☆ 4.7 Review

Zirconium-diboride silicon-carbide composites: A review

CERAMICS INTERNATIONAL (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Ceramics

Additive manufacturing of ZrB2-ZrSi2 ultra-high temperature ceramic composites using an electron beam melting process

Yujun Jia et al.

Summary: This research evaluates the feasibility of using electron beam melting (EBM) for the additive manufacturing of ultra-high temperature ceramics (UHTCs) and investigates the microstructures of the fabricated materials under different processing conditions. A mathematical model was developed to optimize the processing parameters and the simulation results were compared with experimental observations. The potential for additive manufacturing of UHTCs with complex geometries using EBM technique is demonstrated in this study.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Ceramics

Building SiC-based composites from polycarbosilane-derived 3D-SiC scaffolds via polymer impregnation and pyrolysis (PIP)

Huiwen Xiong et al.

Summary: This study utilized direct ink writing combined with polymer impregnation and pyrolysis (PIP) to prepare 3D SiC-based composites, aiming to enhance the strength of the composites by introducing interconnected pores or coated SiC within 3D scaffolds. The results demonstrate that dense 3D polymer-derived ceramics (PDCs) with adjustable structures and compositions can be achieved through direct ink writing and subsequent PIP process.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Robocasting of reaction bonded silicon carbide/silicon carbide platelet composites

Larissa Wahl et al.

Summary: The study investigated the effect of uncoated SiC platelets on the microstructure and mechanical properties of RBSC/SiCplatelets composites, showing that bending strength and fracture toughness remained relatively constant after the addition of uncoated platelets. Hardness and Young's modulus slightly increased, and SEM analysis revealed consistent values of mechanical properties due to the lack of pull-out and crack deflection on the fracture surfaces. Further work will focus on developing pastes filled with coated platelets to explore the potential for textured RBSC/SiCplatelets composites with complex structures.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Ceramics

Effect of SiC powder on the properties of SiC slurry for stereolithography

Chuanqi Hu et al.

Summary: By investigating the impact of SiC powder on the properties of SiC slurries, we successfully prepared SiC slurries with superior properties and fabricated fine complex SiC green bodies. Our research work provides fundamental understanding of using the SL technique for SiC component fabrication, explores a suitable method for producing high-quality SiC green parts through SL, and offers valuable references for preparing SiC slurries with excellent rheological and photo-polymerization properties.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

SiC-Si composite part fabrication via SiC powder binder jetting additive manufacturing and molten-Si infiltration

Ji-Won Oh et al.

Summary: Silicon carbide (SiC) is advantageous for engineering parts due to its high hardness and superior thermal stability, but it is difficult to manufacture complex products with full density. The use of reaction-bonded SiC and SiC-Silicon (Si) composite materials through molten Si infiltration has shown promise in addressing this challenge.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2021)

添加到收藏夹

Article Materials Science, Ceramics

Effect of ZrB2 powders on densification, microstructure, mechanical properties and thermal conductivity of ZrB2-SiC ceramics

Jin-Hao Yuan et al.

Summary: The densification behavior and mechanical properties of ZrB2-SiC ceramics were significantly influenced by the different synthesis routes used for producing ZrB2, with materials derived from the BRW synthesis route exhibiting the best overall performance.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Ceramics

A stereolithographic diamond-mixed resin slurry for complex SiC ceramic structures

Ruiguang Chen et al.

Summary: This study successfully prepared SiC ceramic-based composites with complex morphologies and a maximum strength of around 460 MPa using a slurry made by mixing diamond powders with light-curing resin. The influence of the diamond volume fraction in the slurry on each process stage was investigated. The slurry demonstrates great potential for efficiently manufacturing SiC-based composites in mechanical parts requiring high strength and complex structures.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Surface modification of superfine SiC powders by ternary modifiers-KH560/sodium humate/SDS and its mechanism

Wenxiao Zhang et al.

Summary: This study significantly improved the dispersion of SiC powders by using ternary modifiers, resulting in a highly stable SiC slurry and successfully preparing high-density SiC green bodies. The application of the novel strategy utilizing modifiers enhanced the electrosteric repulsion between particles, leading to stable dispersion of SiC powders in aqueous media.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Ceramics

Synthesis and flash sintering of (Hf1-xZrx)B2 solid solution powders

Jose Belisario et al.

