相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。A novel hybrid extreme learning machine-grey wolf optimizer (ELM-GWO) model to predict compressive strength of concrete with partial replacements for cement
Mahdi Shariati et al.
ENGINEERING WITH COMPUTERS (2022)
Splice methods used for reinforcement steel bars: A state-of-the-art review
Hamed Dabiri et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Seismic performance of a novel partial precast RC shear wall with reserved cast-in-place base and wall edges
Suiwen Wu et al.
SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2022)
A comparison of machine learning- and regression-based models for predicting ductility ratio of RC beam-column joints
Hamed Dabiri et al.
STRUCTURES (2022)
Machine learning techniques for structural health monitoring of heritage buildings: A state-of-the-art review and case studies
Mayank Mishra
JOURNAL OF CULTURAL HERITAGE (2021)
Mechanistically Informed Machine Learning and Artificial Intelligence in Fire Engineering and Sciences
M. Z. Naser
FIRE TECHNOLOGY (2021)
Machine learning-based prediction of CFST columns using gradient tree boosting algorithm
Quang-Viet Vu et al.
COMPOSITE STRUCTURES (2021)
Concrete compressive strength prediction modeling utilizing deep learning long short-term memory algorithm for a sustainable environment
Sarmad Dashti Latif
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)
Innovative Computational Intelligence-Based Model for Vulnerability Assessment of RC Frames Subject to Seismic Sequence
Masoomeh Mirrashid et al.
JOURNAL OF STRUCTURAL ENGINEERING (2021)
Predicting the Effect of Fly Ash on Concrete's Mechanical Properties by ANN
Mohammad Mehdi Roshani et al.
SUSTAINABILITY (2021)
StructuresNet and FireNet: Benchmarking databases and machine learning algorithms in structural and fire engineering domains
M. Z. Naser et al.
JOURNAL OF BUILDING ENGINEERING (2021)
An experimental comparison of RC beam-column joints incorporating different splice methods in the beam
Hamed Dabiri et al.
STRUCTURES (2021)
An experimental study on the influence of incorporating lap or forging (GPW) splices on the cyclic performance of RC columns
Ali Kheyroddin et al.
ENGINEERING STRUCTURES (2021)
An artificial bee colony-based kernel ridge regression for automobile insurance fraud identification
Chun Yan et al.
NEUROCOMPUTING (2020)
Prediction of shear strength and behavior of RC beams strengthened with externally bonded FRP sheets using machine learning techniques
Omar R. Abuodeh et al.
COMPOSITE STRUCTURES (2020)
New empirical approach for determining nominal shear capacity of steel fiber reinforced concrete beams
Masoud Ahmadi et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Statistical estimation the thermal conductivity of MWCNTs-SiO2/Water-EG nanofluid using the ridge regression method
Dai Xiaohong et al.
PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2020)
Dynamic Tensile Behavior of Steel HRB500E Reinforcing Bar at Low, Medium, and High Strain Rates
Xiang Zeng et al.
MATERIALS (2020)
Machine learning study of the mechanical properties of concretes containing waste foundry sand
Ali Behnood et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Prediction of the Load-Bearing Behavior of SPSW with Rectangular Opening by RBF Network
Mohammad Javad Moradi et al.
APPLIED SCIENCES-BASEL (2020)
Behavior of Grouted Sleeve Splice for Steel Profile under Tensile Loadings
Feng Lin et al.
MATERIALS (2020)
Experimental investigation of using mechanical splices on the cyclic performance of RC columns
Ali Kheyroddin et al.
STRUCTURES (2020)
Estimation of the compressive strength of concretes containing ground granulated blast furnace slag using hybridized multi-objective ANN and salp swarm algorithm
Amirreza Kandiri et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Mechanical bar splices for incorporation in plastic hinge regions of RC members
Puskar Kumar Dahal et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Failure mode and effects analysis of RC members based on machine-learning-based SHapley Additive exPlanations (SHAP) approach
Sujith Mangalathu et al.
ENGINEERING STRUCTURES (2020)
Progressive collapse design of reinforced concrete frames using structural optimization and machine learning
M. J. Esfandiari et al.
STRUCTURES (2020)
Cyclic performance of RC beam-column joints with mechanical or forging (GPW) splices; an experimental study
Ali Kheyroddin et al.
STRUCTURES (2020)
Bond strength prediction of the composite rebars in concrete using innovative bio-inspired models
Fatemeh Alizadeh et al.
ENGINEERING REPORTS (2020)
Modelling of a surface marine vehicle with kernel ridge regression confidence machine
David Moreno-Salinas et al.
APPLIED SOFT COMPUTING (2019)
Inelastic cyclic behaviour of RC members incorporating threaded reinforcement couplers
D. V. Bompa et al.
ENGINEERING STRUCTURES (2019)
Innovative models for prediction of compressive strength of FRP-confined circular reinforced concrete columns using soft computing methods
H. Naderpour et al.
COMPOSITE STRUCTURES (2019)
Experimental investigation on the deformation capacity of lap splices under cyclic loading
Danilo Tarquini et al.
