相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Microwave heating and curing of metal-like CFRP laminates through ultrathin and flexible resonance structures
Jing Zhou et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2022)
Zone-regulated microwave heating of CFRP laminates via ultrathin and flexible resonance structures with different working frequencies
Jing Zhou et al.
COMPOSITES COMMUNICATIONS (2022)
Development of sustainable microwave-based approach to recover glass fibers for wind turbine blades composite waste
Manjeet Rani et al.
RESOURCES CONSERVATION AND RECYCLING (2022)
Performance evaluation of HDPE/MWCNT and HDPE/kenaf composites
Nayan Pundhir et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2021)
Utilization of forest and plastic wastes for composite manufacturing using microwave-assisted compression molding for low load applications
Renu Tewari et al.
JOURNAL OF POLYMER RESEARCH (2021)
Improvement of Heating Uniformity by Limiting the Absorption of Hot Areas in Microwave Processing of CFRP Composites
Shengping Li et al.
MATERIALS (2021)
Effect of lay-up configuration on the microwave absorption properties of carbon fiber reinforced polymer composite materials
Jing Zhou et al.
MATERIALS TODAY COMMUNICATIONS (2021)
Thermal post-processing of bagasse fiber reinforced polypropylene composites
Manish Kumar Lila et al.
COMPOSITES COMMUNICATIONS (2021)
Comparative study of in-situ temperature measurement during microwave-assisted compression-molding and conventionally compression-molding process
Nishant Verma et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2021)
Characterization of chemically treated new natural cellulosic fibers from peduncle of Cocos nucifera L. Var typica
Brailson Mansingh Bright et al.
POLYMER COMPOSITES (2021)
Influence of microwave power on mechanical properties of microwave-cured polyethylene/coir composites
Manoj Kumar Singh et al.
JOURNAL OF NATURAL FIBERS (2020)
Interfacial enhancement for carbon fibre reinforced electron beam cured polymer composite by microwave irradiation
Jingjing Zhang et al.
POLYMER (2020)
A new study on effect of various chemical treatments on Agave Americana fiber for composite reinforcement: Physico-chemical, thermal, mechanical and morphological properties
P. Madhu et al.
POLYMER TESTING (2020)
Abrasive Wear Mechanism of Microwave-Assisted Compression Molded Kenaf/HDPE Composite
Manoj Kumar Singh et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2020)
Effect of microwave assisted alkali pretreatment and other pretreatment methods on some properties of bamboo fibre reinforced cement composites
A. Banjo Akinyemi et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
On microwave drilling of metal-based materials at 2.45 GHz
Anurag Singh et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2020)
Microwave-synthesized Mg+2 doped jute fibers and their application as a reinforcement in biocomposites
Saurabh Chaitanya et al.
COMPOSITES PART B-ENGINEERING (2020)
Application of microwave energy for rapid fabrication of nano-hydroxyapatite reinforced polycaprolactone composite foam
Nishant Verma et al.
MANUFACTURING LETTERS (2020)
Microwave absorbing behavior of glass fiber reinforced MWCNT-PANi/epoxy composite laminates
E. J. Jelmy et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Vacuum-assisted microwave curing of epoxy/carbon fiber composite: An attempt for defect reduction in processing
Nishant Verma et al.
MANUFACTURING LETTERS (2020)
Development and mechanical characterization of microwave-cured thermoplastic based natural fibre reinforced composites
Manoj Kumar Singh et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2019)
Microwave curing of multidirectional carbon fiber reinforced polymer composites
Yingguang Li et al.
COMPOSITE STRUCTURES (2019)
Characterization of raw and alkali treated new natural cellulosic fibers from Tridax procumbens
R. Vijay et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)
Response of coir fibre reinforced cement composites to water repellent chemical additive and microwave accelerated curing
Banjo A. Akinyemi et al.
