Failure and fragmentation of ceramic target with varying geometric configuration under ballistic impact

The failure and fragmentation of monolithic bare alumina 99.5% ceramic target and energy dissipation of steel 4340 projectile have been studied in a series of ballistic experiments carried out, with the incidence velocities in a range, 122-290 m/s. The velocity drop and energy dissipation increased with incidence velocity for 10 mm thick target with damage zone extended upon the whole area of rear face at higher velocities. The ballistic results obtained with the 10 mm thick target have been compared with the ballistic performance of the 5 mm thick target used in a previous study to explore the effects of target thickness on the failure mechanism. A model for the residual velocity of projectile after perforation of the single layered ceramic target has been developed based on the Lambert Jonas model by using the experimental data available for 5 mm and 10 mm thick alumina 99.5% target against 10.9 mm projectile. The residual velocities and damage patterns were reproduced with a reasonable amount of accuracy by a three-dimensional finite element model developed on commercial ABAQUS/ CAE. The effect of obliquity and projectile diameter to target thickness ratio (D/T) on ballistic performance has been determined by the numerical simulation model with impact velocity in a range of 300-500 m/s. A spatial variation of ejected fragments velocity at different time steps was plotted to develop a velocity profile for the ceramic fragments coming out of the target. A semi-empirical model has been proposed for residual velocity after perforation of a monolithic ceramic target, relating to the incidence velocity and projectile diameter to target thickness ratio. The monolithic ceramic targets have been investigated for a comparative assessment of energy dissipation by the ceramic layer to eventually design an efficient front layer of a ceramic based composite armour in future studies.

Automated summary

This study investigated the failure and energy dissipation of monolithic alumina ceramic targets through experiments and numerical simulations, exploring the impact of target thickness on failure mechanisms and developing a model for residual velocity.