☆ 4.7 Article

Phase engineering reinforced multiple loss network in apple tree-like liquid metal/Ni-Ni3P/N-doped carbon fiber composites for high-performance microwave absorption

CHEMICAL ENGINEERING JOURNAL (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Achieving Super Broadband Electromagnetic Absorption by Optimizing Impedance Match of rGO Sponge Metamaterials

Xianxian Sun et al.

Summary: The study presents metamaterials based on reduced graphene oxide (rGO) sponges with frustum pyramid shapes, which exhibit excellent electromagnetic absorption performance in the range of 2-40 GHz, showing ultrabroad band and high absorption rate. These metamaterials demonstrate outstanding impedance matching and strong dielectric loss, making them highly promising for broadband electromagnetic protection applications.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

A hierarchical Co @ mesoporous C/macroporous C sheet composite derived from bimetallic MOF and oroxylum indicum for enhanced microwave absorption

Xiang Zhang et al.

Summary: Biomass-derived carbon absorbing materials have attracted extensive attention due to their diverse structures, wide sources, and low cost. However, constructing efficient biomass-based absorbers with hierarchical and multi-component micro-nanoarchitecture remains a great challenge. In this study, a novel Co@mesoporous C/macroporous C sheet hybrid was successfully prepared, which exhibited a unique 3D micro-nanostructure with larger specific surface area, rich heterogeneous interfaces, massive defects, and multi-level porosity.

CARBON (2022)

添加到收藏夹

Article Engineering, Environmental

CoFe2O4/porous carbon nanosheet composites for broadband microwave absorption

Renxin Xu et al.

Summary: An ultralight magnetic-carbon hybrid material was designed to achieve superior microwave absorption performances through self-assembly and compositional control, offering new insights for designing highly effective microwave absorbers.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Physical

Recent progress in biomass-derived carbonaceous composites for enhanced microwave absorption

Rong Qiang et al.

Summary: Recent advances in designing carbonaceous materials for electromagnetic absorption have shown promising results, with a focus on biomass categories and synthetic methods. The three-dimensional interconnected network of carbon materials, as well as the microwave absorption performance of corresponding composites, are highlighted in these studies. Nature fiber-derived carbon materials with high-aspect ratio fiber structure are also explored for potential applications in flexible cloaking fabric.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Liquid metal derived MOF functionalized nanoarrays with ultra-wideband electromagnetic absorption

Xianfei Zhang et al.

Summary: Low melting point liquid metal alloys are increasingly being utilized for their unique physicochemical properties, particularly in the synthesis of two-dimensional materials and electromagnetic wave absorption. These synthesis methods provide a versatile approach to prepare materials with different morphologies and excellent electromagnetic wave interaction properties.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mixed-dimensional hierarchical configuration of 2D Ni2P nanosheets anchored on 1D silk-derived carbon fiber for extraordinary electromagnetic wave absorption

Fei Pan et al.

Summary: This study successfully synthesized an electromagnetic wave absorbing material with two-dimensional nanosheets anchored on one-dimensional silk-derived carbon fiber. The material exhibited excellent EMW absorption performance, which can be attributed to the vertical growth and cross-linking of the nanosheets, as well as the multiple loss mechanisms in the composite.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Chemistry, Physical

Self-assembly of nano/microstructured 2D Ti3CNTx MXene-based composites for electromagnetic pollution elimination and Joule energy conversion application

Zhen Xiang et al.

Summary: In this study, multifunctional nano/microstructured 2D Ti3CNTx MXene-based composites were constructed using a controlled self-assembly strategy for efficient electromagnetic attenuation and Joule energy conversion application. The optimized nanocomposites exhibited high-performance electromagnetic wave absorption, electromagnetic shielding, favorable flame-retardant properties, and high infrared shielding versatility.

CARBON (2022)

添加到收藏夹

Article Chemistry, Physical

Co@N-doped double-shell hollow carbon via self-templating-polymerization strategy for microwave absorption

Linling Xu et al.