Summary: (Hf1-xZrx)B-2 solid solution powders were synthesized by two methods, characterized, sintered into ceramics, and their properties were studied. The influence of different parameters on product characteristics was examined, and implications of the study were discussed for future research.directions.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Low-pressure plasma spraying of ZrB2-SiC coatings on C/C substrate by adding TaSi2

Rui-qiang Wang et al.

Summary: The TaSi2 modified ZrB2-SiC coatings were prepared to improve density and ablation resistance. Ta element was mainly present in the form of fine particles with nanoscale in the coatings, contributing to the reduction of porosity and enhancement of mechanical properties and ablation resistance.

SURFACE & COATINGS TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Performance optimization of complicated structural SiC/Si composite ceramics prepared by selective laser sintering

Suocheng Song et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Ceramics

Densification behavior involving creep during spark plasma sintering of ZrB2-SiC based ultra-high temperature ceramic composites

Sunil Kumar Kashyap et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Ceramics

3D-SiC decorated with SiC whiskers: Chemical vapor infiltration on the porous 3D-SiC lattices derived from polycarbosilane-based suspensions

Huiwen Xiong et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Ceramics

3D printing of high-purity silicon carbide

Kurt Terrani et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Reaction-bond composite synthesis of SiC-TiB2 by spark plasma sintering/field-assisted sintering technology (SPS/FAST)

Corson L. Cramer et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Review Materials Science, Ceramics

A review of cold sintering processes

Salvatore Grasso et al.

ADVANCES IN APPLIED CERAMICS (2020)

添加到收藏夹

Article Materials Science, Ceramics

Preparation and stereolithography of SiC ceramic precursor with high photosensitivity and ceramic yield

Jiangshan Chen et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Ceramics

Effects of short carbon fiber on the macro-properties, mechanical performance and microstructure of SiSiC composite fabricated by selective laser sintering

Yang Zou et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Ceramics

Conformable green bodies: Plastic forming of robocasted advanced ceramics

Iuliia S. Elizarova et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Synthesis and properties of macroporous SiC ceramics synthesized by 3D printing and chemical vapor infiltration/deposition

A. Baux et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ablation Behavior of SiC/ZrB2 Multilayer Coating Prepared by Plasma Spray Method

Shahla Torabi et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)

添加到收藏夹

Article Materials Science, Ceramics

Binder jetting additive manufacturing of silicon carbide ceramics: Development of bimodal powder feedstocks by modeling and experimental methods

Wenchao Du et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Mechanics

Mechanical properties of SiCp/SiC composite lattice core sandwich panels fabricated by 3D printing combined with precursor impregnation and pyrolysis

Kun Zhang et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Materials Science, Ceramics

Erosion mechanism of ternary-phase SiC/ZrB2-MoSi2-SiC ultra-high temperature multilayer coating under supersonic flame at 90° angle with speed of 1400 m/s (Mach 4)

Alireza Abdollahi et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Laser ablation behavior and mechanism of C/SiC coated with ZrB2-MoSi2-SiC/Mo prepared by HVOF

Su Cheng et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Ceramics

Stereolithography 3D printing of SiC ceramic with potential for lightweight optical mirror

Guojiao Ding et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Ceramics

Effects of carbon content on microstructure and mechanical properties of SiC ceramics fabricated by SLS/RMI composite process

Kai Liu et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Ablation behavior of SiC/ZrB2 ultra-high temperature ceramic coatings by solid shielding shrouded plasma spray for high-temperature applications (temperature above 2000 °C)

Shahla Torabi et al.

SURFACE & COATINGS TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Preform impregnation to optimize the properties and microstructure of RB-SiC prepared with laser sintering and reactive melt infiltration

Yang Zou et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Review Materials Science, Ceramics

Flash sintering of ceramics

Mattia Biesuz et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

添加到收藏夹

Article Materials Science, Ceramics

Microstructure control of highly oriented short carbon fibres in SiC matrix composites fabricated by direct ink writing

Zhongliang Lu et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure and mechanical property of Cf/SiC core/shell composite fabricated by direct ink writing

Yuanlin Xia et al.

SCRIPTA MATERIALIA (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Cold Sintering: Progress, Challenges, and Future Opportunities

Jing Guo et al.

ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 49 (2019)

添加到收藏夹

Article Chemistry, Physical

Effect of silicon addition on the microstructure, mechanical and thermal properties of Cf/SiC composite prepared via selective laser sintering

Hua Fu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Ceramics

SiCw/SiCp reinforced 3D-SiC ceramics using direct ink writing of polycarbosilane-based solution: Microstructure, composition and mechanical properties

Huiwen Xiong et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

添加到收藏夹

Article Materials Science, Ceramics

Robocasting of reaction bonded silicon carbide structures

Larissa Wahl et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication of SiC ceramic architectures using stereolithography combined with precursor infiltration and pyrolysis

Rujie He et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication of SiC whisker-reinforced SiC ceramic matrix composites based on 3D printing and chemical vapor infiltration technology

Xinyuan Lv et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

添加到收藏夹

Article Materials Science, Ceramics

Reaction bonding of silicon carbides by Binder Jet 3D-Printing, phenolic resin binder impregnation and capillary liquid silicon infiltration

A. Fleisher et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Materials Science, Ceramics

Microstructural development and factors affecting the performance of a reaction-bonded silicon carbide composite

Suocheng Song et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Chemistry, Physical

3D SiC containing uniformly dispersed, aligned SiC whiskers: Printability, microstructure and mechanical properties

Huiwen Xiong et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Ceramics

Spark plasma sintering of Al-doped ZrB2-SiC composite

Babak Mohammadpour et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Chemistry, Physical

A novel microstructural design to improve the oxidation resistance of ZrB2-SiC ultra-high temperature ceramics (UHTCs)

Haiwen Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Ceramics

Reactive spark plasma sintering and mechanical properties of ZrB2-SiC-ZrC composites from ZrC-B4C-Si system

Mingyu Xiang et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Chemistry, Physical

The ablation behavior of ZrB2-SiC coating prepared by shrouded plasma spray on SiC-coated graphite

Reza Aliasgarian et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Materials Science, Ceramics

Combustion synthesis of high-temperature ZrB2-SiC ceramics

I. V. Iatsyuk et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

添加到收藏夹

Article Materials Science, Ceramics

Direct laser sintering of reaction bonded silicon carbide with low residual silicon content

Sebastian Meyers et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

SiC/Si thin film deposited on zircaloy to improved accident tolerant fuel cladding

Kangsoo Lee et al.

THIN SOLID FILMS (2018)

添加到收藏夹

Article Materials Science, Ceramics

The fabrication and mechanical properties of SiC/SiC composites prepared by SLS combined with PIP

Laizhen Jin et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Materials Science, Ceramics

3D printing of SiC ceramic: Direct ink writing with a solution of preceramic polymers

Hehao Chen et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

添加到收藏夹

Review Materials Science, Ceramics

Review of flash sintering: materials, mechanisms and modelling

Min Yu et al.

ADVANCES IN APPLIED CERAMICS (2017)

添加到收藏夹

Article Materials Science, Ceramics

SiC and SiOC ceramic articles produced by stereolithography of acrylate modified polycarbosilane systems

Y. de Hazan et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Ultra-high temperature ceramics: Materials for extreme environments

William G. Fahrenholtz et al.

SCRIPTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Coatings & Films

Effects of ceramic particle size on microstructure and the corrosion behavior of cold sprayed SiCp/Al5056 composite coatings

Yingying Wang et al.

SURFACE & COATINGS TECHNOLOGY (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of SiC interphase on the mechanical and ablation properties of C/C-ZrC-ZrB2-SiC composites prepared by precursor infiltration and pyrolysis

Mao-yan Zhang et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Materials Science, Ceramics

Sintering behavior of ZrB2-SiC composites doped with Si3N4: A fractographical approach

Zohre Ahmadi et al.

CERAMICS INTERNATIONAL (2017)

添加到收藏夹

Article Chemistry, Physical

Electrically functional 3D-architectured graphene/SiC composites

Benito Roman-Manso et al.

CARBON (2016)

添加到收藏夹

Review Materials Science, Ceramics

Sintering additives for SiC based on the reactivity: A review

Kati Raju et al.

CERAMICS INTERNATIONAL (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Optimal Design of Nozzle for Supersonic Atmosphere Plasma Spraying

Pei Wei et al.

