相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Lightweight foam concrete containing expanded perlite and glass sand: Physico-mechanical, durability, and insulation properties
Osman Gencel et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
A comparative review on foam-based versus lightweight aggregate-based alkali-activated materials and geopolymer
Mehrab Nodehi
INNOVATIVE INFRASTRUCTURE SOLUTIONS (2021)
Effect of cement dosage and waste tire rubber on the mechanical, transport and abrasion characteristics of foam concretes subjected to H2SO4 and freeze-thaw
Oguzhan Yavuz Bayraktar et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Progress, current thinking and challenges in geopolymer foam concrete technology
K. Dhasindrakrishna et al.
CEMENT & CONCRETE COMPOSITES (2021)
Sorptivity and mechanical properties of fiber-reinforced concrete made with seawater and dredged sea-sand
Davoud Vafaei et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Hybrid effect of micro-steel and basalt fibers on physico-mechanical properties and durability of mortars with silica fume
Fuat Koksal et al.
CASE STUDIES IN CONSTRUCTION MATERIALS (2021)
Influence of hydroxypropyl methylcellulose and silica fume on stability, rheological properties, and printability of 3D printing foam concrete
Chao Liu et al.
CEMENT & CONCRETE COMPOSITES (2021)
Effect of silica-fume content on performance of CaCO3 whisker and basalt fiber at matrix interface in cement-based composites
Mehran Khan et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Physico-mechanical, durability and thermal properties of basalt fiber reinforced foamed concrete containing waste marble powder and slag
Oguzhan Yavuz Bayraktar et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Effect of waste marble powder and rice husk ash on the microstructural, physico-mechanical and transport properties of foam concretes exposed to high temperatures and freeze-thaw cycles
Osman Gencel et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Elevated temperature, freezing-thawing and wetting-drying effects on polypropylene fiber reinforced metakaolin based geopolymer composites
Yurdakul Aygormez et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Experimental study on mechanical properties and durability of basalt fiber reinforced coral aggregate concrete
Ditao Niu et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Physical and mechanical properties of foam concretes containing granulated blast furnace slag as fine aggregate
Osman Hulusi Oren et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Engineering Properties of Basalt Fiber-Reinforced Bottom Ash Cement Paste Composites
Mohamad Hanafi et al.
MATERIALS (2020)
Mechanical properties of geopolymer foam at high temperature
Van Su Le et al.
SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2020)
Mechanical and durability properties of hybrid fiber reinforced foam concrete
Bhagyasree Raj et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Thermo-mechanical and moisture absorption properties of fly ash-based lightweight geopolymer concrete reinforced by polypropylene fibers
Yijiang Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Influence of rubber particles on the properties of foam concrete
Essam Eltayeb et al.
JOURNAL OF BUILDING ENGINEERING (2020)
Influence of expanded vermiculite powder and silica fume on properties of foam concretes
Fuat Koksal et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Microstructure, Compressive Strength and Sound Insulation Property of Fly Ash-Based Geopolymeric Foams with Silica Fume as Foaming Agent
Xinhui Liu et al.
MATERIALS (2020)
Compressive and flexural strength of fiber-reinforced foamed concrete: Effect of fiber content, curing conditions and dry density
Devid Falliano et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Mechanical properties of high performance concrete reinforced with basalt fiber and polypropylene fiber
Dehong Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
The effects of pozzolanic powder on foam concrete pore structure and frost resistance
Jianqing Gong et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Investigate the influence of expanded clay aggregate and silica fume on the properties of lightweight concrete
Muhammad Riaz Ahmad et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Effect of fly ash and silica fume on hardened properties of foam concrete
H. Suleyman Gokce et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Effect of nanoparticles on foaming agent and the foamed concrete
Li Hou et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Enhancing the strength of pre-made foams for foam concrete applications
Ailar Hajimohammadi et al.
CEMENT & CONCRETE COMPOSITES (2018)
Mechanical properties, microstructure and drying shrinkage of hybrid fly ash-basalt fiber geopolymer paste
Wonsiri Punurai et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
The influence of lightweight aggregate, freezing-thawing procedure and air entraining agent on freezing-thawing damage
Fatma Karagol et al.
STRUCTURAL CONCRETE (2018)
Determination of air-void system and modified frost resistance number for freeze-thaw resistance evaluation of ternary blended concrete made of ordinary Portland cement/silica fume/class F fly ash
Chang-Seon Shon et al.
COLD REGIONS SCIENCE AND TECHNOLOGY (2018)
Techno-economic analysis of light weight concrete block development from polyisocyanurate foam waste
Premrudee Kanchanapiya et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
Properties of foamed concrete reinforced with hybrid fibres
Waleed Abbas et al.
3RD INTERNATIONAL CONFERENCE ON BUILDINGS, CONSTRUCTION AND ENVIRONMENTAL ENGINEERING, BCEE3-2017 (2018)
Chemical durability and performance of modified basalt fiber in concrete medium
Mahzabin Afroz et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
A green material from rock: basalt fiber - a review
Hafsa Jamshaid et al.
JOURNAL OF THE TEXTILE INSTITUTE (2016)
Corrosion effects on pullout behavior of hooked steel fibers in self-compacting concrete
Cristina Frazao et al.