Summary: Metal-organic frameworks (MOFs) derivatives have been extensively studied as efficient electromagnetic absorbing materials. A Co@N-doped porous carbon composite with double-shell hollow structures was developed through self-templating polymerization and subsequent pyrolysis, providing a promising approach for designing hollow MOFs derivatives.

CARBON (2022)

添加到收藏夹

Article Engineering, Environmental

Polarization loss-enhanced honeycomb-like MoS2 nanoflowers/undaria pinnatifida-derived porous carbon composites with high-efficient electromagnetic wave absorption

Jie Cheng et al.

Summary: This study successfully fabricates spherical MoS2 nanoflowers/undaria pinnatifida-derived honeycomb-like porous carbon composites, which are easy to prepare, sustainable, and low-cost electromagnetic absorbing materials with super absorption capacity. The unique microstructure and porosity of the composites facilitate multiple scattering and reflections, as well as the construction of interconnected conducting networks, greatly enhancing the electromagnetic wave absorption capacity. These hybrids have potential applications as sustainable electromagnetic wave absorbers.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-performance microwave absorption enabled by Co3O4 modified VB-group laminated VS2 with frequency modulation from S-band to Ku-band

Zehao Huang et al.

Summary: Hierarchical heterostructures based on VB-group laminated vanadium disulfide nanosheets embedded with cobalt tetroxide nanoparticles were constructed, which showed strong electromagnetic coupling and enhanced microwave absorption performance.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Porous Ni Foams Filled by N-Doped Carbon Nanotubes Coated with N-Doped Ni3P and Ni Nanoparticles for Catalytic Water Splitting

Bowen Lu et al.

Summary: This study successfully developed a bifunctional catalyst with high efficiency and stability for overall water splitting through rational design. The self-supported electrode exhibited superior electrocatalytic performance, achieving low overpotential for hydrogen and oxygen evolution reactions and requiring a low cell voltage for overall water splitting in a KOH electrolyte.

ACS APPLIED NANO MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Liquid Metal-Derived Two-Dimensional Layered Double Oxide Nanoplatelet-Based Coatings for Electromagnetic Wave Absorption

Xianfei Zhang et al.

Summary: This study explores the synthesis of highly electrostatically polarized two-dimensional aluminum hydroxides as adsorption sites for various divalent cations. By changing synthesis conditions, different orientations of 2D Al/NiCo-LDO nanoplatelets can be achieved, resulting in excellent electromagnetic wave absorption performance. The results demonstrate the tunable and excellent electromagnetic wave absorption capabilities of the developed 2D AI/NiCo-LDOs for potential applications in electromagnetic protection and absorption.

ACS APPLIED NANO MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Intumescent fire-retardant coatings for ancient wooden architectures with ideal electromagnetic interference shielding

Chaobo Liang et al.

Summary: The use of wood in construction and electronics poses fire hazards due to its flammability. Intumescent flame retardant coatings, using MPP and GNP, significantly improve the flame retardancy, heat resistance, and EMI shielding of coatings, with potential applications in various fields.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mace-like carbon fiber/ZnO nanorod composite derived from Typha orientalis for lightweight and high-efficient electromagnetic wave absorber

Yanyan Dong et al.

Summary: This research successfully constructed carbon fiber/zinc oxide nanorod composite using sustainable biomass Typha orientalis as a template, achieving enhanced electromagnetic wave absorption performance. The new material shows outstanding absorption properties and has potential applications in the future.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Nanocellulose nanocomposite aerogel towards efficient oil and organic solvent adsorption

Hongbo Gu et al.

Summary: This study improved the hydrophobic properties and adsorption capacity of nanocellulose aerogel by incorporating nanochitosan and reduced graphene oxide, resulting in a nanocomposite aerogel with excellent porous microstructures and adsorption capacities. This aerogel showed potential for efficient removal of oil from wastewater and organic solvent adsorption.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Dual-acting cellulose nanocomposites filled with carbon nanotubes and zeolitic imidazolate framework-67 (ZIF-67)-derived polyhedral porous Co3O4 for symmetric supercapacitors

Keqi Qu et al.