HIGH TEMPERATURE MATERIALS AND PROCESSES (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

ZrB2-ZrSi2-SiC composites prepared by reactive spark plasma sintering

Gang Shao et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Processing, microstructure, and mechanical properties of large-grained zirconium diboride ceramics

Eric W. Neuman et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Low temperature synthesis of dense and ultrafine grained zirconium diboride compacts by reactive spark plasma sintering

N. S. Karthiselva et al.

SCRIPTA MATERIALIA (2016)

添加到收藏夹

Article Materials Science, Coatings & Films

SiC/ZrB2-SiC-ZrC multilayer coating for carbon/carbon composites against ablation

Yulei Zhang et al.

SURFACE & COATINGS TECHNOLOGY (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Combined effects of WC and SiC on densification and thermo-mechanical stability of ZrB2 ceramics

Frederic Monteverde et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Materials Science, Ceramics

High-Temperature Oxidation of ZrB2-SiC-AlN Composites at 1600°C

Gaoyuan Ouyang et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2016)

添加到收藏夹

Article Materials Science, Ceramics

Development of ZrB2-SiC-Ti by multi stage spark plasma sintering at 1600°C

Anupam Purwar et al.

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2016)

添加到收藏夹

Article Materials Science, Ceramics

Cold spray deposition of mechanically alloyed ternary Cu-CNT-SiC composite powders

Edward Joshua T. Pialago et al.

CERAMICS INTERNATIONAL (2015)

添加到收藏夹

Article Chemistry, Physical

In-situ fabrication of ZrB2-SiC/SiC gradient coating on C/C composites

Cui Hu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

添加到收藏夹

Article Materials Science, Ceramics

Spark plasma sintering of SiC powders produced by different combustion synthesis routes

Dmitry O. Moskovskikh et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)

添加到收藏夹

Article Materials Science, Ceramics

Pressureless sintering, mechanical properties and oxidation behavior of ZrB2 ceramics doped with B4C

Hai-Bin Ma et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)

添加到收藏夹

Article Materials Science, Ceramics

The rate-dependent fracture toughness of silicon carbide- and boron carbide-based ceramics

John Pittari et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fractographical characterization of hot pressed and pressureless sintered SiAlON-doped ZrB2-SiC composites

Mehdi Shahedi Asl et al.

MATERIALS CHARACTERIZATION (2015)

添加到收藏夹

Review Engineering, Chemical

Light scattering: A review of particle characterization applications

Renliang Xu

PARTICUOLOGY (2015)

添加到收藏夹

Article Materials Science, Ceramics

Sintering Mechanisms and Kinetics for Reaction Hot-Pressed ZrB2

Jason M. Lonergan et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)

添加到收藏夹

Article Materials Science, Ceramics

Effect of graphite addition on the spark-plasma sinterability of ZrB2 and ZrB2-SiC ultra-high-temperature ceramics

Victor Zamora et al.

CERAMICS INTERNATIONAL (2014)

添加到收藏夹

Article Materials Science, Composites

Highly oriented carbon fiber-polymer composites via additive manufacturing

Halil L. Tekinalp et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical and thermal properties of hot pressed ZrB2 system with TiB2

S. Chakraborty et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2014)

添加到收藏夹

Article Materials Science, Ceramics

Thermal Properties of (Zr,TM)B2 Solid Solutions with TM = Hf, Nb, W, Ti, and Y

Devon L. McClane et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)

添加到收藏夹

Article Materials Science, Ceramics

Flash Spark Plasma Sintering (FSPS) of Pure ZrB2

Salvatore Grasso et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)

添加到收藏夹

Article Materials Science, Ceramics

The processing and properties of (Zr, Hf)B2-SiC nanostructured composites

Hailong Wang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)

添加到收藏夹

Article Materials Science, Ceramics

The effect of rare earth oxides on the pressureless liquid phase sintering of α-SiC

Hanqin Liang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)

添加到收藏夹

Article Materials Science, Coatings & Films

Preparation of oxidation protective ZrB2-SiC coating by in-situ reaction method on SiC-coated carbon/carbon composites

Xuanru Ren et al.