CELLULOSE (2019)
Development and characterisation of poly-L-lactide-based foams fabricated through microwave-assisted compression moulding
Manoj Kumar Singh et al.
JOURNAL OF CELLULAR PLASTICS (2019)
Online learning based intelligent temperature control during polymer composites microwave curing process
Jing Zhou et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Recyclability analysis of PLA/Sisal fiber biocomposites
Saurabh Chaitanya et al.
COMPOSITES PART B-ENGINEERING (2019)
Influence of curing condition on thermo-mechanical properties of fly ash reinforced epoxy composite
A. Pattanaik et al.
COMPOSITES PART B-ENGINEERING (2019)
Microwave-assisted composite fabrication of nano-hydroxyapatite reinforced ultra-high molecular weight polyethylene composite
Nishant Verma et al.
MATERIALS RESEARCH EXPRESS (2019)
Fabrication and characterization of microwave cured high-density polyethylene/carbon nanotube and polypropylene/carbon nanotube composites
Gaurav Arora et al.
JOURNAL OF COMPOSITE MATERIALS (2019)
Vacuum-assisted microwave processing of glass-epoxy composite laminates using novel microwave absorbing molds
Sandhya Rao et al.
POLYMER COMPOSITES (2018)
Melting of bulk non-ferrous metallic materials by microwave hybrid heating (MHH) and conventional heating: a comparative study on energy consumption
Shashank M. Lingappa et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2018)
Simple analytical approach for industrial microwave applicator design
Guido Link et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2018)
A multi-pattern compensation method to ensure even temperature in composite materials during microwave curing process
Jing Zhou et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Curing multidirectional carbon fiber reinforced polymer composites with indirect microwave heating
Yingguang Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Microwave-Assisted Curing of Silicon Carbide-Reinforced Epoxy Composites: Role of Dielectric Properties
Ranu Pal et al.
JOM (2018)
Accelerated microwave curing of fibre-reinforced thermoset polymer composites for structural applications: A review of scientific challenges
Chinedum Ogonna Mgbemena et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Effect of microwave treatment on tensile properties of sugar palm fibre reinforced thermoplastic polyurethane composites
A. A. Mohammed et al.
DEFENCE TECHNOLOGY (2018)
Effect of High-frequency Microwave Radiation on the Mechanical Properties of Plantain (Musa paradisiaca) Fibre/Epoxy Biocomposite
Patrick Ehi Imoisili et al.
JOURNAL OF PHYSICAL SCIENCE (2018)
Effects of temperature profiles of microwave curing processes on mechanical properties of carbon fibre-reinforced composites
Xiang Hang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2017)
Enhanced interlaminar fracture toughness of carbon fiber/bismaleimide composites via microwave curing
Jing Zhou et al.
JOURNAL OF COMPOSITE MATERIALS (2017)
Thermoplastic carbon fibre-reinforced polymer recycling with electrodynamical fragmentation: From cradle to cradle
Maxime Roux et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2017)
Welding of 3D-printed carbon nanotube-polymer composites by locally induced microwave heating
Charles B. Sweeney et al.
SCIENCE ADVANCES (2017)
A new process control method for microwave curing of carbon fibre reinforced composites in aerospace applications
Nanya Li et al.
COMPOSITES PART B-ENGINEERING (2017)
Rapid curing and additive manufacturing of thermoset systems using scanning microwave heating of carbon nanotube/epoxy composites
Morgan G. B. Odom et al.
CARBON (2017)
Enhanced microwave processing of epoxy nanocomposites using carbon black powders
Ranu Pal et al.
ADVANCED POWDER TECHNOLOGY (2017)
Effect of microwave irradiation on carbon fiber/epoxy resin composite fabricated by vacuum assisted resin transfer molding
Daisuke Shimamoto et al.
