相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。A fully-discrete peridynamic modeling approach for tensile fracture of fiber-reinforced cementitious composites
Yong Zhang et al.
ENGINEERING FRACTURE MECHANICS (2021)
Experimental investigation on bearing behavior and failure mechanism of double-lap thin-ply composite bolted joints
Yuejie Cao et al.
COMPOSITE STRUCTURES (2021)
Damage tolerance of CFRP airframe bolted joints in bearing, following bolt pull-through failure
Ioannis K. Giannopoulos et al.
COMPOSITES PART B-ENGINEERING (2020)
Experimental study and DEM modelling of bolted composite lap joints subjected to tension
Min Yu et al.
COMPOSITES PART B-ENGINEERING (2020)
Damage progression and failure of single-lap thin-ply laminated composite bolted joints under quasi-static loading
Yuejie Cao et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Novel finite element for near real-time design decisions in multi-fastener composite bolted joints under various loading rates
P. A. Sharos et al.
COMPOSITE STRUCTURES (2020)
Failure analysis of single lap composite laminate bolted joints: Comparison of experimental and numerical tests
Benoit Montagne et al.
COMPOSITE STRUCTURES (2020)
Tension failure analysis for bolted joints using a closed-form stress solution
M. Nguyen-Hoang et al.
COMPOSITE STRUCTURES (2020)
Failure mechanisms in NCF composite bolted joints: Experiments and FE model
Anton Shipsha et al.
COMPOSITES PART B-ENGINEERING (2020)
A novel double-spring analytical model for hybrid GLARE joints: Model development, validation, parameter study and global sensitivity analysis
Peifei Xu et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
The investigation of viscoelastic mechanical behaviors of bolted GLARE joints: Modeling and experiments
Peifei Xu et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
A numerical and experimental study on the multiple fracture progression of CFRP T-joints under pull-off load
Xueshi Ma et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Is the Bouligand architecture tougher than regular cross-ply laminates? A discrete element method study
J. William Pro et al.
EXTREME MECHANICS LETTERS (2020)
Progressive failure modelling of double-lap of composite bolted joints based on Puck's criterion
Song Zhou et al.
ENGINEERING FRACTURE MECHANICS (2019)
Experimental verification of a progressive damage model for composite pinned joints with different clearances
U. A. Khashaba et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Mesoscale modelling of damage in single- and double-shear composite bolted joints
Fujian Zhuang et al.
COMPOSITE STRUCTURES (2019)
On the progressive failure simulation and experimental validation of fiber metal laminate bolted joints
Christian Gerendt et al.
COMPOSITE STRUCTURES (2019)
A novel material degradation model for unidirectional CFRP composites
Libin Zhao et al.
COMPOSITES PART B-ENGINEERING (2018)
Bearing failure of single-/double-shear composite bolted joints: An explicit finite element modeling
Fangzhou Lu et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2018)
Progressive damage and failure analysis of single lap shear and double lap shear bolted joints
Ashith P. K. Joseph et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
A bi-material property based FE modelling method for progressive damage analyses of composite double-lap bolted joints
Meijuan Shan et al.
RESULTS IN PHYSICS (2018)
Coupled continuum damage mechanics and failure envelope method for failure prediction of composite multi-bolt joints
Boling He et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2017)
A consistent anisotropic damage model for laminated fiber-reinforced composites using the 3D-version of the Puck failure criterion
J. Reinoso et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)
Effects of bolt torque tightening on the strength and fatigue life of airframe FRP laminate bolted joints
Ioannis K. Giannopoulos et al.
COMPOSITES PART B-ENGINEERING (2017)
A micromechanics-based degradation model for composite progressive damage analysis
Jianyu Zhang et al.
JOURNAL OF COMPOSITE MATERIALS (2016)
Progressive damage analysis of PFRP double-lap bolted joints using explicit finite element method
Ao Du et al.
COMPOSITE STRUCTURES (2016)
Modeling damages and cracks growth in composite with a 3D discrete element method
B. D. Le et al.
COMPOSITES PART B-ENGINEERING (2016)
Secondary bending effects in progressively damaged single-lap, single-bolt composite joints
Libin Zhao et al.
Results in Physics (2016)
Quasi-static bearing failure of CFRP composite in biaxially loaded bolted joints
Zlatan Kapidzic et al.
COMPOSITE STRUCTURES (2015)
A novel predictive model for mechanical behavior of single-lap GFRP composite bolted joint under static and dynamic loading
Panding Wang et al.
COMPOSITES PART B-ENGINEERING (2015)
Influence of end distances on the failure of composite bolted joints
Jianyu Zhang et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)
A progressive damage analysis based characteristic length method for multi-bolt composite joints
Jianyu Zhang et al.
