recycling and energy recovery potential
D. Briassoulis et al.
WASTE MANAGEMENT (2012)
Pyrolysis of plastic packaging waste: A comparison of plastic residuals from material recovery facilities with simulated plastic waste
A. Adrados et al.
WASTE MANAGEMENT (2012)
RECOVERY OF HYDROCARBON LIQUID FROM WASTE HIGH DENSITY POLYETHYLENE BY THERMAL PYROLYSIS
Sachin Kumar et al.
BRAZILIAN JOURNAL OF CHEMICAL ENGINEERING (2011)
Influence of time and temperature on pyrolysis of plastic wastes in a semi-batch reactor
A. Lopez-Urionabarrenechea et al.
CHEMICAL ENGINEERING JOURNAL (2011)
Environmental Impact of Pyrolysis of Mixed WEEE Plastics Part 1: Experimental Pyrolysis Data
Sue M. Alston et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2011)
Production of pyrolytic oils by catalytic pyrolysis of Malaysian refuse-derived fuels in continuously stirred batch reactor
N. Miskolczi et al.
FUEL PROCESSING TECHNOLOGY (2011)
Dechlorination of fuels in pyrolysis of PVC containing plastic wastes
A. Lopez-Urionabarrenechea et al.
FUEL PROCESSING TECHNOLOGY (2011)
Product Yields and Compositions in the Continuous Pyrolysis of High-Density Polyethylene in a Conical Spouted Bed Reactor
Gorka Elordi et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2011)
Deactivation and regeneration of ZSM-5 zeolite in catalytic pyrolysis of plastic wastes
A. Lopez-Urionabarrenechea et al.
WASTE MANAGEMENT (2011)
Thermal degradation behaviors of polyethylene and polypropylene. Part I: Pyrolysis kinetics and mechanisms
A. Aboulkas et al.
ENERGY CONVERSION AND MANAGEMENT (2010)
Pyrolysis of a fraction of waste polypropylene and polyethylene for the recovery of BTX aromatics using a fluidized bed reactor
Su-Hwa Jung et al.
FUEL PROCESSING TECHNOLOGY (2010)
Waste-to-energy: A way from renewable energy sources to sustainable development
Richa Kothari et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)
Thermolysis of waste plastics to liquid fuel A suitable method for plastic waste management and manufacture of value added products-A world prospective
Achyut K. Panda et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)
Sustainable construction: construction and demolition waste reconsidered
Mercedes del Rio Merino et al.
WASTE MANAGEMENT & RESEARCH (2010)
Thermal and catalytic pyrolysis of polyethylene over HZSM5 and HUSY zeolites in a batch reactor under dynamic conditions
A. Marcilla et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2009)
Performance, emission and combustion characteristics of a DI diesel engine using waste plastic oil
M. Mani et al.
APPLIED THERMAL ENGINEERING (2009)
Wood/plastic copyrolysis in an auger reactor: Chemical and physical analysis of the products
Priyanka Bhattacharya et al.
FUEL (2009)
Fuels by pyrolysis of waste plastics from agricultural and packaging sectors in a pilot scale reactor
N. Miskolczi et al.
FUEL PROCESSING TECHNOLOGY (2009)
Composition of products from the pyrolysis of polyethylene and polystyrene in a closed batch reactor: Effects of temperature and residence time
Jude A. Onwudili et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2009)
Plastics recycling: challenges and opportunities
Jefferson Hopewell et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY B-BIOLOGICAL SCIENCES (2009)
Plastics, the environment and human health: current consensus and future trends
Richard C. Thompson et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY B-BIOLOGICAL SCIENCES (2009)
Accumulation and fragmentation of plastic debris in global environments
David K. A. Barnes et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY B-BIOLOGICAL SCIENCES (2009)
Chemical composition of material fractions in Danish household waste
Christian Riber et al.
WASTE MANAGEMENT (2009)
Sustainable recycling of municipal solid waste in developing countries
Alexis M. Troschinetz et al.
WASTE MANAGEMENT (2009)
The effect of lignin and inorganic species in biomass on pyrolysis oil yields, quality and stability
R. Fahmi et al.
FUEL (2008)
Economics of willow pyrolysis after phytoextraction
Theo Thewys et al.
