4.5 Article

Reduction of Starting Current in Large Induction Motors

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Energy & Fuels

Influence of Equivalent Circuit Resistances on Operating Parameters on Three-Phase Induction Motors with Powers up to 50 kW

Marcel Torrent et al.

Summary: This study quantifies the influence of equivalent circuit resistances on the performance of induction motors, focusing on efficiency and losses. It evaluates the impact of different resistances on motor operation by examining applicable constructive modifications.

ENERGIES (2021)

Article Energy & Fuels

Experimental Comparison of Preferential vs. Common Delta Connections for the Star-Delta Starting of Induction Motors

Jose Augusto Itajiba et al.

Summary: The paper explores two possible forms of delta connection for stator winding of an induction motor, each with different amplitudes of switching current. The form with a relatively small amplitude is referred to as preferential, while the one with a higher amplitude is called common. This distinction is important for the performance of the motor during star-delta starting.

ENERGIES (2021)

Article Energy & Fuels

Stray Flux Analysis for the Detection and Severity Categorization of Rotor Failures in Induction Machines Driven by Soft-Starters

Vicente Biot-Monterde et al.

Summary: The study aims to confirm the reliability of the Stray Flux Analysis technique in soft-started induction motors, with results confirming its potential for detecting electromechanical failures in soft-started SCIMs.

ENERGIES (2021)

Article Energy & Fuels

A Buffer Power Source Based on a Supercapacitor for Starting an Induction Motor under Load

Ruslan Saifulin et al.

Summary: In this paper, a model of a three-phase frequency-controlled induction electric drive was developed and it was proposed to use supercapacitors as a buffer power source to compensate for voltage drop in the power system during start-up operation under load. Simulation modeling showed that this additional source of electric energy principle allows starting induction electric drives in areas remote from industrial networks without significantly affecting their static and dynamic characteristics.

ENERGIES (2021)

Article Automation & Control Systems

Fast Circuit-Field Coupling Analysis for Skewed Induction Motor

Fanqing Meng et al.

Summary: This article proposes a fast circuit-field coupling method for the analysis of skewed induction motors. By coupling the equivalent circuit and magnetic field analysis, the method calculates the magnetic field distribution and performance indicators, demonstrating fast computation speed and high accuracy.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)

Article Engineering, Electrical & Electronic

Inrush Current Measurement for Transient Space Characterization and Fault Detection

Erik K. Saathoff et al.

Summary: Training the load identification algorithm for a power-system monitor begins with observing the loads and using a phase-controlled switch to account for the effects of source and line impedance on load transients. The system presented in the article can provide training data for machine learning algorithms and be used as the foundation for a smart switch in grid applications for automatic demand response control.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2021)

Article Energy & Fuels

A Dynamic Model for Saturated Induction Machines With Closed Rotor Slots and Deep Bars

Eemeli Molsa et al.

IEEE TRANSACTIONS ON ENERGY CONVERSION (2020)

Article Engineering, Multidisciplinary

Soft Start and Voltage Control of Induction Motors Using Floating Capacitor H-Bridge Converters

Siyu Leng et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2016)

Article Automation & Control Systems

Ecoanalysis of Variable-Speed Drives for Flow Regulation in Pumping Systems

Fernando J. T. E. Ferreira et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2011)

Article Engineering, Multidisciplinary

A Multisliced Finite-Element Model for Induction Machines Incorporating Interbar Current

David G. Dorrell et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2009)

Article Engineering, Electrical & Electronic

A Current Distortion Compensation Scheme for Four-Switch Inverters

Jaehong Kim et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2009)

Article Engineering, Industrial

Power system studies for cement plants

Thomas P. Smith

IEEE INDUSTRY APPLICATIONS MAGAZINE (2007)

Article Energy & Fuels

Simulation studies of the transients of squirrel-cage induction motors

Masahiro Ikeda et al.

IEEE TRANSACTIONS ON ENERGY CONVERSION (2007)

Article Engineering, Electrical & Electronic

Analysis and effects of inter-bar current and skew on a long skewed-rotor induction motor for pump applications

David G. Dorrell et al.

IEEE TRANSACTIONS ON MAGNETICS (2007)

Article Engineering, Multidisciplinary

Starting high-inertia loads

RF McElveen et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2001)