4.7 Article

Single-Crystalline Ni-Rich layered cathodes with Super-Stable cycling

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Environmental

A novel low-cobalt long-life LiNi0.88Co0.06Mn0.03Al0.03O2 cathode material for lithium ion batteries

Xiong Song et al.

Summary: By utilizing a two-step modification involving zirconium doping and LiBO2 coating, a novel quaternary low-cobalt LiNi0.88Co0.06Mn0.03Al0.03O2 cathode material (NCMA-ZB) was designed and synthesized, showing significantly improved long-term cycling performance, voltage fading, high-temperature performance, and safety performance. The modified cathode also demonstrated enhanced structural stability during cell cycling, with an increased thermal decomposition temperature by 8 degrees Celsius. The coin cells assembled with the NCMA-ZB cathodes exhibited excellent discharge specific capacity and capacity retention after cycling, showing promising potential for use in high-performance lithium ion batteries.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Materials Science, Multidisciplinary

TiO2-coated LiNi0.9Co0.08Al0.02O2 cathode materials with enhanced cycle performance for Li-ion batteries

Wei-Wei Li et al.

Summary: In this study, spherical LiNi0.9Co0.08Al0.02O2 powders with 0.4 wt% TiO2 coating layer were prepared by impregnation-hydrolysis method. The TiO2 coating layer effectively improved the cycling performance and stability of the electrode at a high discharge ratio.

RARE METALS (2021)

Article Chemistry, Multidisciplinary

Mg-Pillared LiCoO2: Towards Stable Cycling at 4.6 V

Yangyang Huang et al.

Summary: Mg-pillared LiCoO2, doped with Mg ions to prevent unfavorable phase transitions at high voltages, exhibits high capacity and enhanced cycling stability compared to pristine LiCoO2.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Applied

Suppressing irreversible phase transition and enhancing electrochemical performance of Ni-rich layered cathode LiNi0.9Co0.05Mn0.05O2 by fluorine substitution

Qi-Qi Qiu et al.

Summary: The electrochemical performance of Ni-rich layered oxide can be significantly improved by appropriate F substitution, reducing cation mixing, stabilizing crystal structure, and enhancing Li ion transport kinetics. The newly developed LiNi0.9Co0.05Mn0.05O1.99F0.01 cathode exhibits high capacity and excellent cycle stability.

JOURNAL OF ENERGY CHEMISTRY (2021)

Article Energy & Fuels

Reactive boride infusion stabilizes Ni-rich cathodes for lithium-ion batteries

Moonsu Yoon et al.

Summary: The use of engineered polycrystalline electrodes in lithium-ion batteries is crucial for cycling stability and safety, but achieving high-quality coatings at both the primary and secondary particle levels can be challenging. A coating-and-infusion approach using cobalt boride metallic glass on a Ni-rich layered cathode has been shown to significantly enhance performance, including rate capability and cycling stability under various conditions. The success of this approach is attributed to the simultaneous suppression of microstructural degradation and side reactions, as well as the critical role of strong selective interfacial bonding in ensuring uniform reactive wetting and facilitating infusion.

NATURE ENERGY (2021)

Review Chemistry, Physical

Fundamental and solutions of microcrack in Ni-rich layered oxide cathode materials of lithium-ion batteries

Shouyi Yin et al.

Summary: This review discusses the challenges and solutions of modifying Ni-rich layered cathodes specifically for microcrack failure, including mechanisms of microcrack formation and evolution, recent advances in stabilizing the structure/interface of Ni-rich cathodes, and strategies to mitigate microcracks and improve electrochemical performance. Additionally, outlook and perspectives for practical application of Ni-rich layered cathodes in electric vehicles are provided.

NANO ENERGY (2021)

Article Chemistry, Physical

A perspective on single-crystal layered oxide cathodes for lithium-ion batteries

Jayse Langdon et al.

Summary: The increasing demand for lithium-ion batteries calls for higher energy density and longer cycle life. Single-crystal cathode particles have attracted intense interest due to their remarkable cyclability, but there has been no systematic analysis of the different techniques in this field thus far.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Physical

Capacity Fading Mechanisms in Ni-Rich Single-Crystal NCM Cathodes

Hoon-Hee Ryu et al.

Summary: The study found that despite the high resistance to microcracking, the electrochemical performance of single-crystal NCM cathodes is inferior to polycrystalline NCM cathodes in terms of capacity and cycling stability. During cycling, the lithium concentrations in single-crystal NCM cathodes become spatially inhomogeneous, leading to the coexistence of phases with different unit cell dimensions within a single particle, which affects lithium ion diffusion and causes rapid capacity fading.

