4.7 Article

Highly efficient thermal conductivity of polydimethylsiloxane composites via introducing Line-Plane-like hetero-structured fillers

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Polymer Science

Thermally Conductive Poly(lactic acid) Composites with Superior Electromagnetic Shielding Performances via 3D Printing Technology

Teng-Bo Ma et al.

Summary: This work presents a facile fabrication strategy for thermally conductive graphite nanosheets/poly(lactic acid) sheets with ordered GNPs via FDM 3D printing. Superior EMI SE and thermal conductivity were achieved by combining the o-GNPs/PLA with Ti3C2Tx films.

CHINESE JOURNAL OF POLYMER SCIENCE (2022)

Article Chemistry, Physical

Janus (BNNS/ANF)-(AgNWs/ANF) thermal conductivity composite films with superior electromagnetic interference shielding and Joule heating performances

Yixin Han et al.

Summary: In this study, Janus (BNNS/ANF)-(AgNWs/ANF) composite films were successfully prepared, which exhibited one side insulating, one side conducting performance. The composite films showed high thermal conductivity, superior electromagnetic interference shielding effectiveness, good mechanical properties, stable temperature-voltage response characteristics, and reliable electrical stability.

NANO RESEARCH (2022)

Article Nanoscience & Nanotechnology

Hierarchically Multifunctional Polyimide Composite Films with Strongly Enhanced Thermal Conductivity

Yongqiang Guo et al.

Summary: A hierarchically multifunctional polyimide composite film with high thermal conductivity and electromagnetic interference (EMI) shielding has been successfully fabricated through hierarchical design and assembly strategy.

NANO-MICRO LETTERS (2022)

Article Materials Science, Composites

Constructing Tanghulu-like Diamond@Silicon carbide nanowires for enhanced thermal conductivity of polymer composite

Yue Qin et al.

Summary: Polymer composites with high thermal conductivity are in high demand for electronic packaging fields due to their light weight, easy process, and high chemical resistance. The development of a novel hybrid filler structure, similar to a Tanghulu-like structure, has shown to significantly enhance thermal conductivity and heat transportation performance in the polymer composites, representing a promising strategy for future applications in electronic packaging.

COMPOSITES COMMUNICATIONS (2022)

Article Nanoscience & Nanotechnology

Synergistic enhanced thermal conductivity of polydimethylsiloxane composites via introducing SCF and hetero-structured GB@rGO hybrid fillers

Hao Zhang et al.

Summary: In this study, a short carbon fiber/glass bubble coated reduced graphite oxide/polydimethylsiloxane (SCF/GB@rGO/PDMS) composite with outstanding comprehensive performances was fabricated using spatial confining forced network assembly method (SCFNA). The composite exhibited high thermal conductivity, excellent electrical conductivity, and superior mechanical properties. In thermal interface material tests, the composite sample showed significantly higher heat transfer capacity compared to commercial thermal grease.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Article Materials Science, Composites

Flexible and insulating silicone rubber composites with sandwich structure for thermal management and electromagnetic interference shielding

Yongqiang Guo et al.

Summary: This work focuses on the development of CF@Fe2O3/(BN/SR) composites with excellent thermal conductivity, electromagnetic interference (EMI) shielding performance, and electrical insulation properties. The sandwich structure of CF@Fe2O3/(BN/SR) composites contributes to effective EMI shielding by absorption-reflection-reabsorption of electromagnetic waves, while BN/SR and CF@Fe2O3 layers enhance thermal conductivity and electrical insulation, respectively. The composites show higher performance in terms of thermal conductivity, EMI shielding effectiveness, volume resistance, and breakdown strength compared to conventional CF/(BN/SR) composites. The CF@Fe2O3/(BN/SR) composites also exhibit better cooling effect than commercial silicon grease in computer testing platforms, indicating promising applications in electronics.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Article Chemistry, Physical

In-situ growth of core-shell ZnFe2O4 @ porous hollow carbon microspheres as an efficient microwave absorber

Liang Chai et al.

Summary: ZnFe2O4@PHCMS composite material with excellent microwave absorption properties was successfully synthesized in this study, with a maximum adsorption capacity of -51.43 dB. Through mechanisms such as suitable impedance characteristic, dipole polarization, and interfacial polarization, effective electromagnetic wave absorption was achieved.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Review Chemistry, Physical

Mass production of two-dimensional materials beyond graphene and their applications

Liusi Yang et al.