INTERNATIONAL JOURNAL OF PHYTOREMEDIATION (2008)
Biodiesel as an alternative motor fuel: Production and policies in the European Union
Kahraman Bozbas
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2008)
Catalytic pyrolysis of high density polyethylene in a conical spouted bed reactor
G. Elordi et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2007)
Feedstock recycling of polyethylene in a two-step thermo-catalytic reaction system
J. Aguado et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2007)
A review of municipal solid waste composition in the United Kingdom
Stephen J. Burnley
WASTE MANAGEMENT (2007)
Development of new lubricating grease formulations using recycled LDPE as rheology modifier additive
J. E. Martin-Alfonso et al.
EUROPEAN POLYMER JOURNAL (2007)
Fast pyrolysis of halogenated plastics recovered from waste computers
William J. Hall et al.
ENERGY & FUELS (2006)
Use of mobile fast pyrolysis plants to densify biomass and reduce biomass handling costs - A preliminary assessment
PC Badger et al.
BIOMASS & BIOENERGY (2006)
Thermal degradation of polyethylene and polystyrene from the packaging industry over different catalysts into fuel-like feed stocks
N Miskolczi et al.
POLYMER DEGRADATION AND STABILITY (2006)
Defluidization modelling of pyrolysis of plastics in a conical spouted bed reactor
R Aguado et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2005)
Pyrolysis studies of PP/PE/PS/PVC/HIPS-Br plastics mixed with PET and dehalogenation (Br, Cl) of the liquid products
T Bhaskar et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2004)
Pyrolysis of municipal plastic wastes for recovery of gasoline-range hydrocarbons
A Demirbas
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2004)
Thermal and thermo-catalytic degradation of high-density polyethylene waste
N Miskolczi et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2004)
Thermal degradation of municipal plastic waste for production of fuel-like hydrocarbons
N Miskolczi et al.
POLYMER DEGRADATION AND STABILITY (2004)
Thermogravimetry as a tool to classify waste components to be used for energy generation
JM Heikkinen et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2004)
Fast pyrolysis of forestry residue. 3. Storage stability of liquid fuel
A Oasmaa et al.
ENERGY & FUELS (2003)
Recent innovations in barrier technologies for plastic packaging - a review
J Lange et al.
PACKAGING TECHNOLOGY AND SCIENCE (2003)
Chemical recycling of pop bottles: The synthesis of dibenzyl terephthalate from the plastic polyethylene terephthalate
CJ Donahue et al.
JOURNAL OF CHEMICAL EDUCATION (2003)
Wax formation in the pyrolysis of polyolefins in a conical spouted bed reactor
R Aguado et al.
ENERGY & FUELS (2002)
Fluidized bed pyrolysis of a recycled polyethylene
ML Mastellone et al.
POLYMER DEGRADATION AND STABILITY (2002)
Comparison of plastic types for catalytic degradation of waste plastics into liquid product with spent FCC catalyst
KH Lee et al.
POLYMER DEGRADATION AND STABILITY (2002)
Pyrolysis of high-density polyethylene in a fluidised bed reactor. Influence of the temperature and residence time
FJ Mastral et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2002)
Catalytic pyrolysis of polyethylene
R Bagri et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2002)
PAH emission from the incineration of three plastic wastes
CT Li et al.
ENVIRONMENT INTERNATIONAL (2001)
Thermal and catalytic decomposition of mixed plastics
C Vasile et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2001)
Vacuum pyrolysis of commingled plastics containing PVC II. Product analysis
R Miranda et al.
POLYMER DEGRADATION AND STABILITY (2001)
Pyrolysis kinetics of waste PVC pipe
S Kim
WASTE MANAGEMENT (2001)
The production of gasoline range hydrocarbons from Alcell (R) lignin using HZSM-5 catalyst
RW Thring et al.
FUEL PROCESSING TECHNOLOGY (2000)
Pyrolysis of polystyrene waste in a fluidized-bed reactor to obtain styrene monomer and gasoline fraction
YR Liu et al.
FUEL PROCESSING TECHNOLOGY (2000)
分享论文
