4.7 Article

Nanostructured CoFe2O4 and their nanohybrid with rGO as an efficient electrode for next-generation supercapacitor

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Ceramics

Synthesis of La1-xGdxFe1-yCoyO3/r-GO nanocomposite with integrated features for the treatment of hazardous industrial effluents

Muhammad Sabir et al.

Summary: In this study, binary metal doping and composite formation strategies were used to prepare a highly efficient photocatalytic nanocomposite. The improved photocatalytic activity was achieved by tuning the bandgap, increasing the surface area, and reducing the electrical resistivity of the composite material.

CERAMICS INTERNATIONAL (2022)

Article Materials Science, Ceramics

Nanostructured V2O5 and its nanohybrid with MXene as an efficient electrode material for electrochemical capacitor applications

Majid Mahmood et al.

Summary: The nanohybrid of vanadium pentoxide and MXene shows improved specific capacity and excellent cyclic, electrochemical, and mechanical performance, maintaining high specific capacity even after extensive testing. The hydrothermal synthesis of nanowires and ultrasound route formation of the nanohybrid effectively address the stacking issue of two-dimensional MXene sheets, allowing for effective interface interaction and suppression of stacking.

CERAMICS INTERNATIONAL (2022)

Article Engineering, Environmental

Ti3C2-MXene composite films functionalized with polypyrrole and ionic liquid-based microemulsion particles for supercapacitor applications

Qi Fan et al.

Summary: A novel strategy utilizing polymerized polypyrrole (PPy) particles and ionic liquid (ILs)-based microemulsion particles as dual spacers is developed to fabricate functionalized Ti3C2-MXene composite films for high-performance supercapacitors. The PPy particles circumvent restacking issues of MXene nanosheets and contribute to desirable capacitance, while ILs-based microemulsions improve fast ion diffusion kinetics and electrolyte imbibition steps, resulting in excellent specific capacitance, rate capability, and cycling stability. The composite films show great potential in advanced MXene-based supercapacitors using various ionic liquid electrolytes, achieving high energy density and maintaining high coulombic efficiency after 2000 cycles.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Environmental

Nitrogen and boron co-doped densified laser-induced graphene for supercapacitor applications

Mahima Khandelwal et al.

Summary: This study demonstrates a facile method to fabricate N and B co-doped laser-induced graphene for supercapacitor applications. The NB-dLIG showed significantly improved capacitive performance in a three-electrode assembly and a solid-state flexible supercapacitor, indicating its potential for various electrochemical applications.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

Engineering the active sites tuned MoS2 nanoarray structures by transition metal doping for hydrogen evolution and supercapacitor applications

Dhanasekaran Vikraman et al.

Summary: Extensive investigations have been conducted on the two-dimensional molybdenum sulfide (MoS2) in the past two decades due to their dominating characteristics for various applications. The insertion of doping transition metals such as nickel, copper, and iron into MoS2 matrix was attempted to activate more active sites and enhance electrocatalytic activity. The modified morphological properties, enriched surface area, and plentiful active edges were established for the metal doped MoS2, leading to improved hydrogen evolution and supercapacitor performance.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Chemistry, Physical

Design and fabrication of Fe2O3/FeP heterostructure for oxygen evolution reaction electrocatalysis

Iqbal Ahmad et al.

Summary: The study successfully synthesized a heterostructure of iron oxide/iron phosphide (Fe2O3/FeP) and demonstrated it as a more active electrocatalyst that can initiate the oxygen evolution reaction at a low potential.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Chemistry, Physical

Facile synthesis of nanoflower-like phosphorus-doped Ni3S2/CoFe2O4 arrays on nickel foam as a superior electrocatalyst for efficient oxygen evolution reaction

Jiao-Jiao Duan et al.

Summary: The research developed flower-like phosphorus doped Ni3S2/CoFe2O4 arrays on three-dimensional nickel foam via a two-step hydrothermal treatment and subsequent phosphorization, demonstrating greatly improved OER performance in 1.0 M KOH solution.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Materials Science, Ceramics

CuxNi1-xO nanostructures and their nanocomposites with reduced graphene oxide: Synthesis, characterization, and photocatalytic applications

Bushra Bashir et al.