BULLETIN OF EARTHQUAKE ENGINEERING (2019)
Load-carrying capacity and mode failure simulation of beam-column joint connection: Application of self-tuning machine learning model
Afrah Abdulelah Hamzah Alwanas et al.
ENGINEERING STRUCTURES (2019)
Artificial neural network for predicting the flexura bond strength of FRP bars in concrete
Mehmet Alpaslan Koroglu
SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2019)
Evaluation of Tensile Performance of Steel Members by Analysis of Corroded Steel Surface Using Deep Learning
Pang-jo Chun et al.
METALS (2019)
Elevated temperature characteristics of steel reinforcement incorporating threaded mechanical couplers
D. V. Bompa et al.
FIRE SAFETY JOURNAL (2019)
Performance evaluation of innovative hybrid rebar coupler in reinforced concrete beams subjected to monotonic loading
Rajendran Siva Chidambaram et al.
STRUCTURAL CONCRETE (2018)
Tensile behavior of half grouted sleeve connection at elevated temperatures
Wangxi Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Crack growth modeling of tension lap spliced reinforced concrete beams strengthened with fibre reinforced polymer wrapping under fatigue loading
Rayed Alyousef et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Parametric study on a novel grouted rolling pipe splice for precast concrete construction
Yongfeng Zheng et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Seismic behavior of precast columns with large-spacing and high-strength longitudinal rebars spliced by epoxy mortar-filled threaded couplers
Wenlong Han et al.
ENGINEERING STRUCTURES (2018)
Monotonic and cyclic performance of threaded reinforcement splices
D. Bompa et al.
STRUCTURES (2018)
The performance of lap splices in RC beams under inelastic reversed cyclic loading
M. A. Najafgholipour et al.
STRUCTURES (2018)
Ductility considerations for mechanical reinforcement couplers
D. V. Bompa et al.
STRUCTURES (2017)
Tensile behavior of half grouted sleeve connections: Experimental study and analytical modeling
Huang Yuan et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Tensile strength of the grout-filled head-splice-sleeve
Soo-Yeon Seo et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Models for predicting elastic modulus and tensile strength of carbon, basalt and hybrid carbon-basalt FRP laminates at elevated temperatures
Rami A. Hawileh et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Seismic design of bridge columns incorporating mechanical bar splices in plastic hinge regions
Mostafa Tazarv et al.
ENGINEERING STRUCTURES (2016)
Tensile capacity of grouted splice sleeves
Jen Hua Ling et al.
ENGINEERING STRUCTURES (2016)
Mechanical Performance and Stress-Strain Relationships for Grouted Splices Under Tensile and Cyclic Loadings
Feng Lin et al.
INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS (2016)
Modeling and Optimizing Tensile Strength and Yield Point on a Steel Bar Using an Artificial Neural Network With Taguchi Particle Swarm Optimizer
Ping-Yi Chou et al.
IEEE ACCESS (2016)
Seismic Performance of Precast Columns with Mechanically Spliced Column-Footing Connections
Zachary B. Haber et al.
ACI STRUCTURAL JOURNAL (2015)
The influence of percentage of bars lapped on performance of splices
Giovanni Metelli et al.
MATERIALS AND STRUCTURES (2015)
Feasibility study of grouted splice connector under tensile load
Ling Jen Hua et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
The relationship between interlocking mechanism and bond strength in elastic and inelastic segment of splice sleeve
Ali A. Sayadi et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Numerical implementation of EPR-based material models in finite element analysis
Asaad Faramarzi et al.
COMPUTERS & STRUCTURES (2013)
Artificial Neural Network Predictions of Fatigue Life of Steel Bars Based on Hysteretic Energy
Jamal A. Abdalla et al.
JOURNAL OF COMPUTING IN CIVIL ENGINEERING (2013)
EPR-based material modelling of soils considering volume changes
Asaad Faramarzi et al.
COMPUTERS & GEOSCIENCES (2012)
Prediction of bond strength of spliced steel bars in concrete using artificial neural network and fuzzy logic
Emadaldin Mohammadi Golafshani et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Modelling stress-strain and volume change behaviour of unsaturated soils using an evolutionary based data mining technique, an incremental approach
A. A. Javadi et al.
ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (2012)
Bond Strength of Mortar-filled Steel Pipe Splices Reflecting Confining Effect
Hyong-Kee Kim
JOURNAL OF ASIAN ARCHITECTURE AND BUILDING ENGINEERING (2012)
Modeling and simulation of low-cycle fatigue life of steel reinforcing bars using artificial neural network
Jamal A. Abdalla et al.
JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS (2011)
Energy-based prediction of low-cycle fatigue life of BS 460B and BS B500B steel bars
J. A. Abdalla et al.
MATERIALS & DESIGN (2009)
An experimental study of welded splices of reinforcing bars
CA Issa et al.
BUILDING AND ENVIRONMENT (2006)
Reinforced concrete beam-column joints with lap splices under cyclic loading
AI Karabinis
STRUCTURAL ENGINEERING AND MECHANICS (2002)
分享论文