Summary: 2D materials have wide applications in various fields, but large-scale, high-quality production is required for commercialization. While the production technology for graphene and its derivatives is relatively mature, other 2D materials are still in the early stages of mass production. This review summarizes the current high-yield preparation methods and application areas for 2D materials beyond graphene.

NANO RESEARCH (2021)

Article Nanoscience & Nanotechnology

Electrochemically Exfoliated Graphite Nanosheet Films for Electromagnetic Interference Shields

Ali Shayesteh Zeraati et al.

Summary: Electrochemical exfoliation of graphite is a highly efficient method to produce high-quality graphene materials. This study investigated the effectiveness of different exfoliation methods for graphite in developing graphene-based electromagnetic interference (EMI) shields with high electrical conductivity. The results showed that the use of certain electrolytes could lead to the production of thermally stable EEG films with excellent EMI performance, demonstrating the feasibility of using electrochemical exfoliation for high-performance EMI shields without the need for harsh chemicals or high temperatures.

ACS APPLIED NANO MATERIALS (2021)

Article Chemistry, Physical

Dual-functional graphene/carbon nanotubes thick film: Bidirectional thermal dissipation and electromagnetic shielding

Hui Jia et al.

Summary: A full-carbon dual-functional graphene/carbon nanotubes thick film with high heat flux was successfully prepared in this study, showing excellent thermal conductivity properties. After 2800 degrees C graphitization, C-C covalent bonds were formed between graphene sheets and CNTs, enhancing phonons transfer for thermal conduction. This new material holds great promise for spacecraft materials application.

CARBON (2021)

Article Materials Science, Composites

Boron nitride self-assembly cladding structure promoting thermal property and dimensional stability of polymer composites

Yue Lu et al.

Summary: By introducing highly reactive graphene oxide as a bridge, the surface treatment between boron nitride and polyolefin matrix is simplified; The modified PP/BN@RGO composites exhibit high thermal conductivity and lower thermal resistance, with excellent flame-retardant properties and stability.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Review Materials Science, Multidisciplinary

Rational design of two-dimensional nanofillers for polymer nanocomposites toward multifunctional applications

Xi Shen et al.

Summary: Nanocomposites of 2D nanostructured fillers embedded in a polymer matrix offer ample opportunities for designing multifunctional materials with exceptional properties. Rational assembly of various 2D materials with controlled structures enables the creation of composites with tailored properties for novel applications. Advanced synthesis and assembly techniques, along with multiscale structural characteristics, are key for developing composites with multifunctional properties across different scales for emerging applications.

PROGRESS IN MATERIALS SCIENCE (2021)

Article Chemistry, Physical

Optimization of thermoelectric properties of Al-doped Zn1-xAlxO under high pressure and high temperature

Qi Chen et al.

Summary: ZnO has excellent electrical properties, but excessive doping of Al can lead to the generation of a secondary phase that limits the further improvement of electrical properties. Adjusting the optical band gap and lattice parameters through high pressure synthesis can improve the electrical properties of the material and provide a new approach for enhancing the thermoelectric properties of ZnO.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Materials Science, Multidisciplinary

Effects of different hot pressing processes and NFC/GO/CNT composite proportions on the performance of conductive membranes

Haojie Zou et al.

Summary: In this study, NFC and GO were used as dispersant and binder to disperse and assemble CNT effectively. A conductive composite membrane with good conductivity, mechanical performance, and thermal stability was prepared by low-temperature hot pressing. The controllable method provides a new strategy to enhance performance of low-dimensional carbon composite membranes.

MATERIALS & DESIGN (2021)

Article Chemistry, Physical

Anchoring silicon on the basal plane of graphite via a three-phase heterostructure for highly reversible lithium storage

Yi Zhang et al.

Summary: The deposition of silicon nanoparticles on the basal plane of graphite nanosheets via magnesiothermic reduction creates a three-phase heterostructure with an interfacial 3C-SiC layer, leading to improved cycling performance and Coulombic efficiency of lithium-ion battery anodes. The strong bonding between silicon and graphite nanosheets through the interfacial 3C-SiC layer allows for maintaining electrical connection despite volume changes during cycling, resulting in high initial and stable Coulombic efficiency.

ENERGY STORAGE MATERIALS (2021)

Article Materials Science, Characterization & Testing

Improved thermal conductivity of poly(dimethylsiloxane) composites filled with well-aligned hybrid filler network of boron nitride and graphene oxide

Wondu Lee et al.

