☆ 4.7 Article

In-situ synthesized age-hardenable high-entropy composites with superior wear resistance

COMPOSITES PART B-ENGINEERING (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Heterogeneous lamella design to tune the mechanical behaviour of a new cost-effective compositionally complicated alloy

Yu Yin et al.

Summary: The mechanical properties of a new cost-effective alloy were manipulated using a heterogeneous lamella design strategy. The design, involving composition and thermomechanical process, led to enhanced performance, with high yield strength and good ductility in comparison with other cost-effective alloys. This approach opens up new possibilities for the development of high-performance and cost-effective alloys.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Refinement of primary carbides in hypereutectic high-chromium cast irons: a review

Abhi-Shek Jain et al.

Summary: High-chromium cast irons are widely used in mining and cement industries for their excellent wear resistance, but their brittleness can lead to early failure of components. Various techniques have been developed to modify the carbide morphology and refine their size, aiming to improve the mechanical performance and service life of these materials. This review discusses the available methods and possible mechanisms for refinement of primary carbides in high-chromium cast irons, with the goal of developing more effective techniques and alloys to optimize their properties.

JOURNAL OF MATERIALS SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-temperature ultra-strength of dual-phase Re0.5 MoNbW(TaC)0.5 high-entropy alloy matrix composite

Qinqin Wei et al.

Summary: The dual-phase Re0.5MoNbW(TaC)(0.5) composite, synthesized by arc melting, exhibited remarkably high-temperature strength with a yield strength of approximately 901 MPa and a true ultimate compressive strength of around 1186 MPa at 1200 degrees C. The semi-coherent interface between the BCC phase and carbide, along with dipolar dislocation walls in the BCC phase and restricted dynamic interaction between defects in the carbide, provided effective strengthening effects.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Physical

In-situ Ti(C, N) reinforced AlCoCrFeNiSi-based high entropy alloy coating with functional gradient double-layer structure fabricated by laser cladding

Guanghua Yan et al.

Summary: A functional gradient double-layer structure coating of AlCoCrFeNiSi-based high entropy alloy with in-situ Ti(C, N) reinforcement was successfully fabricated using laser cladding. The presence of Ti(C, N) ceramic particles contributed to the high surface hardness and wear resistance of the coating, improving the wear resistance of the H13 substrate significantly.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Chemistry, Physical

Fracture and wear mechanisms of FeMnCrNiCo plus x(TiC) composite high-entropy alloy cladding layers

Yangchuan Cai et al.

Summary: The particles in the composite high-entropy alloy coatings both promote the nucleation of grains and hinder the movement of grain boundaries. The refined grain structure and increased dislocation density enhance the coatings' resistance to potential plastic deformation.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

A cost-effective Fe-rich compositionally complicated alloy with superior high-temperature oxidation resistance

Yu Yin et al.

Summary: The novel Fe45Ni25Cr25Mo5 alloy shows excellent high-temperature oxidation resistance due to the formation of a compact and hard chromia scale, which effectively protects the substrate and improves crack resistance.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

A novel in-situ exothermic assisted sintering high entropy Al2O3/(NbTaMoW)C composites: Microstructure and mechanical properties

Diqiang Liu et al.

Summary: A new Al2O3/(NbTaMoW)C composite was designed in this study using an in-situ exothermic reaction method. The resulting composite exhibited a unique microstructure with high entropy carbide and Al2O3 phases, and a noncoherent interface between the two phases which enhanced the mechanical properties such as flexural strength and fracture toughness. The presence of an interlocking structure and inhomogeneous temperature distribution contributed to the improved properties of the composites compared to traditional (NbTaMoW)C materials.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

High Entropy Alloy Coatings and Technology

Ashutosh Sharma

Summary: Recently, there has been a significant increase in the development of multicomponent alloys known as high entropy alloys (HEAs) with extraordinary properties and applications. Various applications of HEAs in surface protection and engineering are being explored for their attractive performances in different environments. This review article categorizes HEA coatings into metallic, ceramic, and composite ones, highlighting different fabrication strategies, properties, and important applications, while also discussing future possibilities in this area for coatings development.

COATINGS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

In-situ formed graphene providing lubricity for the FeCoCrNiAl based composite containing graphite nanoplate

Long Wang et al.

Summary: A FeCoCrNiAl high entropy alloy matrix composite containing graphite nanoplates was produced by spark plasma sintering method, and its tribological properties were tested under various loads and velocities. The results showed that the addition of graphite nanoplates significantly reduced the coefficient of friction and wear, attributing to the in-situ formed graphene and tribo-induced oxide layer on the rubbing interface.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Understanding the microstructure and mechanical properties of TaxAl0.7CoCrFeNi2.1 eutectic high entropy composites: Multi-scale deformation mechanism analysis

Min Jung Kim et al.

