相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Effect of nano-alumina modified foaming agents on properties of foamed concrete
Yuanliang Xiong et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Effect of polyethylene fiber content on workability and mechanical-anisotropic properties of 3D printed ultra-high ductile concrete
Junhong Ye et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Influence of hydroxypropyl methylcellulose and silica fume on stability, rheological properties, and printability of 3D printing foam concrete
Chao Liu et al.
CEMENT & CONCRETE COMPOSITES (2021)
Large-scale 3D printing concrete technology: Current status and future opportunities
Jianzhuang Xiao et al.
CEMENT & CONCRETE COMPOSITES (2021)
Rheology and application of buoyant foam concrete for digital fabrication
Seung Cho et al.
COMPOSITES PART B-ENGINEERING (2021)
A critical review of 3D printing in construction: benefits, challenges, and risks
S. El-Sayegh et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2020)
Rheological parameters, thixotropy and creep of 3D-printed calcium sulfoaluminate cement composites modified by bentonite
Mingxu Chen et al.
COMPOSITES PART B-ENGINEERING (2020)
Improvement of viscosity-modifying agents on air-void system of vibrated concrete
Junyi Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Yield stress and thixotropy control of 3D-printed calcium sulfoaluminate cement composites with metakaolin related to structural build-up
Mingxu Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture
Yu Chen et al.
CEMENT AND CONCRETE RESEARCH (2020)
Extrusion-based additive manufacturing with cement-based materials - Production steps, processes, and their underlying physics: A review
V Mechtcherine et al.
CEMENT AND CONCRETE RESEARCH (2020)
Foamed geopolymer: The relationship between rheological properties of geopolymer paste and pore-formation mechanism
Gonghui Gu et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Layer-interface properties in 3D printed concrete: Dual hierarchical structure and micromechanical characterization
Zifan Geng et al.
CEMENT AND CONCRETE RESEARCH (2020)
Effect of yield stress development on the foam-stability of aerated geopolymer concrete
K. Dhasindrakrishna et al.
CEMENT AND CONCRETE RESEARCH (2020)
Characterizing cement mixtures for concrete 3D printing
Karthick Manikandan et al.
MANUFACTURING LETTERS (2020)
3D printable concrete: Mixture design and test methods
A. V. Rahul et al.
CEMENT & CONCRETE COMPOSITES (2019)
Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing
Guowei Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Preparation and Physical Properties of High-Belite Sulphoaluminate Cement-Based Foam Concrete Using an Orthogonal Test
Chao Liu et al.
MATERIALS (2019)
Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing
Venkatesh Naidu Nerella et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Method of enhancing interlayer bond strength in construction scale 3D printing with mortar by effective bond area amplification
Taylor Marchment et al.
MATERIALS & DESIGN (2019)
Optimal cement paste yield stress for the production of stable cement foams
Blandine Feneuil et al.
CEMENT AND CONCRETE RESEARCH (2019)
Material Design and Performance Evaluation of Foam Concrete for Digital Fabrication
Viacheslav Markin et al.
MATERIALS (2019)
Large-scale digital concrete construction-CONPrint3D concept for on-site, monolithic 3D-printing
Viktor Mechtcherine et al.
AUTOMATION IN CONSTRUCTION (2019)
Synthesis and characterization of 3D-printable geopolymeric foams for thermally efficient building envelope materials
Hussam Alghamdi et al.
CEMENT & CONCRETE COMPOSITES (2019)
Design of 3D printable concrete based on the relationship between flowability of cement paste and optimum aggregate content
Chao Zhang et al.
CEMENT & CONCRETE COMPOSITES (2019)
A review of the current progress and application of 3D printed concrete
Jingchuan Zhang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Printability region for 3D concrete printing using slump and slump flow test
Yi Wei Daniel Tay et al.
COMPOSITES PART B-ENGINEERING (2019)
Calcination of green high-belite sulphoaluminate cement (GHSC) and performance optimizations of GHSC-based foamed concrete
Chao Liu et al.
MATERIALS & DESIGN (2019)
A feasible method for measuring the buildability of fresh 3D printing mortar
Qiang Yuan et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Application of organic- and nanoparticle-modified foams in foamed concrete: Reinforcement and stabilization mechanisms
Wei She et al.
CEMENT AND CONCRETE RESEARCH (2018)
Rheological requirements for printable concretes
Nicolas Roussel
CEMENT AND CONCRETE RESEARCH (2018)
Fresh properties of a novel 3D printing concrete ink
Yu Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effect of surface moisture on inter-layer strength of 3D printed concrete
Jay G. Sanjayan et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Physico-chemical interaction between mineral admixtures and OPC-calcium sulfoaluminate (CSA) cements and its influence on early-age expansion
Piyush Chaunsali et al.
CEMENT AND CONCRETE RESEARCH (2016)
Effects of mineral admixtures and additional gypsum on the expansion performance of sulphoaluminate expansive agent at simulation of mass concrete environment
Ge Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Study on the preparation and properties of high-porosity foamed concretes based on ordinary Portland cement
Jun Jiang et al.
MATERIALS & DESIGN (2016)
Hydration of ordinary Portland cement and calcium sulfoaluminate cement blends
R. Trauchessec et al.
CEMENT & CONCRETE COMPOSITES (2015)
The origins of thixotropy of fresh cement pastes
N. Roussel et al.
CEMENT AND CONCRETE RESEARCH (2012)
分享论文