ADVANCED COMPOSITE MATERIALS (2016)
Microwave-material interaction phenomena: Heating mechanisms, challenges and opportunities in material processing
Radha Raman Mishra et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Effect of microwave curing process on the flexural strength and interlaminar shear strength of carbon fiber/bismaleimide composites
Xuehong Xu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
Interfacial shear strength of microwave processed carbon fiber/epoxy composites characterized by an improved fiber-bundle pull-out test
Jing Zhou et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
A Review of Research Trends in Microwave Processing of Metal-Based Materials and Opportunities in Microwave Metal Casting
Radha Raman Mishra et al.
CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2016)
A Novel Method for Curing Carbon Fiber Reinforced Plastics by High-pressure Microwave
Xiaoping Chen et al.
FIBERS AND POLYMERS (2016)
Improvement of the Compressive Strength of Carbon Fiber/Epoxy Composites via Microwave Curing
Xuehong Xu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2016)
Microwave Rapid Sintering of Al-Metal Matrix Composites: A Review on the Effect of Reinforcements, Microstructure and Mechanical Properties
Penchal Reddy Matli et al.
METALS (2016)
Microwave curing of carbon fiber/bismaleimide composite laminates: Material characterization and hot pressing pretreatment
Xuehong Xu et al.
MATERIALS & DESIGN (2016)
On mechanism of in-situ microwave casting of aluminium alloy 7039 and cast microstructure
Radha Raman Mishra et al.
MATERIALS & DESIGN (2016)
Melting of tin using muffle furnace and microwave energy and its characterization
T. R. Gouthama et al.
INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND MANUFACTURING APPLICATIONS (ICONAMMA-2016) (2016)
Microwave curing of carbon-epoxy composites: Penetration depth and material characterisation
M. Kwak et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Drilling delamination and thermal damage of carbon nanotube/carbon fiber reinforced epoxy composites processed by microwave curing
Nanya Li et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)
A Review of Natural Fibers Used in Biocomposites: Plant, Animal and Regenerated Cellulose Fibers
Sunil Kumar Ramamoorthy et al.
POLYMER REVIEWS (2015)
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Layth Mohammed et al.
INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2015)
Carbon fiber/epoxy composite materials cured thermally and with microwave irradiation
Kimiyasu Sato et al.
COMPOSITE INTERFACES (2015)
Microwave Processing of Materials and Applications in Manufacturing Industries: A Review
Satnam Singh et al.
MATERIALS AND MANUFACTURING PROCESSES (2015)
Microwaves and microreactors: Design challenges and remedies
Guido S. J. Sturm et al.
CHEMICAL ENGINEERING JOURNAL (2014)
Impact behaviour of basalt fibre reinforced furan composites cured under microwave and thermal conditions
Unai Lopez de Vergara et al.
COMPOSITES PART B-ENGINEERING (2014)
Microwave-thermal technique for energy and time efficient curing of carbon fiber reinforced polymer prepreg composites
Sunil C. Joshi et al.
JOURNAL OF COMPOSITE MATERIALS (2014)
Curing of natural fibre-reinforced thermoplastic composites using microwave energy
Sabir Ali et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2014)
Development and characterisations of WC-12Co microwave clad
Sunny Zafar et al.
MATERIALS CHARACTERIZATION (2014)
A review of modeling and control during drilling of fiber reinforced plastic composites
Amrinder Pal Singh et al.
COMPOSITES PART B-ENGINEERING (2013)
Microwave Material Processing-A Review
S. Chandrasekaran et al.
AICHE JOURNAL (2012)
Joining of natural fiber reinforced composites using microwave energy: Experimental and finite element study
Pramendra Kumar Bajpai et al.
MATERIALS & DESIGN (2012)
Effect of heating mode and sintering temperature on the consolidation of 90W-7Ni-3Fe alloys
Avijit Mondal et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Experimental and theoretical investigation on microwave melting of metals
S. Chandrasekaran et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Effect of pretreatment of bagasse fibers on the properties of chitosan/microfibrillated cellulose nanocomposites
Mohammad L. Hassan et al.