Summary: By integrating nanocellulose as a green binder with conductive materials, natural material cellulose has been more efficiently used in energy storage applications. Embedding carbon nanotubes in porous Co3O4 derived from zeolitic imidazolate framework-67 has effectively enhanced the conductivity and morphology of the composites.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

A green and high-yield route to recycle waste masks into CNTs/Ni hybrids via catalytic carbonization and their application for superior microwave absorption

Ronghua Yu et al.

Summary: A green and high-yield route has been developed to recycle waste masks into CNTs/Ni hybrids with superior microwave absorption capabilities. The mechanism of the as-fabricated hybrids was mainly attributed to the synergistic effects of CNTs and Ni on conduction and magnetic losses, polarization, and impedance matching, providing a scalable and cost-effective strategy for recycling waste masks into valuable carbon nanomaterials.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

添加到收藏夹

Article Chemistry, Physical

A hierarchical carbon Fiber@MXene@ZnO core-sheath synergistic microstructure for efficient microwave absorption and photothermal conversion

Xiaopeng Han et al.

Summary: The continuous 3D hierarchical construction method has been proven to be an effective way to prepare high-efficiency microwave absorption composites. A novel hierarchical carbon fiber @MXene@ZnO core-sheath structure with tunable and efficient microwave absorption performance has been successfully synthesized through a self-assembly and hydrothermal process. The composite material exhibits excellent microwave absorption and photothermal properties, providing a new strategy for designing safe and wearable devices.

CARBON (2021)

添加到收藏夹

Article Engineering, Environmental

Fire-retardant and thermal insulating honeycomb-like NiS2/SnS2 nanosheets @ 3D porous carbon hybrids for high-efficiency electromagnetic wave absorption

Yanyan Dong et al.

Summary: Inspired by nature, popcorn-derived honeycomb-like NiS2/SnS2 nanosheets @ 3D porous carbon hybrids were fabricated through hydrothermal and carbonization methods. These materials exhibit outstanding electromagnetic wave absorption performance and multifunctionality, enabling practical stealth applications in harsh environments.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Engineering, Environmental

Aramid nanofiber assisted preparation of self-standing liquid metal-based films for ultrahigh electromagnetic interference shielding

Fu-Wen Huang et al.

Summary: This research successfully designed a self-standing LM/ANF film with remarkable electrical conductivity, achieving a high EMI shielding effectiveness at a mere thickness. Additionally, the LM/ANF film demonstrated excellent reliability and superior thermostability even after folding cycles and thermal treatment.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Engineering, Environmental

Core-shell heterostructured nanofibers consisting of Fe7S8 nanoparticles embedded into S-doped carbon nanoshells for superior electromagnetic wave absorption

Yang Huang et al.

Summary: In this study, a core-shell fibrous nanocomposite was developed using cellulose-assisted ferric deposition and in-situ wrapping, which can dissipate electromagnetic waves through multiple-interfacial polarization and sulfur dipolar polarization. Additionally, the nano-sized Fe7S8 particles exposed extensive magnetic domains for magnetic resonance to further consume electromagnetic energy. The resulting composites exhibited low reflection loss and broad effective absorption frequency range.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Lotus Leaf-Derived Gradient Hierarchical Porous C/MoS2 Morphology Genetic Composites with Wideband and Tunable Electromagnetic Absorption Performance

Fei Pan et al.

Summary: Lotus leaf-derived gradient hierarchical porous C/MoS2 morphology genetic composites were successfully fabricated with excellent electromagnetic absorption performance. A brand-new dielectric sum-quotient model was proposed to analyze the electromagnetic performance of the non-magnetic material system. By considering the dielectric constant and specific sum and quotient of permittivity, suitable materials with designable electromagnetic absorption performance could be sought through material genetic engineering.

NANO-MICRO LETTERS (2021)

添加到收藏夹

Article Chemistry, Physical

Biomass-derived 3D magnetic porous carbon fibers with a helical/chiral structure toward superior microwave absorption

Fei Wu et al.

Summary: A catalytic self-deposition (CSD) strategy was proposed to fabricate 3D magnetic porous carbon fibers with a complex structure, which exhibited remarkable microwave absorption properties. The unique structure and composition of the fibers resulted in exceptional performance in terms of minimum reflection loss and effective absorption bandwidth, showing potential for the economical preparation of advanced microwave absorption materials.

