4.5 Article

Prediction of the Total Base Number (TBN) of Engine Oil by Means of FTIR Spectroscopy

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Chemical

Engine Oils in the Field: A Comprehensive Tribological Assessment of Engine Oil Degradation in a Passenger Car

Adam Agocs et al.

Summary: This study investigates the deterioration of friction and wear properties of engine oil during its service life and the differences in tribofilms formed under different oil conditions. The test results show a 9% increase in friction and over 420% increase in wear during the 20,000 km service life of the used oil samples. The composition of the tribofilms is found to be correlated with the degradation of additive in the used engine oils. Specifically, the degradation of zinc dialkyl dithiophosphate (ZDDP) antiwear additive leads to significant changes in the tribofilms. The findings provide insights into the mechanism of tribofilm formation under real operating conditions.

TRIBOLOGY LETTERS (2022)

Article Engineering, Mechanical

Motor oil degradation during urban cycle road tests

Lei Wei et al.

Summary: This study investigates the variations in oil properties after servicing at 5,000 km for civilian vehicles in China operating in urban traffic conditions. The results showed that the total acid number (TAN) of oils increased with the operation mileage, while the total base number (TBN) decreased after road tests. The kinematic viscosity (KV) decreased initially, stabilized, and then increased later, with all values of oxidation onset temperature (OOT) higher than 210 degrees C.

FRICTION (2021)

Article Automation & Control Systems

Applying chemometric procedures for correlation the FTIR spectroscopy with the new thermometric evaluation of Total Acid Number and Total Basic Number in engine oils

Vicente Macian et al.

Summary: Currently, the main trend in the industry is to use spectroscopic techniques for evaluating the condition of used engine oils. Chemometric studies are required to establish the relationship between spectra and attributes, specifically focusing on parameters like Total Acid Number (TAN) and Total Basic Number (TBN). This study demonstrates the applicability of chemometric procedures in combination with thermometric titration for accurately determining TAN and TBN values of used engine oils.

CHEMOMETRICS AND INTELLIGENT LABORATORY SYSTEMS (2021)

Article Chemistry, Multidisciplinary

Application of FTIR-ATR Spectrometry in Conjunction with Multivariate Regression Methods for Viscosity Prediction of Worn-Out Motor Oils

Marie Sejkorova et al.

Summary: Viscosity is a key factor in lubrication quality and is closely monitored by oil and engine manufacturers. The FTIR-PLS model offers a faster and more efficient method for determining viscosity of worn-out motor oils compared to standardized methods, with high accuracy and precision.

APPLIED SCIENCES-BASEL (2021)

Article Transportation Science & Technology

Acid Neutralization Rates-Why Total Base Number Doesn't Tell the Whole Story: Understanding the Neutralization of Organic Acid in Engine Oils

David Growney et al.

Summary: The acidification of lubricating oils during engine operation and subsequent additive neutralization pose significant challenges for manufacturers and end-users. Traditional methods of measuring TBN and TAN oversimplify the oil's condition without considering the type and corrosiveness of acids, the effectiveness of bases, and how these factors interact. Understanding and controlling the effects of organic acids, especially those formed from biofuels like methanol and ethanol, is becoming increasingly important in lubricant research.

SAE INTERNATIONAL JOURNAL OF FUELS AND LUBRICANTS (2021)

Article Engineering, Mechanical

Rapid Fleet Condition Analysis through Correlating Basic Vehicle Tracking Data with Engine Oil FT-IR Spectra

Andras Lajos Nagy et al.

Summary: Engine oil condition and tribological performance are closely related, thus oil condition monitoring is necessary. This study provides a rapid analysis method for large vehicle fleets or sample sizes, offering a cost-efficient and intuitive way to detect oil differences as an alternative to commonly used methods.

LUBRICANTS (2021)

Article Engineering, Mechanical

UV-Visible Spectrophotometer for Distinguishing Oxidation Time of Engine Oil

Torrey Holland et al.

Summary: The study involved inspecting samples of gasoline engine oil exposed to different oxidation times using a UV-Visible spectrophotometer to select the best wavelengths and wavelength ranges for distinguishing oxidation times. The analysis determined the optimal wavelength or range for predicting oxidation time through linear regression.

LUBRICANTS (2021)

Article Engineering, Mechanical

Comparing oil condition in diesel and gasoline engines

Adam Agocs et al.

INDUSTRIAL LUBRICATION AND TRIBOLOGY (2020)

Article Green & Sustainable Science & Technology

Comparative assessment of engine performance and emissions fueled with three different biodiesel generations

Sara Tayari et al.

RENEWABLE ENERGY (2020)

Proceedings Paper Materials Science, Multidisciplinary

Characterization of waste engine oil (WEO) pyrolytic oil and diesel blended oil: Fuel properties and compositional analysis

Nivedita Patel et al.

MATERIALS TODAY-PROCEEDINGS (2020)

Article Chemistry, Analytical

Predicting cetane number in diesel fuels using FTIR spectroscopy and PLS regression

Issam Barra et al.

VIBRATIONAL SPECTROSCOPY (2020)

Article Chemistry, Analytical

FTIR analysis and monitoring of synthetic aviation engine oils

Mike J. Adams et al.

TALANTA (2007)