SURFACE & COATINGS TECHNOLOGY (2014)

添加到收藏夹

Article Materials Science, Coatings & Films

Microstructure and corrosion behavior of cold sprayed SiCp/Al 5056 composite coatings

Yingying Wang et al.

SURFACE & COATINGS TECHNOLOGY (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

ZrB2/SiC as a protective coating for C/SiC composites: Effect of high temperature oxidation on mechanical properties and anti-ablation property

Xiang Yang et al.

COMPOSITES PART B-ENGINEERING (2013)

添加到收藏夹

Article Materials Science, Ceramics

Strength of Zirconium Diboride to 2300 degrees C

Eric W. Neuman et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2013)

添加到收藏夹

Article Materials Science, Ceramics

Mechanical properties of ZrB2- and HfB2-based ultra-high temperature ceramics fabricated by spark plasma sintering

E. Zapata-Solvas et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2013)

添加到收藏夹

Article Materials Science, Ceramics

Rare-earth nitrate additives for the sintering of silicon carbide

Alfian Noviyanto et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2013)

添加到收藏夹

Article Materials Science, Ceramics

Preliminary investigation of flash sintering of SiC

E. Zapata-Solvas et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2013)

添加到收藏夹

Article Materials Science, Coatings & Films

Surface modification of electrical contacts by cold gas dynamic spraying process

Onur Tazegul et al.

SURFACE & COATINGS TECHNOLOGY (2013)

添加到收藏夹

Article Materials Science, Ceramics

Reaction-bonded SiC derived from resin precursors by Stereolithography

Xiaoyong Tian et al.

CERAMICS INTERNATIONAL (2012)

添加到收藏夹

Article Materials Science, Ceramics

C/SiC-ZrB2-ZrC composites fabricated by reactive melt infiltration with ZrSi2 alloy

Huilong Pi et al.

CERAMICS INTERNATIONAL (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

A SiC/ZrB2-SiC/SiC oxidation resistance multilayer coating for carbon/carbon composites

Xi-Yuan Yao et al.

CORROSION SCIENCE (2012)

添加到收藏夹

Article Materials Science, Ceramics

Geometrically Complex Silicon Carbide Structures Fabricated by Robocasting

Kunpeng Cai et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2012)

添加到收藏夹

Article Materials Science, Ceramics

Microstructure characterization of ZrB2-SiC composite fabricated by spark plasma sintering with TaSi2 additive

Chunfeng Hu et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)

添加到收藏夹

Article Materials Science, Ceramics

Spark-plasma sintering of ZrB2 ultra-high-temperature ceramics at lower temperature via nanoscale crystal refinement

Victor Zamora et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)

添加到收藏夹

Article Materials Science, Ceramics

Crystal-size dependence of the spark-plasma-sintering kinetics of ZrB2 ultra-high-temperature ceramics

V. Zamora et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)

添加到收藏夹

Article Materials Science, Ceramics

Strength of hot pressed ZrB2-SiC composite after exposure to high temperatures (1000-1700 °C)

Manish Patel et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)

添加到收藏夹

Article Materials Science, Ceramics

Pressureless sintering of beta silicon carbide nanoparticles

Antoine Malinge et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)

添加到收藏夹

Article Engineering, Chemical

The integration of carborundum powder comminution and surface modification in an air jet mill

Cai Chu-jiang et al.

MINERALS ENGINEERING (2012)

添加到收藏夹

Article Materials Science, Coatings & Films

SiO2 and MoSi2 formation on Inconel 625 surface via SiC coating deposited by cold spray

D. Seo et al.

SURFACE & COATINGS TECHNOLOGY (2012)

添加到收藏夹

Article Chemistry, Physical

Photopolymerization kinetics of a polyether acrylate in the presence of ceramic fillers used in stereolithography

A. Badev et al.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2011)

添加到收藏夹

Article Materials Science, Ceramics

Effect of Starting Particle Size and Oxygen Content on Densification of ZrB2

Matthew Thompson et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2011)

添加到收藏夹

Review Materials Science, Ceramics

Electric Current Activation of Sintering: A Review of the Pulsed Electric Current Sintering Process

Zuhair A. Munir et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2011)

添加到收藏夹

Article Materials Science, Ceramics

Mechanical Characterization of ZrB2-SiC Composites with Varying SiC Particle Sizes