Summary: The study on EHECs revealed changes in phase composition, microstructure, and mechanical properties as the x value increased, leading to variations in the eutectic matrix composition and an increase in yield strength while decreasing plasticity.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

A carbide-reinforced Re0.5MoNbW(TaC)0.8 eutectic high-entropy composite with outstanding compressive properties

Q. Q. Wei et al.

Summary: In this study, a high strength-ductile matching Re0.5MoNbW(TaC)(0.8) eutectic high-entropy composite was fabricated and demonstrated excellent mechanical properties that exceed previously reported refractory high-entropy alloys and HECs. The study suggests a strategy to design strong and ductile HECs for high-temperature applications.

SCRIPTA MATERIALIA (2021)

添加到收藏夹

Article Chemistry, Physical

Wear-Resistant TiC Strengthening CoCrNi-Based High-Entropy Alloy Composite

Yanlin Cai et al.

Summary: The addition of TiC improved the mechanical properties and wear resistance of CoCrNi alloy, with the wear resistance of CoCrNi/(TiC)(x) composites increasing with the increasing content of TiC addition.

MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

A particle reinforced NbTaTiV refractory high entropy alloy based composite with attractive mechanical properties

Ao Fu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Engineering, Industrial

Microstructure and wear resistance of TiAlNiSiV high-entropy laser cladding coating on Ti-6Al-4V

H. X. Zhang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy

X. H. Du et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Spheroidization behaviour of a Fe-enriched eutectic high-entropy alloy

Yu Yin et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

High-temperature age-hardening of a novel cost-effective Fe45Ni25Cr25Mo5 high entropy alloy

Yu Yin et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fabrication and wear behavior of TiC reinforced FeCoCrAlCu-based high entropy alloy coatings by laser surface alloying

P. F. Jiang et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

添加到收藏夹

Article Chemistry, Physical

Microstructure evolution, mechanical properties and strengthening mechanism of refractory high-entropy alloy matrix composites with addition of TaC

Qinqin Wei et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Chemistry, Physical

Influence of NbC particles on microstructure and mechanical properties of AlCoCrFeNi high-entropy alloy coatings prepared by laser cladding

Xiaofeng Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Novel cost-effective Fe-based high entropy alloys with balanced strength and ductility

Yu Yin et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Chemistry, Physical

Microstructure of Ti-Ag immiscible alloys with liquid phase separation

Takeshi Nagase et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Chemistry, Physical

A novel High-Entropy Alloy-based composite material

Sephira Riva et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys

T. Yang et al.

SCIENCE (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

A critical review of high entropy alloys and related concepts

D. B. Miracle et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ab initio assisted design of quinary dual-phase high-entropy alloys with transformation-induced plasticity

Zhiming Li et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off

Zhiming Li et al.

NATURE (2016)

添加到收藏夹

Article Materials Science, Coatings & Films

Evolution of microstructure and mechanical properties of in situ synthesized TiC-TiB2/CoCrCuFeNi high entropy alloy coatings

Jiangbo Cheng et al.

SURFACE & COATINGS TECHNOLOGY (2015)

添加到收藏夹

Review Materials Science, Multidisciplinary

Microstructures and properties of high-entropy alloys

Yong Zhang et al.

PROGRESS IN MATERIALS SCIENCE (2014)

添加到收藏夹

Article Chemistry, Physical

Microstructure and properties of Al2CrFeCoCuTiNix high-entropy alloys prepared by laser cladding

Xing-Wu Qiu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dry sliding wear behavior of laser clad TiVCrAlSi high entropy alloy coatings on Ti-6Al-4V substrate

Can Huang et al.

MATERIALS & DESIGN (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Prediction of high-entropy stabilized solid-solution in multi-component alloys

X. Yang et al.

MATERIALS CHEMISTRY AND PHYSICS (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys

Ming-Hao Chuang et al.

ACTA MATERIALIA (2011)

添加到收藏夹

Article Engineering, Mechanical

Effect of iron content on wear behavior of AlCoCrFexMo0.5Ni high-entropy alloys

Chin-You Hsu et al.

WEAR (2010)

添加到收藏夹

Article Materials Science, Coatings & Films

Microstructure and wear properties of multicomponent alloy cladding formed by gas tungsten arc welding (GTAW)

J. H. Chen et al.

SURFACE & COATINGS TECHNOLOGY (2009)

添加到收藏夹

Article Engineering, Mechanical

Mechanisms of sliding wear of metals and alloys at elevated temperatures

A. Pauschitz et al.

TRIBOLOGY INTERNATIONAL (2008)

添加到收藏夹

Article Engineering, Mechanical

Adhesive wear behavior of AlxCoCrCuFeNi high-entropy alloys as a function of aluminum content

Jien-Min Wu et al.

WEAR (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and properties of Al0.5CoCrCuFeNiTix (x=0-2.0) high-entropy alloys

Min-Rui Chen et al.

MATERIALS TRANSACTIONS (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of vanadium addition on the microstructure, hardness, and wear resistance of Al0.5CoCrCuFeNi high-entropy alloy

Min-Rui Chen et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes

JW Yeh et al.

ADVANCED ENGINEERING MATERIALS (2004)

添加到收藏夹

Article Engineering, Mechanical

High-temperature sliding wear of metals

FH Stott

TRIBOLOGY INTERNATIONAL (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.