JOURNAL OF MATERIALS SCIENCE (2011)
A new approach to joining of bulk copper using microwave energy
M. S. Srinath et al.
MATERIALS & DESIGN (2011)
A novel route for joining of austenitic stainless steel (SS-316) using microwave energy
M. S. Srinath et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2011)
Development and microstructural characterization of microwave cladding on austenitic stainless steel
Dheeraj Gupta et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Investigation on microstructural and mechanical properties of microwave processed dissimilar joints
M.S. Srinath et al.
Journal of Manufacturing Processes (2011)
Design principles of microwave applicators for small-scale process equipment
G. S. J. Sturm et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2010)
Microwave and ultrasonic processing: Now a realistic option for industry
Cristina Leonelli et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2010)
Microwave and conventional sintering of 90W-7Ni-3Cu alloys with premixed and prealloyed binder phase
Avijit Mondal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Effect of Porosity and Particle Size on Microwave Heating of Copper
A. Mondal et al.
SCIENCE OF SINTERING (2010)
Carbon nanotube composite curing through absorption of microwave radiation
Amanda L. Higginbotham et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Comparison of the mechanical and physical properties of a carbon fibre epoxy composite manufactured by resin transfer moulding using conventional and microwave heating
D. A. Papargyris et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Microwave assisted sintering of green metal parts
C. Leonelli et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Cure studies on bifunctional epoxy matrices using a domestic microwave oven
Sandhya Rao et al.
POLYMER TESTING (2008)
An evaluation of fracture toughness of vinyl ester composites cured under microwave conditions
H. Ku et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2007)
Fracture toughness of phenol formaldehyde composites post-cured in microwaves
F. Cardona et al.
JOURNAL OF ELECTROMAGNETIC WAVES AND APPLICATIONS (2007)
Thermal, morphological, and electrical characterization of microwave processed natural fiber composites
Nikki Sgriccia et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Extrusion and mechanical properties of highly filled cellulose fibre-polypropylene composites
Magnus Bengtsson et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Microwave sintering of W-Ni-Fe alloy
A. Upadhyaya et al.
SCRIPTA MATERIALIA (2007)
Recent developments in thermoset curing methods
JN Hay et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING (2006)
Sintering response of austenitic (316L) and ferritic (434L) stainless steel consolidated in conventional and microwave furnaces
SS Panda et al.
SCRIPTA MATERIALIA (2006)
Studies on mechanical behavior of microwave and thermally cured glass fiber reinforced polymer composites
PS Mooteri et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2006)
Structure-properties relationship of short jute fiber-reinforced polypropylene composites
H Cabral et al.
JOURNAL OF COMPOSITE MATERIALS (2005)
Polymeric composites for use in electronic and microwave devices
A Moulart et al.
POLYMER ENGINEERING AND SCIENCE (2004)
Microwave innovation for industrial composite fabrication - The HEPHAISTOS technology
LE Feher et al.
IEEE TRANSACTIONS ON PLASMA SCIENCE (2004)
Comparison between the thermal and microwave curing of bismaleimide resin
I Zainol et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
Natural fibres as reinforcement in polylactic acid (PLA) composites
K Oksman et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Microwave sintering of transparent alumina
JP Cheng et al.
MATERIALS LETTERS (2002)
Flexural and interlaminar shear strength properties of carbon fibre/epoxy composites cured thermally and with microwave radiation
C Nightingale et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
Microwave curing of an epoxy-amine system: effect of curing agent on the glass-transition temperature
FYC Boey et al.
POLYMER TESTING (2001)
Microwave and conventional curing of thick-section thermoset composite laminates: Experiment and simulation
ET Thostenson et al.
POLYMER COMPOSITES (2001)
Microwave processing of adhesive joints using a temperature controlled feedback system
A Olofinjana et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2001)
Processing materials with microwave energy
DE Clark et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
分享论文