Summary: NiO nanostructure was synthesized using a simple co-precipitation method and embedded on a reduced graphene oxide surface through ultrasonication. The study found that doping reduced grain size, increased BET surface area, and improved rate constant.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Ceramics

Direct decoration of Co3O4/r-GO nanocomposite on nickel foam for electrochemical energy storage applications

Muhammad Aadil et al.

Summary: A novel Co3O4/r-GO nanocomposite electrode material with higher specific capacitance, good rate capability, and excellent cycle performance has been prepared for electrochemical applications. The electrode shows a high specific capacitance of 865 Fg(-1) @ 1 Ag-1 and exceptional cycling stability with 93.2% retention after 5000 cycles, making it a promising candidate as an anode material for practical applications in the electrochemical capacitor.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Ceramics

Fabrication of nickel foam supported Cu-doped Co3O4 nanostructures for electrochemical energy storage applications

Muhammad Aadil et al.

Summary: The synthesized Cu-doped Co3O4@NF sample exhibited excellent electrical conductivity, specific capacitance, and cyclic activity, attributed to its superb electrical conductivity, binder-free design, 2D morphology, porous nature, and hierarchical structure. These features not only enhanced the exposed surface area of the sample, but also protected it from pulverization, volume expansion, and agglomeration during electrochemical tests.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Ceramics

Mesoporous and macroporous Ag-doped Co3O4 nanosheets and their superior photo-catalytic properties under solar light irradiation

Muhammad Aadil et al.

Summary: In this study, mesoporous and macroporous nanosheets of Ag.Co3O4 were successfully synthesized with high catalytic activity for efficient removal of toxic dyes under natural sunlight. The exceptional activity of Ag.Co3O4 sample is attributed to its novel bimodal porous structure, high surface area, narrow bandgap, good electrical conductivity, and low charge transfer resistance, showing great potential for eliminating harmful dyes from industrial effluents.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Ceramics

Hydrothermal synthesis of CuS nanochips and their nanohybrids with CNTs for electrochemical energy storage applications

Humera Sabeeh et al.

Summary: Nanostructured carbonaceous materials, such as CNTs, graphene, and activated carbon, exhibit excellent conductivity and larger surface area, which can significantly enhance the electrochemical performance of transition metals based pseudocapacitive materials. The study successfully prepared copper sulfide nanochips via the hydrothermal method and improved their electrical conductivity and capacitive properties by forming nanohybrids with conductive CNTs. The nanohybrid sample demonstrated enhanced capacitive ability, gravimetric capacitance, and cyclic-aptitude compared to the pristine cobalt sulfide sample, showing great potential for practical application in next-generation electrochemical devices.

CERAMICS INTERNATIONAL (2021)

Review Green & Sustainable Science & Technology

Solution-method processed Bi-type nanoelectrode materials for supercapacitor applications: A review

Nanasaheb M. Shinde et al.

Summary: This review article focuses on solution-processed nanocrystalline Bi-type electrode materials and their electrochemical energy storage applications, discussing their characteristics and future directions.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Article Engineering, Chemical

Facile synthesis of binary metal substituted copper oxide as a solar light driven photocatalyst and antibacterial substitute

Muhammad Aadil et al.

Summary: This study synthesized transition metal substituted CuO samples via wet chemical route for photocatalytic and antibacterial applications. Among the samples, CMAO showed excellent photocatalytic activity and bactericidal activity against both Gram-positive and Gram-negative bacterial strains. The results indicated that binary metal substituted CuO (CMAO) has the potential to effectively degrade dyes and eliminate bacteria in industrial effluents.

ADVANCED POWDER TECHNOLOGY (2021)

Article Materials Science, Ceramics

Fabrication of binary metal doped CuO nanocatalyst and their application for the industrial effluents treatment

Atta ur Rehman et al.