CARBON (2021)

添加到收藏夹

Article Chemistry, Physical

Self-assembled MoS2/3D worm-like expanded graphite hybrids for high-efficiency microwave absorption

Zhicheng Liu et al.

Summary: In this work, 3D worm-like expanded graphite/2D MoS2 nanosheets hybrids were successfully synthesized through a hydrothermal process, demonstrating excellent electromagnetic wave absorption performance. The MoS2/EG hybrids showed efficient wave absorption capability and an ultra-low filling ratio in the study.

CARBON (2021)

添加到收藏夹

Article Materials Science, Composites

Simultaneously improved mechanical and electromagnetic interference shielding properties of carbon fiber fabrics/epoxy composites via interface engineering

Shu Zhu et al.

Summary: By using electroless plating and dopamine self-polymerization, the electrical conductivity and strength of carbon fiber reinforced composites were successfully improved, enhancing the interactions between fibers and epoxy matrix. The introduction of dopamine altered the fracture mechanisms of the composites, leading to an enhancement in EMI shielding effectiveness.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Hollow C@MoS2 Nanospheres for Microwave Absorption

Linling Xu et al.

Summary: The engineering of core-shell nanostructures offers great potential for enhancing interface polarization relaxation and optimizing impedance matching. The development of core-shell-structured MHCS@MoS2 nanospheres demonstrates promising high-performance electromagnetic microwave absorption capabilities through effective reduction of EMW reflection. By controlling the thickness of MoS2 shells and the graphitization of MHCS cores, efficient and broadband absorption bandwidth can be achieved.

ACS APPLIED NANO MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Lightweight Fe3C@Fe/C nanocomposites derived from wasted cornstalks with high-efficiency microwave absorption and ultrathin thickness

Guangyu Qi et al.

Summary: Carbon materials have great potential in producing microwave absorbers, with Fe3C@Fe/C composites obtained from wasted cornstalks showing excellent absorption capabilities. The credit for this lies in the impedance matching and attenuation properties of the composites, as well as the synergistic influence of dielectric and magnetic losses in the porous microstructure. A low-cost method using agricultural waste is proposed to reduce pollution caused by burning cornstalks.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Enhanced Microwave Absorbing Ability of Carbon Fibers with Embedded FeCo/CoFe2O4 Nanoparticles

Jiabin Chen et al.

Summary: FeCo/CoFe2O4/carbon nanofiber composites were successfully prepared by electrospinning for effective electromagnetic wave attenuation, achieving a bandwidth of 5.0 GHz and an absorption peak of -52.3 dB at a thickness of 1.95 mm. Additionally, the composite coatings demonstrated significant radar cross section reduction and scattering ability to electromagnetic waves when analyzed using ANSYS Electronics Desktop 2018(HFSS).

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Physical

Electrostatic self-assembly construction of 2D MoS2 wrapped hollow Fe3O4 nanoflowers@1D carbon tube hybrids for self-cleaning highperformance microwave absorbers

Xiang Zhang et al.

Summary: Recent research has shown an urgent need for high-performance microwave absorbers to tackle electromagnetic pollution. By constructing heterostructure materials through stacking low dimensional materials, superior microwave absorption performance can be achieved.

CARBON (2021)

添加到收藏夹

Article Chemistry, Physical

Magnetic Fe3S4 LTMCs micro-flowers@ wax gourd aerogel-derived carbon hybrids as efficient and sustainable electromagnetic absorber

Fei Pan et al.

Summary: Magnetic Fe3S4 LTMCs micro-flowers@ wax gourd aerogel-derived carbon composites exhibit superior electromagnetic absorption properties and potential radar wave absorption effects in practical applications.

CARBON (2021)

添加到收藏夹

Article Chemistry, Physical

Morphology-controllable synthesis of polyurethane-derived highly cross-linked 3D networks for multifunctional and efficient electromagnetic wave absorption

Xiaojie Zhu et al.

