4.7 Article

Enhancing the chemical foaming process using superplasticizer in aerated geopolymer concrete

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Construction & Building Technology

Effect of hydrophobic surface-modified fine aggregates on efflorescence control in geopolymer

Kirubajiny Pasupathy et al.

Summary: This study evaluates the effect of hydrophobic surface modification of aggregates in controlling efflorescence in geopolymer concrete. The results suggest that hydrophobic fumed silica performs better in preventing efflorescence at lower dosage, while silane creme may hinder geopolymerization process.

CEMENT & CONCRETE COMPOSITES (2022)

Article Green & Sustainable Science & Technology

Formulating eco-friendly geopolymer foam concrete by alkali-activation of ground brick waste

Kirubajiny Pasupathy et al.

Summary: Increasing the alkali content in the mix enhances the reaction kinetics of brick powder, leading to rapid formation of geopolymer gel and subsequently improving the mechanical properties and setting time of BGFCs. The developed BGFCs show a significant reduction in carbon emissions compared to Ordinary Portland cement foamed concrete.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Construction & Building Technology

Progress, current thinking and challenges in geopolymer foam concrete technology

K. Dhasindrakrishna et al.

Summary: Geopolymer foam concrete (GFC) with its porous structure offers lightweight, acoustic and thermal insulation, and fire resistance properties, which are influenced by materials, foaming methods, curing conditions, and additives. Further research is needed in understanding fresh properties, durability, and processing techniques to facilitate industrial applications and the development of 3D printable GFC.

CEMENT & CONCRETE COMPOSITES (2021)

Article Construction & Building Technology

The rheological, fresh and strength effects of cold-bonded geopolymer made with metakaolin and slag for grouting

Hamza Gullu et al.

Summary: The experimental research aimed to investigate the potential use of cold-bonded geopolymer stabilizers, made with metakaolin and slag, for grouting in ground enhancement. Results showed that low replacements of stabilizers (0%-30%) exhibited good rheological and fresh properties, effectively addressing flow issues in grouting. Additionally, adding 10% of metakaolin (MK), slag (SL), and a mixture of slag and metakaolin (GSL + MK) showed the best unconfined compressive strength responses at 28 days.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Rheology control of alkali-activated fly ash with nano clay for cellular geopolymer application

Anvit Gadkar et al.

Summary: An efficient method for producing cellular geopolymer from an alkali-activated fly ash (AAF) binder paste by controlling its rheological behavior is presented. The constant strain rate response of the AAF binder paste varies between a yield-type and Maxwell flow behavior, affecting the porosity of the hardened geopolymer matrix. The addition of nano clay can alter the rheological behavior and increase peak stress, resulting in a stable cellular structure in the AAF binder pastes. Montmorillonite is more effective than Bentonite in enhancing the yield stress of the AAF binder pastes. The cellular structure in the geopolymer matrix can be tailored with rheology control using nano-clay.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Collapse of fresh foam concrete: Mechanisms and influencing parameters

K. Dhasindrakrishna et al.

Summary: This study evaluated the influence of rheology and density on the collapse behavior of mechanically foamed fresh aerated concrete, identifying the critical yield stress for stability and its relationship with foam content. It was found that the experimentally determined critical yield stress to prevent foam collapse aligns well with the drainage-based stability criteria.

CEMENT & CONCRETE COMPOSITES (2021)

Article Construction & Building Technology

Synthesis and properties of thermally enhanced aerated geopolymer concrete using form-stable phase change composite

Sayanthan Ramakrishnan et al.

Summary: This paper investigates the synthesis of phase change material (PCM) composite in aerated/geopolymer concrete, showing enhanced thermal storage capacity. The chemical compatibility, mechanical properties, and thermal performance were experimentally evaluated, with the results indicating improved thermal storage capacity and mechanical properties with the incorporation of PCM composite.

JOURNAL OF BUILDING ENGINEERING (2021)

Review Materials Science, Multidisciplinary

Geopolymer foams: An overview of recent advancements

Rui M. Novais et al.

PROGRESS IN MATERIALS SCIENCE (2020)

Article Construction & Building Technology

A bifunctional hierarchical porous kaolinite geopolymer with good performance in thermal and sound insulation

Huan Gao et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Preparation and characterization of lightweight aggregate foamed geopolymer concretes aerated using hydrogen peroxide

Jinyan Shi et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Effect of yield stress development on the foam-stability of aerated geopolymer concrete

K. Dhasindrakrishna et al.

CEMENT AND CONCRETE RESEARCH (2020)

Article Construction & Building Technology

The effectiveness of different superplasticizers in ambient cured one-part alkali activated pastes

Yazan Alrefaei et al.

CEMENT & CONCRETE COMPOSITES (2019)

Article Construction & Building Technology

A novel inorganic thermal insulation material utilizing perlite tailings

Huan Gao et al.

ENERGY AND BUILDINGS (2019)

Article Construction & Building Technology

Rheology of fly ash-based geopolymer: Effect of NaOH concentration

Yasser Rifaai et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Green & Sustainable Science & Technology

Rheological characterization of low-calcium fly ash suspensions in alkaline silicate colloidal solutions for geopolymer concrete production

Kala Kondepudi et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Article Construction & Building Technology

On the rheology of using geopolymer for grouting: A comparative study with cement-based grout included fly ash and cold bonded fly ash

Hamza Gullu et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Enhancing the strength of pre-made foams for foam concrete applications

Ailar Hajimohammadi et al.

