4.6 Article

A simple approach for fabrication of superhydrophobic titanium surface with self-cleaning and bouncing properties

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Polymer Science

Fabrication of superhydrophobic and self cleaning PVA-silica fiber coating on 304L SS surfaces by electrospinning

Sampathkumar Chrisolite Vanithakumari et al.

Summary: A superhydrophobic coating with self-cleaning property was fabricated on 304L SS samples using a simple one-step electrospinning process, followed by silane treatment. The coating exhibited dynamic bouncing of water droplets and excellent self-cleaning performance, while maintaining its surface properties in chloride solutions with different ionic strengths and pH levels.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Article Chemistry, Physical

Large-area surface wettability patterning of metal alloys via a maskless laser-assisted functionalization method

Avik Samanta et al.

Summary: An innovative laser-assisted functionalization method is proposed to fabricate a superhydrophobic-superhydrophilic patterned surface on a large-area metal alloy, with two different strategies demonstrated. Adjusting laser parameters allows for surface topography patterning and anti-reflection surface properties to be achieved. This method decouples extreme wettability from surface topography, showing simplicity, robustness, and feasibility.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

Facile fabrication of robust, biomimetic and superhydrophobic polymer/ graphene-based coatings with self-cleaning, oil-water separation, anti-icing and corrosion resistance properties

Zaihang Zheng et al.

Summary: A versatile, robust superhydrophobic polymer/graphene-based coatings have been successfully prepared, demonstrating self-cleaning, oil-water separation, anti-icing, and corrosion resistance properties. The coatings exhibit superhydrophobic effect and good mechanical strength, heat resistance, and chemical stability.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Article Chemistry, Physical

Design of mechanical robust superhydrophobic Cu coatings with excellent corrosion resistance and self-cleaning performance inspired by lotus leaf

Jianfei Yang et al.

Summary: This study successfully prepared three hierarchical superhydrophobic Cu coatings with excellent self-cleaning, mechanical robustness, and corrosion resistance using a simple method. Additionally, a hydrophobic mechanism suitable for worn superhydrophobic surfaces was proposed, along with the influence of microstructure size on wettability.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Article Materials Science, Multidisciplinary

Formation mechanism and hemocompatibility of the superhydrophobic surface on biomedical Ti-6Al-4V alloy

J. Chen et al.

Summary: The superhydrophobic surface prepared through hydrothermal treatment and subsequent hydrophobic treatment significantly improves the hemocompatibility of biomedical Ti-6Al-4V alloy, showing decreased hemolysis ratio and platelet adhesion, as well as prolonged dynamic coagulation time.

JOURNAL OF MATERIALS SCIENCE (2021)

Article Materials Science, Coatings & Films

Optimal condition for preparing TiO2 superhydrophobic surfaces on titanium substrate in NH4F/H3PO4 electrolyte by anodization and its self-cleaning effect and anti-icing ability

Gen-Xiang Xiang et al.

Summary: Superhydrophobic surface materials were successfully achieved on metallic substrates using a two-step method, involving the fabrication of micro/nano-cone or flower-like structures and modification with stearic acid. The optimized surface showed maximum contact angle and minimal sliding angle, indicating excellent superhydrophobic properties.

SURFACE & COATINGS TECHNOLOGY (2021)

Article Chemistry, Physical

A compound of ZnO/PDMS with photocatalytic, self-cleaning and antibacterial properties prepared via two-step method

Tinglan Wang et al.

Summary: The study synthesized ZnO/PDMS composites by electrodeposition-grafting modification method and investigated the effects of process parameters on the composite structure and properties. The results demonstrated that samples prepared under optimal conditions exhibited superhydrophobicity and excellent photocatalytic performance.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

Corrosion resistance of a superhydrophobic dodecyltrimethoxysilane coating on magnesium hydroxide-pretreated magnesium alloy AZ31 by electrodeposition

Sheng-Jian Zhang et al.

Summary: The study successfully fabricated a fluorine-free superhydrophobic Mg(OH)2/DTMS composite coating with excellent corrosion resistance and superhydrophobicity. The coating was composed of walnut-like micro/nanostructures, demonstrating a high contact angle and low sliding angle, and exhibited significantly improved corrosion resistance compared to uncoated substrate.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Article Chemistry, Physical

Superhydrophobic LDH/TTOS composite surface based on microstructure for the anti-corrosion, anti-fouling and oil-water separation application

Yuxin Xiang et al.

Summary: A two-step method was used to fabricate a superhydrophobic surface on steel sheet, nickel foam (NF), and stainless steel mesh (SS). The micro-nano structure of Layer Double Hydroxide (LDH) is obtained by hydrothermal method. The results show that the prepared superhydrophobic surface can achieve a corrosion inhibition rate of 96.3% and has great potential in the fields of anti-corrosion, anti-fouling, and oil-water separation.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Article Chemistry, Physical

Facile and environmentally-friendly fabrication of underwater superaerophobic and superaerophilic metallic surfaces through laser ablation and heat treatment

Xinyi Li et al.

