相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Energy-efficient heating control for smart buildings with deep reinforcement learning
Anchal Gupta et al.
JOURNAL OF BUILDING ENGINEERING (2021)
Effect of silane treated fly ash on physico-mechanical, morphological, and thermal properties of recycled poly(vinyl chloride) composites
Omdeo Kishorrao Gohatre et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2021)
Effects of systematically varied thiourethane-functionalized filler concentration on polymerization behavior and relevant clinical properties of dental composites
S. H. Lewis et al.
MATERIALS & DESIGN (2021)
Synthesis and characterization of flame-retardant rigid polyurethane foams derived from gutter oil biodiesel
Guangxu Bo et al.
EUROPEAN POLYMER JOURNAL (2021)
Natural cork agglomerate enabled mechanically robust rigid polyurethane foams with outstanding viscoelastic damping properties
Sung Jun Park et al.
POLYMER (2021)
Fly Ash as an Eco-Friendly Filler for Rigid Polyurethane Foams Modification
Monika Kuznia et al.
MATERIALS (2021)
Enhancing the flame retardancy for castor oil-based rigid polyurethane foams via silica aerogel
Guangxu Bo et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2021)
Reusing of fly ash from coal combustion in technology of polyurethane materials
Monika Kuznia
PRZEMYSL CHEMICZNY (2021)
Natural fillers as reinforcement for closed-molded polyurethane foam plaques: Mechanical, morphological, and thermal properties
Syed Muhammad Husainie et al.
MATERIALS TODAY COMMUNICATIONS (2021)
Rigid polyurethane foams modified with thermoset polyester-glass fiber composite waste
Mateusz Barczewski et al.
POLYMER TESTING (2020)
Effect of degree of silanization of luffa on the properties of luffa-epoxy composites
Sangeetha Dharmalingam et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)
Enhanced interfacial and mechanical performance of styrene-butadiene rubber/silica composites compatibilized by soybean oil derived silanized plasticization
Adeel Ahmad Hassan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Nutmeg filler as a natural compound for the production of polyurethane composite foams with antibacterial and anti-aging properties
Sylwia Czlonka et al.
POLYMER TESTING (2020)
Effect of walnut shells and silanized walnut shells on the mechanical and thermal properties of rigid polyurethane foams
Sylwia Czlonka et al.
POLYMER TESTING (2020)
Synergistic effect of expandable graphite and phenylphosphonic-aniline salt on flame retardancy of rigid polyurethane foam
Pablo Acuna et al.
POLYMER DEGRADATION AND STABILITY (2020)
The effect of two-step surface treatment by hydrogen peroxide and silanization of flax/cotton fabrics on epoxy-based laminates thermomechanical properties and structure
Mateusz Barczewski et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Synthesis of biomass-derived bottom waste ash based rigid biopolyurethane composite foams: Rheological behaviour, structure and performance characteristics
Agne Kairyte et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Composites of rigid polyurethane foams and silica powder filler enhanced with ionic liquid
Sylwia Czlonka et al.
POLYMER TESTING (2019)
Fluidized bed combustion fly ash as filler in composite polyurethane materials
Monika Kuznia et al.
WASTE MANAGEMENT (2019)
Quickly self-extinguishing flame retardant behavior of rigid polyurethane foams linked with phosphaphenanthrene groups
Lijun Qian et al.
COMPOSITES PART B-ENGINEERING (2019)
Biodegradable, Flame-Retardant, and Bio-Based Rigid Polyurethane/Polyisocyanurate Foams for Thermal Insulation Application
Marcin Borowicz et al.
POLYMERS (2019)
Silanized cereal straw as a novel, functional filler of natural rubber biocomposites
Marcin Maslowski et al.
CELLULOSE (2019)
Surface functionalization of boron nitride platelets via a catalytic oxidation/silanization process and thermomechanical properties of boron nitride epoxy composites
Jae-Ha Lee et al.