Summary: This research focused on the morphology modulation of multi-level structures and multifunctional design of composites for electromagnetic wave absorption. By utilizing abandoned polyurethane as sacrificial template, Fe/Fe2O3@porous carbon composites with highly cross-linked 3D structures were synthesized, showing excellent absorption performance attributed to a three-dimensional magnetic conductive network. The materials not only exhibited superior impedance matching and dual-loss mechanisms, but also possessed multiple functionalities such as low density, excellent mechanical properties, and high thermal management capabilities.

CARBON (2021)

添加到收藏夹

Article Chemistry, Physical

Partially contacted NixSy@N, S-codoped carbon yolk-shelled structures for efficient microwave absorption

Bei Li et al.

Summary: The study presents a non-standard yolk-shelled nanostructure, n-NixSy@NSC, with excellent microwave absorption performance, achieving minimal reflection loss in optimal conditions. Experimental results and calculations attribute its enhanced performance to increased electrical conductivity and improved impedance matching feature.

CARBON (2021)

添加到收藏夹

Article Engineering, Environmental

Honeycomb-like NiCo2O4@MnO2 nanosheets array/3D porous expanded graphite hybrids for high-performance microwave absorber with hydrophobic and flame-retardant functions

Xiang Zhang et al.

Summary: This study successfully developed a multifunctional NiCo2O4@MnO2/EG nanosheets array microwave absorber, showing excellent microwave absorption, hydrophobicity, and flame resistance properties. The material achieved better performance through the synergistic effect of multiple heterointerfaces, opening up new prospects for developing novel microwave absorbers to meet practical application needs.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Single Zinc Atoms Anchored on MOF-Derived N-Doped Carbon Shell Cooperated with Magnetic Core as an Ultrawideband Microwave Absorber

Mengqiu Huang et al.

Summary: By employing a single atom-doping strategy to adjust local electric potential in the metal-organic framework (MOF)-derived carbon shell, a unique magnetic-dielectric synergy system is constructed in the core-shell Fe3O4@Zn-N-Carbon microspheres, leading to enhanced microwave absorption performance.

SMALL (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Flexible and Waterproof 2D/1D/0D Construction of MXene-Based Nanocomposites for Electromagnetic Wave Absorption, EMI Shielding, and Photothermal Conversion

Zhen Xiang et al.

Summary: An electrostatic assembly approach was used to fabricate Ti3C2Tx/CNTs/Co nanocomposites, showcasing outstanding electromagnetic wave absorption, EMI shielding, and photothermal conversion performance, making them highly promising for the next-generation intelligent electromagnetic attenuation system.

NANO-MICRO LETTERS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Interface Engineered Microcellular Magnetic Conductive Polyurethane Nanocomposite Foams for Electromagnetic Interference Shielding

Guolong Sang et al.

Summary: Lightweight microcellular polyurethane/ carbon nanotubes/nickel-coated CNTs/phase separation polymerizable ionic liquid copolymer composite foams prepared by non-solvent induced phase separation have high electromagnetic shielding effectiveness. Regulation of microcellular structure, conductive network, and microcellular size can enhance the reflection of electromagnetic waves and improve the shielding effectiveness.

NANO-MICRO LETTERS (2021)

添加到收藏夹

Article Materials Science, Composites

Covalent organic framework-derived hollow core-shell Fe/Fe3O4@porous carbon composites with corrosion resistance for lightweight and efficient microwave absorption

Xiaojie Zhu et al.

Summary: This study successfully synthesized hollow core-shell Fe/Fe3O4@porous carbon composites with excellent electromagnetic wave absorption properties. The composite inherits the porous structure and high specific surface area of COF material, facilitating multiple reflections and scattering of electromagnetic waves to improve impedance matching and demonstrate efficient electromagnetic absorption performance at ultra-thin matching thickness.

COMPOSITES COMMUNICATIONS (2021)

添加到收藏夹

Article Chemistry, Physical

Anchoring porous carbon nanoparticles on carbon nanotubes as a high-performance composite with a unique core-sheath structure for electromagnetic pollution precaution

Honghong Zhao et al.

