相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Artificial neural networking (ANN) analysis for heat and entropy generation in flow of non-Newtonian fluid between two rotating disks
Tie-Hong Zhao et al.
MATHEMATICAL METHODS IN THE APPLIED SCIENCES (2023)
Predicting the Ultimate Axial Capacity of Uniaxially Loaded CFST Columns Using Multiphysics Artificial Intelligence
Sangeen Khan et al.
MATERIALS (2022)
Simulation of Depth of Wear of Eco-Friendly Concrete Using Machine Learning Based Computational Approaches
Mohsin Ali Khan et al.
MATERIALS (2022)
Predictive modeling for sustainable high-performance concrete from industrial wastes: A comparison and optimization of models using ensemble learners
Furqan Farooq et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Determining the contribution of environmental factors in controlling dust pollution during cold and warm months of western Iran using different data mining algorithms and game theory
Zohre Ebrahimi-Khusfi et al.
ECOLOGICAL INDICATORS (2021)
Prediction of Catenary Action Capacity of RC Beam-Column Substructures under a Missing Column Scenario Using Evolutionary Algorithm
Iftikhar Azim et al.
KSCE JOURNAL OF CIVIL ENGINEERING (2021)
Application of Gene Expression Programming (GEP) for the Prediction of Compressive Strength of Geopolymer Concrete
Mohsin Ali Khan et al.
MATERIALS (2021)
Compressive Strength of Fly-Ash-Based Geopolymer Concrete by Gene Expression Programming and Random Forest
Mohsin Ali Khan et al.
ADVANCES IN CIVIL ENGINEERING (2021)
Improving daily stochastic stream flow prediction: comparison of novel hybrid data-mining algorithms
Khabat Khosravi et al.
HYDROLOGICAL SCIENCES JOURNAL-JOURNAL DES SCIENCES HYDROLOGIQUES (2021)
Modeling Renewable Energy Systems by a Self-Evolving Nonlinear Consequent Part Recurrent Type-2 Fuzzy System for Power Prediction
Jafar Tavoosi et al.
SUSTAINABILITY (2021)
Experimental Evaluation of Untreated and Pretreated Crumb Rubber Used in Concrete
Hamad Hassan Awan et al.
CRYSTALS (2021)
Geopolymer Concrete Compressive Strength via Artificial Neural Network, Adaptive Neuro Fuzzy Interface System, and Gene Expression Programming With K-Fold Cross Validation
Mohsin Ali Khan et al.
FRONTIERS IN MATERIALS (2021)
Sustainable use of fly-ash: Use of gene-expression programming (GEP) and multi-expression programming (MEP) for forecasting the compressive strength geopolymer concrete
Hong-Hu Chu et al.
AIN SHAMS ENGINEERING JOURNAL (2021)
Predictive modeling of swell-strength of expansive soils using artificial intelligence approaches: ANN, ANFIS and GEP
Fazal E. Jalal et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2021)
Preparation Methods for Graphene Metal and Polymer Based Composites for EMI Shielding Materials: State of the Art Review of the Conventional and Machine Learning Methods
Saba Ayub et al.
METALS (2021)
Predicting the compaction characteristics of expansive soils using two genetic programming-based algorithms
Fazal E. Jalal et al.
TRANSPORTATION GEOTECHNICS (2021)
Predicting the compressive strength of normal and High-Performance Concretes using ANN and ANFIS hybridized with Grey Wolf Optimizer
Emadaldin Mohammadi Golafshani et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
COMPRESSIVE STRENGTH PREDICTION OF LIGHTWEIGHT SHORT COLUMNS AT ELEVATED TEMPERATURE USING GENE EXPRESSION PROGRAMING AND ARTIFICIAL NEURAL NETWORK
Ahmad Ashteyat et al.
JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT (2020)
Prediction of mechanical properties of green concrete incorporating waste foundry sand based on gene expression programming
Muhammad Farjad Iqbal et al.
JOURNAL OF HAZARDOUS MATERIALS (2020)
Experimental Investigation of Hybrid Carbon Nanotubes and Graphite Nanoplatelets on Rheology, Shrinkage, Mechanical, and Microstructure of SCCM
Furqan Farooq et al.
MATERIALS (2020)
Generation Expansion Planning in the Presence of Wind Power Plants Using a Genetic Algorithm Model
Ali Sahragard et al.
ELECTRONICS (2020)
Toward intelligent construction: Prediction of mechanical properties of manufactured-sand concrete using tree-based models
Junfei Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Predicting and Mapping of Soil Organic Carbon Using Machine Learning Algorithms in Northern Iran
Mostafa Emadi et al.
REMOTE SENSING (2020)
Comparative Analysis of Machine Learning Models for Nanofluids Viscosity Assessment
Mohammadhadi Shateri et al.
NANOMATERIALS (2020)
A Comparative Study of Random Forest and Genetic Engineering Programming for the Prediction of Compressive Strength of High Strength Concrete (HSC)
Furqan Farooq et al.