ACS ENERGY LETTERS (2021)

Article Chemistry, Multidisciplinary

Perspective on solid-electrolyte interphase regulation for lithium metal batteries

Mingguang Wu et al.

Summary: This article summarizes the recent progress in regulating the nature and composition of the SEI to stabilize the Li metal in LMBs, as well as discussing the formation mechanism and properties of the SEI. Strategies for constructing a stable SEI, such as designing compatible electrolytes with the anode and regulating nonfaradaic electric adsorption and desorption progress, are also summarized in this perspective.

SMARTMAT (2021)

Review Chemistry, Multidisciplinary

Reducing cobalt from lithium-ion batteries for the electric vehicle era

Hoon-Hee Ryu et al.

Summary: The increase in global sales of electric vehicles is attributed to high energy-density lithium-ion batteries, with a focus on reducing the use of cobalt in cathodes. A comparison of different cathode types in terms of performance and cost efficiency is made to evaluate their commercial viability for future electric vehicles, highlighting the challenges and strategies for developing advanced cathodes.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Review Materials Science, Multidisciplinary

Atomic-scale structural evolution of electrode materials in Li-ion batteries: a review

Yi-Ru Ji et al.

RARE METALS (2020)

Article Chemistry, Physical

New Class of Ni-Rich Cathode Materials Li[NixCoyB1-x-y]O2 for Next Lithium Batteries

Hoon-Hee Ryu et al.

ADVANCED ENERGY MATERIALS (2020)

Article Nanoscience & Nanotechnology

Bifunctional Surface Coating of LiNbO3 on High-Ni Layered Cathode Materials for Lithium-Ion Batteries

Jong Hwa Kim et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Multidisciplinary

Pseudo-Bonding and Electric-Field Harmony for Li-Rich Mn-Based Oxide Cathode

Jun Chen et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Review Chemistry, Multidisciplinary

Advanced energy materials for flexible batteries in energy storage: A review

Long Kong et al.

SMARTMAT (2020)

Article Materials Science, Multidisciplinary

Electrochemical performance of Al2O3 pre-coated spinel LiMn2O4

Hong-Ming Zhou et al.

RARE METALS (2019)

Article Chemistry, Multidisciplinary

Collapse of LiNi1-x-yCoxMnyO2 Lattice at Deep Charge Irrespective of Nickel Content in Lithium-Ion Batteries

Wangda Li et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Article Chemistry, Physical

Capacity Fading of Ni-Rich NCA Cathodes: Effect of Microcracking Extent

Gyeong Won Nam et al.

ACS ENERGY LETTERS (2019)

Review Chemistry, Physical

Prospect and Reality of Ni-Rich Cathode for Commercialization

Junhyeok Kim et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Multidisciplinary

Pushing the limit of layered transition metal oxide cathodes for high-energy density rechargeable Li ion batteries

U. -H. Kim et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Article Chemistry, Physical

Self-Passivation of a LiNiO2 Cathode for a Lithium-Ion Battery through Zr Doping

Chong S. Yoon et al.

ACS ENERGY LETTERS (2018)

Review Energy & Fuels

Batteries and fuel cells for emerging electric vehicle markets

Zachary P. Cano et al.

NATURE ENERGY (2018)

Article Chemistry, Multidisciplinary

Cationic Ordering Coupled to Reconstruction of Basic Building Units during Synthesis of High-Ni Layered Oxides

Ming-Jian Zhang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Article Chemistry, Multidisciplinary

Intergranular Cracking as a Major Cause of Long-Term Capacity Fading of Layered Cathodes

Hao Liu et al.

NANO LETTERS (2017)

Article Chemistry, Physical

Reaction Heterogeneity in LiNi0.8Co0.15Al0.05O2 Induced by Surface Layer

Antonin Grenier et al.

CHEMISTRY OF MATERIALS (2017)

Article Materials Science, Ceramics

Molten Salt Synthesis of Bismuth Ferrite Nano- and Microcrystals and their Structural Characterization

Xinhua Zhu et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)

Article Chemistry, Physical

Optimization of Ni2+/Ni3+ ratio in layered Li(Ni,Mn,Co)O2 cathodes for better electrochemistry

N. V. Kosova et al.

JOURNAL OF POWER SOURCES (2007)

Article Chemistry, Physical

Structural characterisation of the highly deintercalated LixNi1.02O2 phases (with x <= 0.30)

L Croguennec et al.

JOURNAL OF MATERIALS CHEMISTRY (2001)