Summary: The article introduces a method to improve the electromagnetic performance of carbon/carbon composites by growing ZIF-8 nanocrystals on the surface of CNTs and converting them into PCNs/CNTs composites. By adjusting the content of PCNs and CNTs, excellent EM absorption performance can be achieved, which is significant for enhancing MAMs.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Article Chemistry, Physical

Enhanced electromagnetic wave absorption of magnetic Co nanoparticles/CNTs/EG porous composites with waterproof, flame-retardant and thermal management functions

Zhen Xiang et al.

Summary: The study demonstrated the high-performance electromagnetic absorption characteristics of magnetic cobalt nanoparticles suspended in carbon nanotubes/expanded graphite porous composites. The well-designed multi-component structure endowed the composites with enhanced absorption performance, achieving high reflection loss, ultrathin thickness, wide absorption bandwidth, and low filler loading.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Tunable positive magnetoresistance of magnetic polyaniline nanocomposites

Jiang Guo et al.

Summary: The tunable positive magnetoresistance of polyaniline (PANI) nanocomposites with different magnetic nanoparticles was achieved through surface-initiated polymerization (SIP). The coated magnetic nanoparticles on PANI surface were confirmed by various characterizations. The effects of magnetic field and magnetic nanoparticles on charge carrier behavior were studied, showing decreased localization length and hopping length with increasing magnetic field, and increased density of state at the Fermi level.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Intense nonlinear dielectric and magnetic resonances of core-shell Ni@graphene composites and their improved microwave absorption properties†

Ying Liu et al.

Summary: Rational design of microstructure in core-shell metal particle@graphene heterostructures leads to a high-efficiency Ni@graphene microwave absorber. By controlling the microstructure of graphene shells rather than changing the thickness of the absorbent, the microwave absorption frequency can be adjusted, offering an effective strategy to synthesize attenuation materials with intrinsic narrowband resonance at microwave frequencies.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

添加到收藏夹

Article Chemistry, Physical

Rationally designed hierarchical N-doped carbon nanotubes wrapping waxberry-like Ni@C microspheres for efficient microwave absorption

Dawei Liu et al.

Summary: Hierarchical microstructures, specifically the double-hierarchical N-doped carbon nanotubes wrapping waxberry-like Ni@C microspheres, have been successfully designed and fabricated with optimal absorption characteristics in high-performance microwave absorbing materials. The unique architecture of NC@NCNTs provides stronger dipole orientation, interfacial polarization relaxation, conductive loss, and multiple reflection effects for incident electromagnetic waves, demonstrating superior performance compared to previous Ni/C composites.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Layer-by-layer assembled free-standing and flexible nanocellulose/porous Co3O4 polyhedron hybrid film as supercapacitor electrodes

Lidong Xiao et al.

Summary: Dual-layer films of free-standing nanocellulose/ZIF-67 derived porous Co3O4 polyhedrons were successfully assembled using a water-based paper-making process. Nanocellulose served as a flexible substrate and reduced the cost by replacing expensive polymer binders, while the NFC/porous Co3O4 polyhedron composite layer acted as a free-standing electrode with higher capacitance and power density. The hybrid film showed good flexibility and foldability with increasing NFC content, providing insights into flexible and free-standing supercapacitor electrodes derived from MOF-derived metal oxide powders.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Hierarchically porous Co/C nanocomposites for ultralight high-performance microwave absorption

Peitao Xie et al.

Summary: This study prepared Co/C nanocomposites with Co nanoparticles uniformly distributed in amorphous carbon sheets, achieving excellent absorption performance through hierarchical porous microstructures. Excellent absorption performance was achieved at 10% and 15% Co/C content levels, providing a new pathway for designing ultralight absorbers.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent progress of microwave absorption microspheres by magnetic-dielectric synergy

Lei Wang et al.

Summary: The research focus is on magnetic-dielectric MA materials due to their unique functions and synergy loss mechanism, covering important research progress, functional materials, development challenges, and design principles.