APPLIED SCIENCES-BASEL (2020)
New Prediction Model for the Ultimate Axial Capacity of Concrete-Filled Steel Tubes: An Evolutionary Approach
Muhammad Faisal Javed et al.
CRYSTALS (2020)
Applications of Gene Expression Programming and Regression Techniques for Estimating Compressive Strength of Bagasse Ash based Concrete
Muhammad Faisal Javed et al.
CRYSTALS (2020)
Applications of Gene Expression Programming for Estimating Compressive Strength of High-Strength Concrete
Fahid Aslam et al.
ADVANCES IN CIVIL ENGINEERING (2020)
Development of Crumb Rubber Concrete for Practical Application in the Residential Construction Sector - Design and Processing
Osama Youssf et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Creep and drying shrinkage behaviour of crumb rubber concrete (CRC)
Danda Li et al.
AUSTRALIAN JOURNAL OF CIVIL ENGINEERING (2020)
Effect of cement strength class on the prediction of compressive strength of cement mortar using GEP method
Sahar Mahdinia et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Estimating Daily Dew Point Temperature Using Machine Learning Algorithms
Sultan Noman Qasem et al.
WATER (2019)
Prediction model on compressive strength of recycled aggregate concrete filled steel tube columns
Abdikarim Idiris Nour et al.
COMPOSITES PART B-ENGINEERING (2019)
Experimental investigation of mechanical properties of crumbed rubber concrete containing natural zeolite
Farnoosh Jokar et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Durability characteristics of lightweight rubberized concrete
Thong M. Pham et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Deep neural network with high-order neuron for the prediction of foamed concrete strength
Tuan Nguyen et al.
COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING (2019)
Prediction of the Strength of Rubberized Concrete by an Evolved Random Forest Model
Yuantian Sun et al.
ADVANCES IN CIVIL ENGINEERING (2019)
Prediction of Compression Index of Fine-Grained Soils Using a Gene Expression Programming Model
Danial S. Mohammadzadeh et al.
INFRASTRUCTURES (2019)
Effects of surface treatments of recycled tyre crumb on cement-rubber bonding in concrete composite foam
Alireza Kashani et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Compressive strength prediction of recycled concrete based on deep learning
Fangming Deng et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Optimizing asphalt mix design process using artificial neural network and genetic algorithm
Haissam Sebaaly et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Mechanical performance of roller compacted concrete pavement containing crumb rubber and nano silica
Bashar S. Mohammed et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Application of soft computing methods for predicting the elastic modulus of recycled aggregate concrete
Emadaldin Mohammadi Golafshani et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Prediction of compressive strength of self-compacting concrete by ANFIS models
Behnam Vakhshouri et al.
NEUROCOMPUTING (2018)
ANN and GEP prediction for simultaneous effect of nano and micro silica on the compressive and flexural strength of cement mortar
Mohammad Azimi-Pour et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Artificial neural network based modelling approach for strength prediction of concrete incorporating agricultural and construction wastes
Mulusew Aderaw Getahun et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Predicting the compressive strength of silica fume concrete using hybrid artificial neural network with multi-objective grey wolves
Ali Behnood et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Predicting the ingredients of self compacting concrete using artificial neural network
Mahmoud Abu Yaman et al.
ALEXANDRIA ENGINEERING JOURNAL (2017)
New prediction models for concrete ultimate strength under true-triaxial stress states: An evolutionary approach
Saeed K. Babanajad et al.
ADVANCES IN ENGINEERING SOFTWARE (2017)
Lightweight concrete design using gene expression programing
Saeed Jafari et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
New formulations for mechanical properties of recycled aggregate concrete using gene expression programming
Aliakbar Gholampour et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Enhancing mechanical performance of rubberised concrete pavements with sodium hydroxide treatment
Iman Mohammadi et al.
MATERIALS AND STRUCTURES (2016)
Assessment of the mechanical performance of crumb rubber concrete
Osama Youssf et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
The effect of waste rubber particles and silica fume on the mechanical properties of Roller Compacted Concrete Pavement
Mansour Fakhri et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Evaluation of empirical models for predicting monthly mean horizontal diffuse solar radiation
Milan Despotovic et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Assessment of artificial neural network and genetic programming as predictive tools
Amir H. Gandomi et al.
ADVANCES IN ENGINEERING SOFTWARE (2015)
Surface modified used rubber tyre aggregates: effect on recycled concrete performance
Haolin Su et al.
MAGAZINE OF CONCRETE RESEARCH (2015)
Experimental Investigation of Crumb Rubber Concrete Columns under Seismic Loading
Osama Youssf et al.
STRUCTURES (2015)
PREDICITION OF COMPRESSIVE STRENGTH IN LIGHT-WEIGHT SELF-COMPACTING CONCRETE BY ANFIS ANALYTICAL MODEL
B. Vakhsouri et al.
ARCHIVES OF CIVIL ENGINEERING (2015)
An experimental investigation of crumb rubber concrete confined by fibre reinforced polymer tubes
Osama Youssf et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Effect of Rubber Particle Modification on Properties of Rubberized Concrete
Zhang Haibo et al.