Summary: In this study, binary transition metal (Ce and Zn) doped CuO nanocatalyst was successfully fabricated through a facile co-precipitation technique. The doped sample exhibited significantly higher removal efficiency for MB dye compared to the pristine CuO sample, attributed to its higher surface area and tuned band-gap. The superior adsorption and degradation aptitude of the doped sample were also supported by a higher rate constant in the degradation process.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Ceramics

Ferroelectric, dielectric, magnetic, structural and photocatalytic properties of Co and Fe doped LaCrO3 perovskite synthesized via micro-emulsion route

M. Aamir et al.

Summary: In this study, La(1-x)Co(x)Cr(1-y)FeyO(3) perovskite was successfully synthesized via a simple micro-emulsion route. The properties of the perovskite were significantly altered by the addition of Co and Fe ions, leading to enhanced dielectric, ferroelectric, and magnetic behavior. The La0.40Co0.60Cr0.40Fe0.60O3 compound showed promising potential for photocatalytic dye degradation under visible light exposure, demonstrating efficient performance under solar light exposure.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Ceramics

Mn1-xCuxO2/ reduced graphene oxide nanocomposites: Synthesis, characterization, and evaluation of visible light mediated catalytic studies

Muhammad Farooq Warsi et al.

Summary: A Cu-doped MnO2/r-GO nanocomposite was successfully synthesized in this study, and its superior photocatalytic performance under visible light irradiation was experimentally confirmed.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Ceramics

Fabrication of carbon cloth supported Ni@Fe double hydroxide based electrode for flexible supercapacitor applications

Imran Shakir et al.

Summary: The study successfully fabricated a flexible and binder-free nickel-iron hydroxide electrode on carbon cloth, demonstrating high gravimetric capacitance and exceptional cyclic stability, showcasing its potential for practical applications in flexible energy storage systems.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Ceramics

Fabrication of different conductive matrix supported binary metal oxides for supercapacitors applications

Nusrat Shaheen et al.

Summary: The study fabricated spinet binary-metal oxide (FeCo2O4) through a solvent-free and cost-effective approach, and prepared nanocomposites with three different conductive matrices. The FeCo2O4/PANI nanocomposite exhibited the highest specific capacitance and excellent cyclic stability, attributed to its high conductivity, large surface area, and synergy effects. The electrochemical and electrical measurements suggested that the FeCo2O4/PANI nanostructure is a promising contender for energy storage applications.

CERAMICS INTERNATIONAL (2021)

Article Chemistry, Analytical

Fabrication of rationally designed CNTs supported binary nanohybrid with multiple approaches to boost electrochemical performance

Muhammad Aadil et al.

Summary: This study fabricated a nanostructured hybrid electrode with a three-dimensional spatial framework, demonstrating excellent specific capacitance, good rate capability, and superior cyclic stability.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2021)

Article Materials Science, Multidisciplinary

Fabrication of highly resistive La-Zn co-substituted spinel strontium nanoferrites for high frequency devices applications

Iqbal Ahmad et al.

Summary: The synthesized La-Zn co-doped strontium nanoferrites show variations in dielectric parameters, DC resistivity, and AC conductivity with the concentration of La3+ and Zn2+ ions. Additionally, the frequency dependent behavior of dielectric parameters indicates different performance of the ferrite material at different frequencies.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Review Green & Sustainable Science & Technology

Review of integration of small modular reactors in renewable energy microgrids

D. Michaelson et al.

Summary: Integration of renewable energy sources in microgrids can enhance system resilience and reduce carbon emissions, but the intermittent nature of renewables requires energy storage to compensate for supply-demand imbalances. Traditional energy storage can be costly, thus introducing new technologies like small modular reactors as alternatives to traditional power sources is feasible.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Article Materials Science, Multidisciplinary

Fabrication of graphene supported binary nanohybrid with multiple approaches for electrochemical energy storage applications

Muhammad Aadil et al.

Summary: The Mn.Co3O4/r-GO nanohybrid electrode shows exceptional electrochemical activity, outstanding cyclic stability, and higher gravimetric capacitance.