NANOSCALE (2021)

添加到收藏夹

Article Engineering, Environmental

Microwave-assisted fabrication of sea cucumber-like hollow structured composite for high-performance electromagnetic wave absorption

Ahmed Elhassan et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Novel Conductive Core-Shell Particle Based on Liquid Metal for Fabricating Real-Time Self-Repairing Flexible Circuits

Rongmin Zheng et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Ni-Ni3P nanoparticles embedded into N, P-doped carbon on 3D graphene frameworks via in situ phosphatization of saccharomycetes with multifunctional electrodes for electrocatalytic hydrogen production and anodic degradation

Guixiang Li et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Sandwich-Like Fe&TiO2@C Nanocomposites Derived from MXene/Fe-MOFs Hybrids for Electromagnetic Absorption

Baiwen Deng et al.

NANO-MICRO LETTERS (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Graphene and MXene Nanomaterials: Toward High-Performance Electromagnetic Wave Absorption in Gigahertz Band Range

Qiang Song et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Applied

Ultra-fast heat dissipating aerogels derived from polyaniline anchored cellulose nanofibers as sustainable microwave absorbers

Avinash R. Pai et al.

CARBOHYDRATE POLYMERS (2020)

添加到收藏夹

Article Chemistry, Physical

Rational construction of hierarchical accordion-like Ni@porous carbon nanocomposites derived from metal-organic frameworks with enhanced microwave absorption

Zhen Xiang et al.

CARBON (2020)

添加到收藏夹

Article Chemistry, Physical

Core-shell Ni@C encapsulated by N-doped carbon derived from nickel-organic polymer coordination composites with enhanced microwave absorption

Panbo Liu et al.

CARBON (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Constructing Ni12P5/Ni2P Heterostructures to Boost Interfacial Polarization for Enhanced Microwave Absorption Performance

Lei-Lei Liang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Stretchable Liquid Metal-Based Conductive Textile for Electromagnetic Interference Shielding

Li-Chuan Jia et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Physical

Enhanced electromagnetic wave absorption of nanoporous Fe3O4 @ carbon composites derived from metal-organic frameworks

Zhen Xiang et al.

CARBON (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Electromagnetic Response and Energy Conversion for Functions and Devices in Low-Dimensional Materials

Mao-Sheng Cao et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Layered NiCo alloy nanoparticles/nanoporous carbon composites derived from bimetallic MOFs with enhanced electromagnetic wave absorption performance

Juan Xiong et al.

CARBON (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Pea-like Fe/Fe3C Nanoparticles Embedded in Nitrogen-Doped Carbon Nanotubes with Tunable Dielectric/Magnetic Loss and Efficient Electromagnetic Absorption

Zhan Xu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Cactus-Inspired Bimetallic Metal-Organic Framework-Derived 1D-2D Hierarchical Co/N-Decorated Carbon Architecture toward Enhanced Electromagnetic Wave Absorbing Performance

Xueqing Xu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Interface Modulating CNTs@PANi Hybrids by Controlled Unzipping of the Walls of CNTs To Achieve Tunable High-Performance Microwave Absorption

Huagao Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synthesis of Magnetic Wood with Excellent and Tunable Electromagnetic Wave-Absorbing Properties by a Facile Vacuum/Pressure Impregnation Method

Zhichao Lou et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

添加到收藏夹

Article Chemistry, Physical

Ultra-light h-BCN architectures derived from new organic monomers with tunable electromagnetic wave absorption

Tao Zhang et al.

CARBON (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Bio- gel derived nickel/ carbon nanocomposites with enhanced microwave absorption

Peitao Xie et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Preparation of Polyaniline@MoS2@Fe3O4 Nanowires with a Wide Band and Small Thickness toward Enhancement in Microwave Absorption

Weidong Zhang et al.

ACS APPLIED NANO MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Effective modulation of electromagnetic characteristics by composition and size in expanded graphite/Fe3O4 nanoring composites with high Snoek's limit

Yanting Zhao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

In Situ Growth of Core-Sheath Heterostructural SiC Nanowire Arrays on Carbon Fibers and Enhanced Electromagnetic Wave Absorption Performance

Liwen Yan et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Chemistry, Physical

Preparation of Ag-coated hollow microspheres via electroless plating for application in lightweight microwave absorbers

Wook-Joong Kim et al.

APPLIED SURFACE SCIENCE (2015)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.