Summary: Polymer composites with low dielectric loss and high thermal conductivity were successfully fabricated by hybridizing reduced graphene oxide and boron nitride, sintering silver nanoparticles, and infiltrating poly(dimethylsiloxane). Aligned BN on the surface of graphene oxide achieved a well-ordered filler structure, leading to enhanced thermal conductivity.

POLYMER TESTING (2021)

Article Materials Science, Multidisciplinary

Synthesis, characterization and heat transfer study of reduced graphene oxide-Al2O3 nanocomposite based nanofluids: Investigation on thermal conductivity and rheology

Kamalnayan Singh et al.

Summary: In this study, the formation of rGO-Al2O3 nanocomposite was confirmed using various characterization techniques, and the thermal conductivity of the nanofluid was found to increase with temperature and concentration. The nanofluids exhibited non-Newtonian behavior, and showed promising results for convective heat transfer studies.

MATERIALS TODAY COMMUNICATIONS (2021)

Article Materials Science, Composites

The flexible film of SCF/BN/PDMS composites with high thermal conductivity and electrical insulation

Houbao Liu et al.

Summary: By adding short carbon fibers and boron nitride particles to the PDMS matrix, the thermal conductivity and electrical insulation of the flexible polymer composite films were significantly enhanced, showing excellent electrical insulation properties. The combination of SCF and BN particles constructed an effective thermal conduction path while inhibiting the formation of conductive paths, leading to a 990% enhancement in thermal conductivity compared to pure PDMS.

COMPOSITES COMMUNICATIONS (2021)

Article Nanoscience & Nanotechnology

Stretchable and Healable Conductive Elastomer Based on PEDOT:PSS/Natural Rubber for Self-Powered Temperature and Strain Sensing

Yan Yang et al.

Summary: Self-powered elastic conductors based on thermoelectric materials, such as PEDOT:PSS incorporated into natural rubber, show high electrical conductivity and good mechanical performance, with self-powered temperature- and tensile strain-sensing abilities. The unrecoverable strain and conductivity under cyclic tensile strain can be healed by water and PBS post-treatment, providing insights for preparing healed and stretchable self-powered electronic sensors.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Materials Science, Composites

Interfacial crosslinking for highly thermally conductive and mechanically strong boron nitride/aramid nanofiber composite film

Rui Mo et al.

Summary: By innovatively using the interfacial crosslinking approach, the performance of boron nitride nanosheets/carbon nanotubes composites was effectively enhanced, including improved thermal conductivity and mechanical properties.

COMPOSITES COMMUNICATIONS (2021)

Article Nanoscience & Nanotechnology

Breaking Through Bottlenecks for Thermally Conductive Polymer Composites: A Perspective for Intrinsic Thermal Conductivity, Interfacial Thermal Resistance and Theoretics

Junwei Gu et al.

Summary: This paper proposes three possible directions for breaking through the bottlenecks in thermally conductive polymer composites: preparing intrinsically thermally conductive polymers, reducing interfacial thermal resistance, and establishing suitable thermal conduction models and studying inner thermal conduction mechanism. The future development trends are expected to provide guidance for the preparation of thermally conductive polymers and their composites.

NANO-MICRO LETTERS (2021)

Article Materials Science, Composites

In-situ fabrication of hetero-structured fillers to significantly enhance thermal conductivities of silicone rubber composite films

Kunpeng Ruan et al.

Summary: Utilizing precipitation and high temperature calcination, hetero-structured fillers boron nitride nanosheets@alumina/silicone rubber composite films were fabricated with significantly improved thermal conductivity and excellent mechanical, insulation, and thermal properties.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Article Polymer Science

High thermal conductivity of self-healing polydimethylsiloxane elastomer composites by the orientation of boron nitride nano sheets

Zhihui Shang et al.

Summary: In this study, self-healing polydimethylsiloxane/boron nitride nano sheets (PDMS/BNNSs) composites with high thermal conductivity were prepared. With a 30 wt% BNNSs filler content, the thermal conductivity increased by 588%, and the self-healing efficiency exceeded 85%. Additionally, an enhancement of 275% in tensile strength and 31.8 degrees C in thermal stability was observed compared to pure self-healing PDMS elastomer.

POLYMERS FOR ADVANCED TECHNOLOGIES (2021)

Article Engineering, Electrical & Electronic

Highly thermally conductive carbon nanotubes pillared exfoliated graphite/polyimide composites

Yongqiang Guo et al.