CEMENT AND CONCRETE RESEARCH (2016)
The effect of antifreeze additives on fresh concrete subjected to freezing and thawing cycles
Riza Polat
COLD REGIONS SCIENCE AND TECHNOLOGY (2016)
Porosity and insulating properties of silica-fume based foams
E. Papa et al.
ENERGY AND BUILDINGS (2016)
Stability and instability of foamed concrete
M. Roderick Jones et al.
MAGAZINE OF CONCRETE RESEARCH (2016)
Mechanical, thermal insulation, thermal resistance and acoustic absorption properties of geopolymer foam concrete
Zuhua Zhang et al.
CEMENT & CONCRETE COMPOSITES (2015)
Proportioning and characterization of Portland cement-based ultra-lightweight foam concretes
Zhaoming Huang et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
A Review: Natural Fiber Composites Selection in View of Mechanical, Light Weight, and Economic Properties
Furqan Ahmad et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2015)
A comparison between different foaming methods for the synthesis of light weight geopolymers
Giulia Masi et al.
CERAMICS INTERNATIONAL (2014)
Effect of particles and aggregated structures on the foam stability and aging
Anne-Laure Fameau et al.
COMPTES RENDUS PHYSIQUE (2014)
Influence of silica fume on stress-strain behavior of FRP-confined HSC
Jian C. Lim et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Geopolymer foam concrete: An emerging material for sustainable construction
Zuhua Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Alkali resistance, microstructural and mechanical performance of zirconia-coated basalt fibers
V. A. Rybin et al.
CEMENT AND CONCRETE RESEARCH (2013)
A novel lightweight concrete-fabrication and its thermal and mechanical properties
Bing Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Cellular concrete properties and the effect of synthetic and protein foaming agents
D. K. Panesar
CONSTRUCTION AND BUILDING MATERIALS (2013)
The influence of water absorption and porosity on the deterioration of cement paste and concrete exposed to elevated temperatures, as in a fire event
Alessandra Mendes et al.
CEMENT & CONCRETE COMPOSITES (2012)
Strength and durability of recycled aggregate concrete containing milled glass as partial replacement for cement
Roz-Ud-Din Nassar et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Durability of inorganic foam in solution: The role of alkali elements in the geopolymer network
Stephanie Delair et al.
CORROSION SCIENCE (2012)
Fly Ash-based Geopolymer Lightweight Concrete Using Foaming Agent
Mohd Mustafa Al Bakri Abdullah et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2012)
Effects of Water Content and Chemical Composition on Structural Properties of Alkaline Activated Metakaolin-Based Geopolymers
Maricela Lizcano et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2012)
Structural Evolution during Geopolymerization from an Early Age to Consolidated Material
Prune Steins et al.
LANGMUIR (2012)
Compressive strength and drying shrinkage of fly ash-bottom ash-silica fume multi-blended cement mortars
Watcharapong Wongkeo et al.
MATERIALS & DESIGN (2012)
Adhesion of Polypropylene Fiber to Cement Matrix
H. R. Pakravan et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2012)
Influence of supplementary cementitious materials on engineering properties of high strength concrete
M. A. Megat Johari et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
EFFECT OF POLYPROPYLENE FIBERS ON CONCRETE FIRE RESISTANCE
Samir Shihada
JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT (2011)
Utilization of fly ash with silica fume and properties of Portland cement-fly ash-silica fume concrete
Thanongsak Nochaiya et al.
FUEL (2010)
Aging of alkali-resistant glass and basalt fibers in alkaline solutions: Evaluation of the failure stress by Weibull distribution function
C. Scheffler et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2009)
Mechanical properties of basalt fiber reinforced geopolymeric concrete under impact loading
Weimin Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Chemical Composition and Mechanical Properties of Basalt and Glass Fibers: A Comparison
Tamas Deak et al.
TEXTILE RESEARCH JOURNAL (2009)
Effects of elevated temperature on compressive strength and weight loss of the light-weight concrete with silica fume and superplasticizer
Emre Sancak et al.
CEMENT & CONCRETE COMPOSITES (2008)
Rice husk ash blended cement: Assessment of optimal level of replacement for strength and permeability properties of concrete
K. Ganesan et al.
CONSTRUCTION AND BUILDING MATERIALS (2008)
Fresh state characteristics of foam concrete
E. K. Kunhanandan Nambiar et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2008)
Effect of polypropylene fibers on shrinkage and cracking of concretes
T. Aly et al.
MATERIALS AND STRUCTURES (2008)
Sorption characteristics of foam concrete
E. K. Kunhanandan Nambiar et al.
CEMENT AND CONCRETE RESEARCH (2007)
Unrestrained early age shrinkage of concrete with polypropylene, PVA, and carbon fibers
Thanasak Wongtanakitcharoen et al.
MATERIALS AND STRUCTURES (2007)
Quantifying shrinkage cracking in fiber reinforced concrete using the ring test
H. R. Shah et al.
MATERIALS AND STRUCTURES (2006)
Strength of lightweight glass aggregate concrete
Rita Nemes et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2006)
Influence of filler type on the properties of foam concrete
E. K. Kunhanandan Nambiar et al.
CEMENT & CONCRETE COMPOSITES (2006)
Alkali activation of fly ashes.: Part 1:: Effect of curing conditions on the carbonation of the reaction products
A Criado et al.
FUEL (2005)
Effect of silica fume on mechanical properties of high-strength concrete
M Mazloom et al.
CEMENT & CONCRETE COMPOSITES (2004)
Porosity and permeability of foamed concrete
EP Kearsley et al.
CEMENT AND CONCRETE RESEARCH (2001)
Long-term drying shrinkage of mortar - influence of silica fume and size of fine aggregate
GA Rao
CEMENT AND CONCRETE RESEARCH (2001)