COMPOSITE STRUCTURES (2014)
Modelling bearing failure in countersunk composite joints under quasi-static loading using 3D explicit finite element analysis
B. Egan et al.
COMPOSITE STRUCTURES (2014)
An analytical model for strength prediction in multi-bolt composite joints at various loading rates
P. A. Sharos et al.
COMPOSITE STRUCTURES (2014)
Fastener effects on mechanical behaviors of double-lap composite joints
Tianliang Qin et al.
COMPOSITE STRUCTURES (2013)
Experimental and numerical investigation on bolted composite joint made by vacuum assisted resin injection
Song Zhou et al.
COMPOSITES PART B-ENGINEERING (2013)
Modified maximum stress failure criterion for composite π joints
Libin Zhao et al.
JOURNAL OF COMPOSITE MATERIALS (2013)
Stress analysis of single-bolt, single-lap, countersunk composite joints with variable bolt-hole clearance
B. Egan et al.
COMPOSITE STRUCTURES (2012)
A progressive failure model for mesh-size-independent FE analysis of composite laminates subject to low-velocity impact damage
L. Raimondo et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2012)
Numerical analysis of intralaminar failure mechanisms in composite structures. Part I: FE implementation
B. G. Falzon et al.
COMPOSITE STRUCTURES (2011)
Numerical analysis of intralaminar failure mechanisms in composite structures. Part II: Applications
B. G. Falzon et al.
COMPOSITE STRUCTURES (2011)
An analytical model for the prediction of load distribution in highly torqued multi-bolt composite joints
C. T. McCarthy et al.
COMPOSITE STRUCTURES (2011)
Experimental Investigation of Dynamically Loaded Bolted Joints in Carbon Fibre Composite Structures
Garth M. Pearce et al.
APPLIED COMPOSITE MATERIALS (2010)
Progressive damage analysis of composite bolted joints with liquid shim layers using constant and continuous degradation models
C. Huehne et al.
COMPOSITE STRUCTURES (2010)
Mechanics of mechanically fastened joints in polymer-matrix composite structures - A review
Srinivasa D. Thoppul et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Review of Degradation Models for Progressive Failure Analysis of Fiber Reinforced Polymer Composites
Mark R. Garnich et al.
Applied Mechanics Reviews (2008)
Finite element modeling and optimization of load transfer in multi-fastener joints using structural elements
Johan Ekh et al.
COMPOSITE STRUCTURES (2008)
A continuum damage model for composite laminates:: Part I -: Constitutive model
P. Maimi et al.
MECHANICS OF MATERIALS (2007)
An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models
A. Turon et al.
ENGINEERING FRACTURE MECHANICS (2007)
Progressive damage modeling in fiber-reinforced materials
Ireneusz Lapczyk et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
A design methodology for mechanically fastened joints in laminated composite materials
P. P. Camanho et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
A simple method for determining the effects of bolt-hole clearance on load distribution in single-column multi-bolt composite joints
MA McCarthy et al.
COMPOSITE STRUCTURES (2006)
Physically-based failure models and criteria for laminated fibre-reinforced composites with emphasis on fibre kinking: Part I: Development
ST Pinho et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Bearing strength and failure behavior of bolted composite joints (part I: Experimental investigation)
Y Xiao et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
An experimental study of bolt-hole clearance effects in single-lap, multibolt composite joints
MA McCarthy et al.
JOURNAL OF COMPOSITE MATERIALS (2005)
Failure criteria for FRP laminates
CG Davila et al.
JOURNAL OF COMPOSITE MATERIALS (2005)
Probabilistic deformation and strength prediction for a filament wound pressure vessel
TK Hwang et al.
COMPOSITES PART B-ENGINEERING (2003)
Numerical simulation of mixed-mode progressive delamination in composite materials
PP Camanho et al.
JOURNAL OF COMPOSITE MATERIALS (2003)
The response of composite joints with bolt-clamping loads, Part 1: Model development
HT Sun et al.
JOURNAL OF COMPOSITE MATERIALS (2002)
Nonlinear analysis of fiber-reinforced composite laminates subjected to uniaxial tensile load
WP Lin et al.
JOURNAL OF COMPOSITE MATERIALS (2002)
Parametric study on the failure of fiber-reinforced composite laminates under biaxial tensile load
WP Lin et al.
JOURNAL OF COMPOSITE MATERIALS (2002)
Failure analysis of FRP laminates by means of physically based phenomenological models
A Puck et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2002)
Strength prediction of bolted joints in graphite/epoxy composite laminates
KI Tserpes et al.
COMPOSITES PART B-ENGINEERING (2002)
A three-dimensional progressive damage model for bolted joints in composite laminates subjected to tensile loading
KI Tserpes et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2001)
On damage development in mechanically fastened composite laminates
T Ireman et al.
COMPOSITE STRUCTURES (2000)
分享论文