Summary: This study developed a facile and environmentally-friendly method to fabricate underwater superaerophobic and superaerophilic metallic surfaces through laser ablation and low-temperature heat treatment. These surfaces do not require low-surface-energy reagents and can be used to control the passage of underwater bubbles.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Article Chemistry, Physical

Icing delay of sessile water droplets on superhydrophobic titanium alloy surfaces

Chunfang Guo et al.

Summary: The research fabricated superhydrophobic surfaces on titanium alloy through laser processing and chemical modification, and investigated their effect on icing behaviors. Results showed that droplet icing was significantly delayed on the superhydrophobic titanium alloy surfaces, presenting potential applications in anti-icing technology.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Article Chemistry, Physical

SiO2 nanoparticle-containing superhydrophobic materials with enhanced durability via facile and scalable spray method

Xiaofeng Yu et al.

Summary: The study utilized a scalable two-step spraying method to fabricate various superhydrophobic materials with excellent durability and mechanical stability. Even after long exposure in harsh environments, the materials maintained their superhydrophobicity and showed outstanding oil absorption and releasing performance.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Review Chemistry, Physical

Superhydrophobic Surfaces: Insights from Theory and Experiment

Sumit Parvate et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2020)

Article Multidisciplinary Sciences

When and how self-cleaning of superhydrophobic surfaces works

Florian Geyer et al.

SCIENCE ADVANCES (2020)

Article Engineering, Chemical

Roll-to roll initiated chemical vapor deposition of super hydrophobic thin films on large-scale flexible substrates

Huseyin Sakalak et al.

CHEMICAL ENGINEERING SCIENCE (2020)

Article Electrochemistry

Electrophoretic Deposition of Superhydrophobic Al/Fe2O3 Nanothermite with Long-Term Storage Stability

Haibing Zhang et al.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2020)

Article Chemistry, Physical

Effect of stearic acid as a low cost and green material on the self-cleaning and anti-corrosion behavior of anodized titanium

Masoud Mirzadeh et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2019)

Article Engineering, Chemical

Novel Robust Superhydrophobic Coating with Self-Cleaning Properties in Air and Oil Based on Rare Earth Metal Oxide

Liji Xiao et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)

Article Materials Science, Coatings & Films

Robust coating with superhydrophobic and self-cleaning properties in either air or oil based on natural zeolite

Weiguo Zeng et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Article Chemistry, Physical

Robust superhydrophobic TiO2@fabrics for UV shielding, self-cleaning and oil-water separation

J. Y. Huang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Review Chemistry, Multidisciplinary

Bio-Inspired Titanium Dioxide Materials with Special Wettability and Their Applications

Kesong Liu et al.

CHEMICAL REVIEWS (2014)

Article Chemistry, Physical

Controllable fabrication of superhydrophobic TiO2 coating with improved transparency and thermostability

Yanfen Wang et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2014)

Article Nanoscience & Nanotechnology

Controllable Stearic Acid Crystal Induced High Hydrophobicity on Cellulose Film Surface

Meng He et al.

ACS APPLIED MATERIALS & INTERFACES (2013)

Review Materials Science, Multidisciplinary

A review of growth mechanism, structure and crystallinity of anodized TiO2 nanotubes

D. Regonini et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2013)

Article Chemistry, Multidisciplinary

Facet Effect of Single-Crystalline Ag3PO4 Sub-microcrystals on Photocatalytic Properties

Yingpu Bi et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)

Article Electrochemistry

Effect of the solvent on growth of titania nanotubes prepared by anodization of Ti in HCl

Fathy M. B. Hassan et al.

ELECTROCHIMICA ACTA (2010)

Article Multidisciplinary Sciences

The rose petal effect and the modes of superhydrophobicity

Bharat Bhushan et al.

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2010)

Article Chemistry, Physical

A Novel Method for Synthesis of Titania Nanotube Powders using Rapid Breakdown Anodization

Narges F. Fahim et al.

CHEMISTRY OF MATERIALS (2009)

Article Electrochemistry

Rapid anodic growth of TiO2 and WO3 nanotubes in fluoride free electrolytes

R. Hahn et al.

ELECTROCHEMISTRY COMMUNICATIONS (2007)

Article Chemistry, Physical

Sodium stearate adsorption onto titania pigment

HA Capelle et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2003)

Article Physics, Multidisciplinary

Water spring:: A model for bouncing drops

K Okumura et al.

EUROPHYSICS LETTERS (2003)

Article Materials Science, Multidisciplinary

On the stability of thin-anodic-oxide films of titanium in acid phosphoric media

CE Marino et al.

CORROSION SCIENCE (2001)

Article Engineering, Biomedical

The electrochemical oxide growth behaviour on titanium in acid and alkaline electrolytes

YT Sul et al.

MEDICAL ENGINEERING & PHYSICS (2001)