CEMENT & CONCRETE COMPOSITES (2018)

Article Green & Sustainable Science & Technology

Lightweight aerated metakaolin-based geopolymer incorporating municipal solid waste incineration bottom ash as gas-forming agent

Weiping Zhu et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Construction & Building Technology

Rheology, agglomerate structure, and particle shape of fresh geopolymer pastes with different NaOH activators content

Da-Wang Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Materials Science, Ceramics

Fly ash based geopolymeric foams using silica fume as pore generation agent. Physical, mechanical and acoustic properties

Y. Luna-Galiano et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2018)

Article Green & Sustainable Science & Technology

Alkali activated slag foams: The effect of the alkali reaction on foam characteristics

Ailar Hajimohammadi et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Article Materials Science, Multidisciplinary

Pore characteristics in one-part mix geopolymers foamed by H2O2: The impact of mix design

Ailar Hajimohammadi et al.

MATERIALS & DESIGN (2017)

Article Materials Science, Multidisciplinary

Regulating the chemical foaming reaction to control the porosity of geopolymer foams

Ailar Hajimohammadi et al.

MATERIALS & DESIGN (2017)

Article Engineering, Multidisciplinary

Lightweight geopolymer-based hybrid materials

Giuseppina Roviello et al.

COMPOSITES PART B-ENGINEERING (2017)

Article Construction & Building Technology

Improvement on microstructure of concrete by polycarboxylate superplasticizer (PCE) and its influence on durability of concrete

Haoliang Huang et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Proceedings Paper Energy & Fuels

Durability performance of concrete structures built with low carbon construction materials

Kirubajiny Pasupathy et al.

CUE 2015 - APPLIED ENERGY SYMPOSIUM AND SUMMIT 2015: LOW CARBON CITIES AND URBAN ENERGY SYSTEMS (2016)

Article Construction & Building Technology

Mechanical, thermal insulation, thermal resistance and acoustic absorption properties of geopolymer foam concrete

Zuhua Zhang et al.

CEMENT & CONCRETE COMPOSITES (2015)

Review Construction & Building Technology

Geopolymer concrete: A review of some recent developments

B. Singh et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Materials Science, Ceramics

Inorganic foams made from alkali-activated fly ash: Mechanical, chemical and physical properties

P. Hlavacek et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)

Article Construction & Building Technology

Rheology of alkali-activated slag pastes. Effect of the nature and concentration of the activating solution

F. Puertas et al.

CEMENT & CONCRETE COMPOSITES (2014)

Article Materials Science, Ceramics

A comparison between different foaming methods for the synthesis of light weight geopolymers

Giulia Masi et al.

CERAMICS INTERNATIONAL (2014)

Article Construction & Building Technology

The methodology for assessing the impact of new generation superplasticizers on air content in self-compacting concrete

Beata Lazniewska-Piekarczyk

CONSTRUCTION AND BUILDING MATERIALS (2014)

Review Construction & Building Technology

Geopolymer foam concrete: An emerging material for sustainable construction

Zuhua Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Construction & Building Technology

Evaluation of thermal conductivity, mechanical and transport properties of lightweight aggregate foamed geopolymer concrete

Michael Yong Jing Liu et al.

ENERGY AND BUILDINGS (2014)

Article Materials Science, Multidisciplinary

Effect of different superplasticizers and activator combinations on workability and strength of fly ash based geopolymer

Behzad Nematollahi et al.

MATERIALS & DESIGN (2014)

Article Materials Science, Ceramics

Effect of metallic Si addition on polymerization degree of in situ foamed alkali-aluminosilicates

Valentina Medri et al.

CERAMICS INTERNATIONAL (2013)

Article Construction & Building Technology

Rheological behavior of fly ash-based geopolymers with the addition of superplasticizers

Carlos Montes et al.

JOURNAL OF SUSTAINABLE CEMENT-BASED MATERIALS (2012)

Article Green & Sustainable Science & Technology

Environmental impact of cement production: detail of the different processes and cement plant variability evaluation

C. Chen et al.

JOURNAL OF CLEANER PRODUCTION (2010)

Article Construction & Building Technology

The greening of the concrete industry

C. Meyer

CEMENT & CONCRETE COMPOSITES (2009)

Article Construction & Building Technology

Adsorption of superplasticizer admixtures on alkali-activated slag pastes

M. Palacios et al.

CEMENT AND CONCRETE RESEARCH (2009)

Article Mechanics

Motion and shape of bubbles rising through a yield-stress fluid

Darek Sikorski et al.

JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2009)

Article Construction & Building Technology

Heat of hydration in foamed concrete: Effect of mix constituents and plastic density

MR Jones et al.

CEMENT AND CONCRETE RESEARCH (2006)

Article Construction & Building Technology

From mini-cone test to Abrams cone test: measurement of cement-based materials yield stress using slump tests

N Roussel et al.

CEMENT AND CONCRETE RESEARCH (2005)

Article Construction & Building Technology

Structure and properties of aerated concrete: a review

N Narayanan et al.

CEMENT & CONCRETE COMPOSITES (2000)