Jeremy Watts et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Toward Oxidation-Resistant ZrB2-SiC Ultra High Temperature Ceramics

Emily Eakins et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)

添加到收藏夹

Article Materials Science, Ceramics

ZrB2-SiC Oxidation Protective Coating on C/C Composites Prepared by Vapor Silicon Infiltration Process

Haijun Zhou et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2010)

添加到收藏夹

Article Materials Science, Ceramics

Flash Sintering of Nanograin Zirconia in <5 s at 850°C

Marco Cologna et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2010)

添加到收藏夹

Article Materials Science, Ceramics

The Rapid Formation of La(OH)3 from La2O3 Powders on Exposureto Water Vapor

Peter Fleming et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2010)

添加到收藏夹

Article Nanoscience & Nanotechnology

Influence of SiCnp content on the microstructure and mechanical properties of ZrB2-SiC nanocomposite

Qiang Liu et al.

SCRIPTA MATERIALIA (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of holding time and pressure on properties of ZrB2-SiC composite fabricated by the spark plasma sintering reactive synthesis method

Yuan Zhao et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2009)

添加到收藏夹

Article Chemistry, Physical

Effect of AlN as sintering aid on hot-pressed ZrB2-SiC ceramic composite

Wenbo Han et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of SiC, TaB2 and TaSi2 additives on the isothermal oxidation resistance of fully dense zirconium diboride

Fei Peng et al.

JOURNAL OF MATERIALS RESEARCH (2009)

添加到收藏夹

Review Materials Science, Multidisciplinary

Review: liquid phase sintering

Randall M. German et al.

JOURNAL OF MATERIALS SCIENCE (2009)

添加到收藏夹

Article Materials Science, Ceramics

Properties of ZrB2-SiC Ceramics by Pressureless Sintering

Hui Zhang et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2009)

添加到收藏夹

Article Materials Science, Ceramics

Microstructure and densification of ZrB2-SiC composites prepared by spark plasma sintering

Ipek Akin et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)

添加到收藏夹

Article Materials Science, Ceramics

Synthesis of SiC by silicon and carbon combustion in air

Yun Yang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)

添加到收藏夹

Review Materials Science, Ceramics

Densification of ZrB2-based composites and their mechanical and physical properties: A review

Shu-Qi Guo

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)

添加到收藏夹

Article Materials Science, Ceramics

Reactive hot pressing of zirconium diboride

Adam L. Chamberlain et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fabrication of ZrB2-Zr cermet using laser sintering technique

Chen-Nan Sun et al.

MATERIALS LETTERS (2009)

添加到收藏夹

Article Nanoscience & Nanotechnology

Preparation and properties of 2D C/ZrB2-SiC ultra high temperature ceramic composites

Yiguang Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)

添加到收藏夹

Review Materials Science, Multidisciplinary

Electric current activated/assisted sintering (ECAS): a review of patents 1906-2008

Salvatore Grasso et al.

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2009)

添加到收藏夹

Article Nanoscience & Nanotechnology

Pressureless sintering mechanism and microstructure of ZrB2-SiC ceramics doped with boron

Xin-Gang Wang et al.

SCRIPTA MATERIALIA (2009)

添加到收藏夹

Article Nanoscience & Nanotechnology

Pressureless sintering of ZrB2-SiC ceramics: the effect of B4C content

Hui Zhang et al.

SCRIPTA MATERIALIA (2009)

添加到收藏夹

Article Chemistry, Physical

Effects of Y2O3 on microstructure and mechanical properties of ZrB2-SiC ceramics

Xinghong Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2008)

添加到收藏夹

Article Materials Science, Ceramics

In situ synthesis of ultrafine ZrB2-SiC composite powders and the pressureless sintering behaviors

Yongjie Yan et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)

添加到收藏夹

Article Materials Science, Ceramics

Effect of additives on the activation energy for sintering of silicon carbide

Darin A. Ray et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)

添加到收藏夹

Article Materials Science, Ceramics

Ultra-high-temperature ceramic coatings for oxidation protection of carbon-carbon composites

Erica L. Corral et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)

添加到收藏夹

Article Materials Science, Ceramics

High-temperature chemistry and oxidation of ZrB2 ceramics containing SiC, Si3N4, Ta5Si3, and TaSi2