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2014)
Experimental Study on the Effect of Different Pretreatment Methods on Rubber Concrete Work Performance and Compressive Strength
Qun Yu et al.
SUSTAINABLE DEVELOPMENT OF URBAN AND RURAL AREAS (2014)
Experimental Study on the Mechanical Properties of the Crumb Rubber Concrete Modified By Silane Coupling Agent
Wei Li et al.
ADVANCED CONSTRUCTION TECHNOLOGIES (2014)
Rubber modified concrete improved by chemically active coating and silane coupling agent
Qiao Dong et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Modeling compressive strength of EPS lightweight concrete using regression, neural network and ANFIS
A. Sadrmomtazi et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Rubberized concrete: A green structural material with enhanced energy-dissipation capability
James Xue et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
A two-staged surface treatment to improve properties of rubber modified cement composites
Baoshan Huang et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Modeling the compressive strength of geopolymeric binders by gene expression programming-GEP
Ali Nazari et al.
EXPERT SYSTEMS WITH APPLICATIONS (2013)
Crumb rubber aggregate coatings/pre-treatments and their effects on interfacial bonding, air entrapment and fracture toughness in self-compacting rubberised concrete (SCRC)
Khalid Battal Najim et al.
MATERIALS AND STRUCTURES (2013)
An evolutionary approach for modeling of shear strength of RC deep beams
Amir Hossein Gandomi et al.
MATERIALS AND STRUCTURES (2013)
Properties and durability of concrete containing polymeric wastes (tyre rubber and polyethylene terephthalate bottles): An overview
F. Pacheco-Torgal et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Gene expression programming based formulations for splitting tensile strength of concrete
Fatih Ozcan
CONSTRUCTION AND BUILDING MATERIALS (2012)
Study of impact performance of rubber reinforced concrete
Feng Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Lightweight concrete production with low Portland cement consumption
Fernando Pelisser et al.
JOURNAL OF CLEANER PRODUCTION (2012)
Novel Approach to Strength Modeling of Concrete under Triaxial Compression
Amir Hossein Gandomi et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2012)
Concrete made with recycled tire rubber: Effect of alkaline activation and silica fume addition
Fernando Pelisser et al.
JOURNAL OF CLEANER PRODUCTION (2011)
Optimizing the Prediction Accuracy of Concrete Compressive Strength Based on a Comparison of Data-Mining Techniques
Jui-Sheng Chou et al.
JOURNAL OF COMPUTING IN CIVIL ENGINEERING (2011)
Nonlinear Genetic-Based Models for Prediction of Flow Number of Asphalt Mixtures
Amir Hossein Gandomi et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2011)
A review of the fresh/hardened properties and applications for plain- (PRC) and self-compacting rubberised concrete (SCRC)
K. B. Najim et al.
CONSTRUCTION AND BUILDING MATERIALS (2010)
Genetic programming approach for prediction of compressive strength of concretes containing rice husk ash
Mustafa Saridemir
CONSTRUCTION AND BUILDING MATERIALS (2010)
Scrap-tyre-rubber replacement for aggregate and filler in concrete
Eshmaiel Ganjian et al.
CONSTRUCTION AND BUILDING MATERIALS (2009)
On some aspects of variable selection for partial least squares regression models
Partha Pratim Roy et al.
QSAR & COMBINATORIAL SCIENCE (2008)
Strength development and chloride penetration in rubberized concretes with and without silica fume
Mehmet Gesoglu et al.
MATERIALS AND STRUCTURES (2007)
Durability of rubberized mortar and concrete
Ilker Bekir Topcu et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2007)
Use of waste rubber as concrete additive
Liang Hsing Chou et al.
WASTE MANAGEMENT & RESEARCH (2007)
Potential of rubber aggregates to modify properties of cement based-mortars: Improvement in cracking shrinkage resistance
A. Turatsinze et al.
CONSTRUCTION AND BUILDING MATERIALS (2007)
Predicting the compressive strength and slump of high strength concrete using neural network
Ahmet Oztas et al.
CONSTRUCTION AND BUILDING MATERIALS (2006)
Tyre rubber waste recycling in self-compacting concrete
MC Bignozzi et al.
CEMENT AND CONCRETE RESEARCH (2006)
Influence of scrap rubber addition to Portland I concrete composites:: Destructive and non-destructive testing
C Albano et al.
COMPOSITE STRUCTURES (2005)
Mechanical characterisation of cement-based mortar incorporating rubber aggregates from recycled worn tyres
A Turatsinze et al.
BUILDING AND ENVIRONMENT (2005)
Development of waste tire modified concrete
GQ Li et al.
CEMENT AND CONCRETE RESEARCH (2004)
Static and dynamic behaviour of recycled tyre rubber-filled concrete
F Hernández-Olivares et al.
CEMENT AND CONCRETE RESEARCH (2002)
Beware of q(2)!
A Golbraikh et al.
JOURNAL OF MOLECULAR GRAPHICS & MODELLING (2002)
Use of tire rubber particles as addition to cement paste
N Segre et al.
CEMENT AND CONCRETE RESEARCH (2000)
分享论文