SYNTHETIC METALS (2021)

Article Chemistry, Physical

Graphene oxide and reduced graphene oxide supported ZnO nanochips for removal of basic dyes from the industrial effluents

Khadija Chaudhary et al.

Summary: The synthesis of highly active and cheap photo-catalyst materials consisting of ZnO nanochips assembled over graphene derivatives, ZnO@GO and ZnO@RGO, was investigated. Results showed that ZnO@RGO had higher efficiency with 2.4 and 2 times higher kinetic rates for RhB and MB removal, respectively, attributed to the partially restored conjugated structure of RGO leading to better charge migration across semiconductor-carbon heterojunctions. The active species involved in the degradation process were systematically investigated, and a photo-catalytic mechanism was proposed, demonstrating good recyclability and resistance to photo-corrosion for both ZnO@GO and ZnO@RGO even after 360 minutes of consecutive photo-catalytic activity.

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2021)

Article Chemistry, Physical

Fabrication of MnO2 nanowires and their nanohybrid with flat conductive matrix for the treatment of industrial effluents

Muhammad Aadil et al.

Summary: The development of a novel photocatalyst MXene/MnO2@H2O2 demonstrated significantly greater photocatalytic activity in degrading crystal violet dye compared to pure MnO2 and MXene/MnO2 nanohybrid photocatalysts. This innovative design improved the stability of MXene and reduced the resistivity and photocorrosion of semiconductive photocatalysts. The nanohybrid photocatalyst efficiently degraded dyes and inhibited the rapid growth of microbes, showcasing its potential for industrial wastewater treatment.

FLATCHEM (2021)

Article Electrochemistry

Fabrication of CNTs supported binary nanocomposite with multiple strategies to boost electrochemical activities

Muhammad Aadil et al.

Summary: In this study, CoS2/CNTs nanocomposite electrodes were successfully prepared via a two-step hydrothermal and post-annealing approach, showing excellent performance and cyclic stability for energy storage applications. The CNTs-supported CoS2 sample exhibited outstanding rate capability and improved electrochemical properties.

ELECTROCHIMICA ACTA (2021)

Article Materials Science, Multidisciplinary

Hierarchically porous CuO microspheres and their r-GO based nanohybrids for electrochemical supercapacitors applications

Sheraz Yousaf et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Article Materials Science, Multidisciplinary

Free-standing urchin-like nanoarchitectures of Co3O4 for advanced energy storage applications

Muhammad Aadil et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Article Chemistry, Physical

One-pot synthesis CoFe2O4/CNTs composite for asymmetric supercapacitor electrode

Luchao Yue et al.

SOLID STATE IONICS (2019)

Article Chemistry, Physical

Superior electrochemical activity of α-Fe2O3/rGO nanocomposite for advance energy storage devices

Muhammad Aadil et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Article Chemistry, Multidisciplinary

Electrochemical and photovoltaic study of sunset yellow and tartrazine dyes

Iqbal Ahmad et al.

MONATSHEFTE FUR CHEMIE (2015)

Article Chemistry, Multidisciplinary

Electrochemical performances of CoFe2O4 nanoparticles and a rGO based asymmetric supercapacitor

K. Vijaya Sankar et al.

RSC ADVANCES (2015)

Article Electrochemistry

Ethylene glycol reduced graphene oxide/polypyrrole composite for supercapacitor

Yan Liu et al.

ELECTROCHIMICA ACTA (2013)

Review Chemistry, Physical

Graphene/metal oxide composite electrode materials for energy storage

Zhong-Shuai Wu et al.

NANO ENERGY (2012)

Article Chemistry, Multidisciplinary

Graphene Oxide-MnO2 Nanocomposites for Supercapacitors

Sheng Chen et al.

ACS NANO (2010)

Article Chemistry, Physical

Deposition of Co3O4 nanoparticles onto exfoliated graphite oxide sheets

Chao Xu et al.

JOURNAL OF MATERIALS CHEMISTRY (2008)