Inna G. Talmy et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)

添加到收藏夹

Article Materials Science, Ceramics

Oxidation resistance of fully dense ZrB2 with SiC, TaB2, and TaSi2 additives

Fei Peng et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)

添加到收藏夹

Article Materials Science, Ceramics

Pressureless sintering of zirconium diboride: Particle size and additive effects

William G. Fahrenholtz et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)

添加到收藏夹

Article Materials Science, Ceramics

Spark plasma sintering of Zr- and Hf-borides with decreasing amounts of MoSi2 as sintering aid

D. Sciti et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

In situ synthesis mechanism and characterization of ZrB2-ZrC-SiC ultra high-temperature ceramics

Qu Qiang et al.

MATERIALS CHEMISTRY AND PHYSICS (2008)

添加到收藏夹

Article Nanoscience & Nanotechnology

Pressureless densification of ZrB2-Sic composites with vanadium carbide

Ji Zou et al.

SCRIPTA MATERIALIA (2008)

添加到收藏夹

Article Materials Science, Ceramics

Pressureless sintering of ZrB2-SiC ceramics

Shi C. Zhang et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)

添加到收藏夹

Article Materials Science, Ceramics

Pressureless sintering of zirconium diboride using boron carbide and carbon additions

Sumin Zhu et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2007)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication and characterization of an ultra-high-temperature carbon fiber-reinforced ZrB2-SiC matrix composite

Sufang Tang et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2007)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of MoSi2 additions on the properties of Hf- and Zr-B2 composites produced by pressureless sintering

Laura Silvestroni et al.

SCRIPTA MATERIALIA (2007)

添加到收藏夹

Article Nanoscience & Nanotechnology

Pressureless sintering of carbon-coated zirconium diboride powders

Sumin Zhu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)

添加到收藏夹

Review Materials Science, Ceramics

Refractory diborides of zirconium and hafnium

William G. Fahrenholtz et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of hot pressing time and temperature on the microstructure and mechanical properties of ZrB2-SiC

Alireza Rezaie et al.

JOURNAL OF MATERIALS SCIENCE (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical-activation-assisted combustion synthesis of SiC

Yun Yang et al.

MATERIALS LETTERS (2007)

添加到收藏夹

Article Materials Science, Ceramics

Thermodynamic analysis of ZrB2-SiC oxidation: Formation of a SiC-depleted region

William G. Fahrenholtz

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2007)

添加到收藏夹

Article Materials Science, Ceramics

Influence of silicon carbide particle size on the microstructure and mechanical properties of zirconium diboride-silicon carbide ceramics

Sumin Zhu et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2007)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication and properties of reactively hot pressed ZrB2-SiC ceramics

James W. Zimmermann et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2007)

添加到收藏夹

Article Materials Science, Ceramics

Evolution of structure during the oxidation of zirconium diboride-silicon carbide in air up to 1500 degrees C

Alireza Rezaie et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of an HfB2+30 vol.% SiC composite consolidated by spark plasma sintering

F. Monteverde et al.

MATERIALS CHEMISTRY AND PHYSICS (2006)

添加到收藏夹

Article Materials Science, Ceramics

Low-temperature densification of zirconium diboride ceramics by reactive hot pressing

Adam L. Chamberlain et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)

添加到收藏夹

Article Materials Science, Ceramics

Pressureless sintering of high-density ZrB2-SiC ceramic composites

Yongjie Yan et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure and mechanical properties of ZrB2-MoSi2 ceramic composites produced by different sintering techniques

Diletta Sciti et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Properties of ceramics in the system ZrB2-Ta5Si3

I. G. Talmy et al.

JOURNAL OF MATERIALS RESEARCH (2006)

添加到收藏夹

Article Materials Science, Ceramics

Oxidation of zirconium diboride-silicon carbide at 1500°C at a low partial pressure of oxygen

Alireza Rezaie et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)

添加到收藏夹

Article Materials Science, Ceramics

Pressureless densification of zirconium diboride with boron carbide additions

SC Zhang et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)

添加到收藏夹

Article Materials Science, Ceramics

Production of silicon carbide pieces by immersion of silicon preforms in carbonaceous powders

M Gómez et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Beneficial effects of an ultra-fine α-SiC incorporation on the sinterability and mechanical properties of ZrB2

F Monteverde

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2006)

添加到收藏夹

Review Materials Science, Multidisciplinary

The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method

ZA Munir et al.