Summary: In this study, carbon nanotubes pillared on exfoliated graphite by the microwave-assisted method are used as thermally conductive fillers in polyimide to fabricate composites with significantly improved thermal conductivity. The composites show high stability even after repeated heating and cooling cycles, and finite element analysis reveals the internal mechanism of the enhanced thermal conductivity. Actual application tests demonstrate the composite's capability to reduce the operating temperature of mobile phone CPUs.

NPJ FLEXIBLE ELECTRONICS (2021)

Article Nanoscience & Nanotechnology

Flexible multilayered MXene/thermoplastic polyurethane films with excellent electromagnetic interference shielding, thermal conductivity, and management performances

Qingsen Gao et al.

Summary: In this study, flexible multilayered MXene/thermoplastic polyurethane films were prepared via a simple layer-by-layer spraying technique, showing excellent EMI shielding effectiveness, high electrical conductivity, and outstanding thermal conductivity. The obtained films also demonstrated excellent heating stability, low voltage requirements, and fast response time, making them potential candidates for various applications including de-icing and thermal stealth performance.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Review Physics, Multidisciplinary

Size-dependent phononic thermal transport in low-dimensional nanomaterials

Zhongwei Zhang et al.

PHYSICS REPORTS-REVIEW SECTION OF PHYSICS LETTERS (2020)

Review Materials Science, Multidisciplinary

3D graphene and boron nitride structures for nanocomposites with tailored thermal conductivities: recent advances and perspectives

Xi Shen et al.

FUNCTIONAL COMPOSITES AND STRUCTURES (2020)

Article Nanoscience & Nanotechnology

Free-standing graphene films embedded in epoxy resin with enhanced thermal properties

Izaskun Bustero et al.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2020)

Article Materials Science, Multidisciplinary

The alkaline synthesizing method for improved thermal characteristics of CNT/alumina nanocomposite

Baasandulam Tserengombo et al.

DIAMOND AND RELATED MATERIALS (2020)

Article Materials Science, Composites

Enhanced thermal conductivity of polydimethylsiloxane composites with carbon fiber

Jinming Wei et al.

COMPOSITES COMMUNICATIONS (2020)

Article Nanoscience & Nanotechnology

Multifunctional Thermal Management Materials with Excellent Heat Dissipation and Generation Capability for Future Electronics

Chang-Ping Feng et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Materials Science, Composites

Poly(dimethylsiloxane)/Cu/Ag nanocomposites: Electrical, thermal, and mechanical properties

Shamim Aramesh et al.

POLYMER COMPOSITES (2019)

Article Materials Science, Composites

Boron nitride nanosheets endow the traditional dielectric polymer composites with advanced thermal management capability

Dexiao Zou et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Article Engineering, Manufacturing

Coupling hybrid of BN nanosheets and carbon nanotubes to enhance the mechanical and tribological properties of fabric composites

Junya Yuan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Article Materials Science, Multidisciplinary

Silica coating onto graphene for improving thermal conductivity and electrical insulation of graphene/polydimethylsiloxane nanocomposites

Chaoxuan Shen et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Article Nanoscience & Nanotechnology

Preparation of high-performance cellulose composite membranes from LiOH/urea solvent system

Yinke Liu et al.

NANOCOMPOSITES (2019)

Article Engineering, Manufacturing

Paving thermally conductive highway by 3D interconnected framework of carbon nanotube and graphene oxide in poly(vinylidene fluoride)

Min Cao et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

Article Nanoscience & Nanotechnology

Silver Nanowires with Pristine Graphene Oxidation Barriers for Stable and High Performance Transparent Conductive Films

Faisal Alotaibi et al.

ACS APPLIED NANO MATERIALS (2018)

Article Engineering, Manufacturing

Hexagonal boron nitride/polymethyl-vinyl siloxane rubber dielectric thermally conductive composites with ideal thermal stabilities

Junwei Gu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

Article Materials Science, Composites

Dense graphene foam and hexagonal boron nitride filled PDMS composites with high thermal conductivity and breakdown strength

Haoming Fang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2017)

Article Nanoscience & Nanotechnology

Three-Dimensional Graphene Foam-Filled Elastomer Composites with High Thermal and Mechanical Properties

Haoming Fang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Engineering, Multidisciplinary

Synergic enhancement of thermal properties of polymer composites by graphene foam and carbon black

Yun-Hong Zhao et al.

COMPOSITES PART B-ENGINEERING (2016)

Article Chemistry, Physical

Electrospun Polyimide Nanocomposite Fibers Reinforced with Core-Shell Fe-FeO Nanoparticles

Jiahua Zhu et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2010)