COMPOSITES PART B-ENGINEERING (2019)
Flame retardance of leather with flame retardant added in retanning process
Baorong Duan et al.
RESULTS IN PHYSICS (2019)
Silanization of multi-walled carbon nanotubes and the study of its effects on the properties of polyurethane rigid foam nanocomposites
Alireza Yaghoubi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Thermal, Mechanical, and Morphological Properties of Rigid Crude Glycerol-Based Polyurethane Foams Reinforced With Nanoclay and Microcrystalline Cellulose
Xiaoge Qi et al.
EUROPEAN JOURNAL OF LIPID SCIENCE AND TECHNOLOGY (2018)
Inhibiting efflorescence formation on fly ash-based geopolymer via silane surface modification
Xiao Xue et al.
CEMENT & CONCRETE COMPOSITES (2018)
Keratin feathers as a filler for rigid polyurethane foams on the basis of soybean oil polyol
Sylwia Czlonka et al.
POLYMER TESTING (2018)
Coated vs. naked red phosphorus: A comparative study on their fire retardancy and smoke suppression for rigid polyurethane foams
Zhi-Jie Cao et al.
POLYMER DEGRADATION AND STABILITY (2017)
Study on chemical composition of fly ash from fluidized-bed and conventional coal combustion
Monika Kuznia et al.
PRZEMYSL CHEMICZNY (2017)
Influence of filler surface characteristics on morphological, physical, acoustic properties of polyurethane composite foams filled with inorganic fillers
Giwook Sung et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
An Investigation into the Influence of Filler Silanization Conditions on Mechanical and Thermal Parameters of Epoxy Resin-Fly Ash Composites
Jolanta Sroka et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2016)
Effect of silanization of hydroxyapatite fillers on physical and mechanical properties of a bis-GMA based resin composite
Christie Ying Kei Lung et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Continuous flame-retardant actions of two phosphate esters with expandable graphite in rigid polyurethane foams
Wang Xi et al.
POLYMER DEGRADATION AND STABILITY (2016)
Effects of different surface modification and contents on municipal solid waste incineration fly ash/epoxy composites
C. K. Goh et al.
WASTE MANAGEMENT (2016)
Dispersion and reinforcing effect of carrot nanofibers on biopolyurethane foams
Xiaojian Zhou et al.
MATERIALS & DESIGN (2016)
Effect of surface silanization of carbon fiber on mechanical properties of carbon fiber reinforced polyurethane composites
Shuai Jiang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
Silane surface modification for improved bioadhesion of esophageal stents
Mert Karakoy et al.
APPLIED SURFACE SCIENCE (2014)
Towards optimization of the silanization process of hydroxyapatite for its use in bone cement formulations
Olga G. Cisneros-Pineda et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Thermal degradation characteristics of rigid polyurethane foam and the volatile products analysis with TG-FTIR-MS
Lingling Jiao et al.
POLYMER DEGRADATION AND STABILITY (2013)
Thermal and mechanical behaviour of flexible polyurethane foams modified with graphite and phosphorous fillers
Anna Wolska et al.
JOURNAL OF MATERIALS SCIENCE (2012)
Rigid polyurethane foams from a soybean oil-based Polyol
Suqin Tan et al.
POLYMER (2011)
Nanodispersions of carbon nanofiber for polyurethane foaming
G. Harikrishnan et al.
POLYMER (2010)
Polyurethanes From Tung Oil: Polymer Characterization and Composites
M. A. Mosiewicki et al.
POLYMER ENGINEERING AND SCIENCE (2009)
The effect of post-consumer PET particles on the performance of flexible polyurethane foams
Darlan de Mello et al.
POLYMER TESTING (2009)
Tuning of final performances of unsaturated polyester composites with inorganic microsphere/platelet hybrid reinforcers
S Sen et al.
EUROPEAN POLYMER JOURNAL (2001)
Production of a high-functionality RED palm kernel oil-based polyester polyol
KH Badri et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2001)