JOURNAL OF MATERIALS SCIENCE (2006)

添加到收藏夹

Article Materials Science, Ceramics

Pressureless sintering of zirconium diboride

AL Chamberlain et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)

添加到收藏夹

Article Materials Science, Ceramics

Densification of liquid phase sintered silicon carbide

A Can et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2006)

添加到收藏夹

Article Materials Science, Ceramics

Fast densification of ultra-high-temperature ceramics by spark plasma sintering

A Bellosi et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2006)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fundamental investigations on the spark plasma sintering/synthesis process III. Current effect on reactivity

U Anselmi-Tamburini et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fundamental investigations on the spark plasma sintering/synthesis process - II. Modeling of current and temperature distributions

U Anselmi-Tamburini et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fundamental investigations on the spark plasma sintering/synthesis process - I. Effect of dc pulsing on reactivity

W Chen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)

添加到收藏夹

Article Materials Science, Multidisciplinary

Comparison of ZrB2-ZrC-SiC composites fabricated by spark plasma sintering and hot-pressing

V Medri et al.

ADVANCED ENGINEERING MATERIALS (2005)

添加到收藏夹

Article Materials Science, Ceramics

Microstructure and mechanical properties of liquid-phase-sintered SiC with AlN and Y2O3 additions

K Suzuki et al.

CERAMICS INTERNATIONAL (2005)

添加到收藏夹

Article Materials Science, Multidisciplinary

Efficacy of HfN as sintering aid in the manufacture of ultrahigh-temperature metal diborides-matrix ceramics

F Monteverde et al.

JOURNAL OF MATERIALS RESEARCH (2004)

添加到收藏夹

Article Materials Science, Ceramics

High-strength zirconium diboride-based ceramics

AL Chamberlain et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Oxidation-based materials selection for 2000°C plus hypersonic aerosurfaces:: Theoretical considerations and historical experience

MM Opeka et al.

JOURNAL OF MATERIALS SCIENCE (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and properties of an HfB2-SiC composite for ultra high temperature applications

F Monteverde et al.

ADVANCED ENGINEERING MATERIALS (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Beneficial effects of AlN as sintering aid on microstructure and mechanical properties of hot-pressed ZrB2

F Monteverde et al.

ADVANCED ENGINEERING MATERIALS (2003)

添加到收藏夹

Article Nanoscience & Nanotechnology

Advances in microstructure and mechanical properties of zirconium diboride based ceramics

F Monteverde et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

On the preparation of bio-, nano- and structural ceramics and composites by spark plasma sintering

M Nygren et al.

SOLID STATE SCIENCES (2003)

添加到收藏夹

Article Materials Science, Coatings & Films

Plasma spray deposition and high temperature characterization of ZrB2-SiC protective coatings

C Bartuli et al.

SURFACE & COATINGS TECHNOLOGY (2002)

添加到收藏夹

Article Materials Science, Multidisciplinary

Sintering of nano crystalline α silicon carbide by doping with boron carbide

MS Datta et al.

BULLETIN OF MATERIALS SCIENCE (2002)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of the addition of silicon nitride on sintering behaviour and microstructure of zirconium diboride

F Monteverde et al.

SCRIPTA MATERIALIA (2002)

添加到收藏夹

Article Materials Science, Ceramics

ZrO2-Al2O3 eutectic plates produced by laser zone melting

A Larrea et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2002)

添加到收藏夹

Article Materials Science, Ceramics

Processing and properties of zirconium diboride-based composites

F Monteverde et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2002)

添加到收藏夹

Article Nanoscience & Nanotechnology

Sintering, consolidation, reaction and crystal growth by the spark plasma system (SPS)

M Omori

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)

添加到收藏夹

Article Materials Science, Ceramics

Influence of silica and aluminum contents on sintering of and grain growth in 6H-SiC powders

H Tanaka et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2000)

添加到收藏夹

Article Materials Science, Ceramics

Features of structure formation with zone melting of powder boron-containing refractory materials

PI Loboda

POWDER METALLURGY AND METAL CERAMICS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.