4.7 Article

Development of fly ash and slag based high-strength alkali-activated foam concrete

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Construction & Building Technology

Ultra-High performance concrete (UHPC) with polypropylene (Pp) and steel Fibres: Investigation on the high temperature behaviour

Francesca Sciarretta et al.

Summary: The research demonstrates that ultra-high performance concretes require hybrid fiber reinforcement (PP + steel) to withstand high temperatures, with residual strength increasing after exposure to 200 degrees Celsius. However, using polypropylene fibers alone may not always prevent spalling in small UHPC samples exposed to high temperatures.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Effect of curing conditions on freeze-thaw resistance of geopolymer mortars containing various calcium resources

Zhenzhen Jiao et al.

Summary: This study investigated the impact of curing conditions on the freeze-thaw resistance of geopolymer mortars. The results showed that steam curing led to better early-age strength and improved freeze-thaw resistance. The water-to-ash ratio was found to play a critical role in the freeze-thaw resistance under different curing conditions.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Green & Sustainable Science & Technology

Approaches to enhance the carbonation resistance of fly ash and slag based alkali-activated mortar- experimental evaluations

Shan Liu et al.

Summary: The study aims to enhance the carbonation resistance of fly ash and slag based alkali-activated mortar by adding different additives. Test results showed that adding calcined hydrotalcite is the most effective measure in improving carbonation resistance and compressive strength.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Construction & Building Technology

Progress, current thinking and challenges in geopolymer foam concrete technology

K. Dhasindrakrishna et al.

Summary: Geopolymer foam concrete (GFC) with its porous structure offers lightweight, acoustic and thermal insulation, and fire resistance properties, which are influenced by materials, foaming methods, curing conditions, and additives. Further research is needed in understanding fresh properties, durability, and processing techniques to facilitate industrial applications and the development of 3D printable GFC.

CEMENT & CONCRETE COMPOSITES (2021)

Article Polymer Science

On the structural evolution of textile grade polyacrylonitrile fibers during stabilization and carbonization: Towards the manufacture of low-cost carbon fiber

Xing Jin et al.

Summary: This study attempted to produce low cost carbon fibers using textile grade polyacrylonitrile (Tex-PAN) fibers, and found that the tensile properties of carbon fibers from Tex-PAN were comparable with those of commercial PAN fibers. Tex-PAN precursor fibers may be an indispensable candidate for low cost carbon fiber production.

POLYMER DEGRADATION AND STABILITY (2021)

Article Materials Science, Multidisciplinary

Effect of filler particle characteristics on yield stress and viscosity of fresh sulfur composites

Jin Hyun Lee et al.

Summary: The study aimed to quantify the effects of mixing temperature and filler particle characteristics on the rheological properties of sulfur composites, revealing that the yield stress is influenced by the type and volumetric ratio of fillers, while viscosity is governed by the specific surface area of filler particles.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Article Construction & Building Technology

Characteristics of hemp fibre reinforced foam concretes with fly ash and Taguchi optimization

Osman Gencel et al.

Summary: This study investigated the microstructural, mechanical, durability and thermal characteristics of hemp fibers (HFs) reinforced foam concrete with fly ash (FA) using Taguchi optimization approach. Addition of HFs significantly enhanced compressive and flexural strength of foam concrete, while FA addition reduced drying shrinkage and thermal conductivity, and improved high temperature resistance.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Physico-mechanical, durability and thermal properties of basalt fiber reinforced foamed concrete containing waste marble powder and slag

Oguzhan Yavuz Bayraktar et al.

Summary: This study focused on investigating the physico-mechanical, durability, and thermal properties of basalt fibers reinforced foamed concrete containing waste marble powder and ground granulated blast furnace slag. Results indicated significant enhancements in compressive and flexural strength were achieved with the addition of WMP and BF, with the best performance observed with 30% GGBFS and 1% BF.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Food Science & Technology

Foams generated from viscous non-Newtonian shear-thinning liquids in a continuous multi rotor-stator device

Saifullah Jabarkhyl et al.

INNOVATIVE FOOD SCIENCE & EMERGING TECHNOLOGIES (2020)

Article Construction & Building Technology

Physical and mechanical properties of foam concretes containing granulated blast furnace slag as fine aggregate

Osman Hulusi Oren et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Effects of surfactant on thermo-mechanical behavior of geopolymer foam paste made with sodium perborate foaming agent

Viengsai Phavongkham et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Materials Science, Multidisciplinary

Mechanical properties of geopolymer composite foams reinforced with carbon nanofibers via modified hydrogen peroxide method

Shu Yan et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Article Construction & Building Technology

Mechanical and durability properties of hybrid fiber reinforced foam concrete

Bhagyasree Raj et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Steel fibre reinforced alkali-activated geopolymer concrete slabs subjected to natural gas explosion in buried utility tunnel

Qingfei Meng et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Mechanics

Non-Newtonian fluid flow through a sudden pipe contraction under non-isothermal conditions

K. E. Ryltseva et al.

JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2020)

Review Construction & Building Technology

Hardening evolution of geopolymers from setting to equilibrium: A review

Navid Ranjbar et al.

CEMENT & CONCRETE COMPOSITES (2020)

Review Mechanics

Basalt-based fiber-reinforced materials and structural applications in civil engineering

Elisabetta Monaldo et al.

COMPOSITE STRUCTURES (2019)

Article Construction & Building Technology

Facile preparation of slag or fly ash geopolymer composite coatings with flame resistance

YaChao Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Effect of foaming agent on physical and mechanical properties of alkali-activated slag foamed concrete

Juan He et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Effects of bentonite slurry on air-void structure and properties of foamed concrete

Yue Xie et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Microstructure and mechanical properties of carbon microfiber reinforced geopolymers at elevated temperatures

Promoda Behera et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Mechanical and acoustic properties of fiber-reinforced alkali-activated slag foam concretes containing lightweight structural aggregates

M. Mastali et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Green & Sustainable Science & Technology

Alkali activated slag foams: The effect of the alkali reaction on foam characteristics

Ailar Hajimohammadi et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Article Construction & Building Technology

The influence of the stabilizing agent SDS on porosity development in alkali-activated fly-ash based foams

L. Korat et al.

CEMENT & CONCRETE COMPOSITES (2017)

Article Construction & Building Technology

A novel waterproof, fast setting and high early strength repair material derived from metakaolin geopolymer

Ping Duan et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Review Green & Sustainable Science & Technology

Fly ash-based geopolymer: clean production, properties and applications

Xiao Yu Zhuang et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Review Green & Sustainable Science & Technology

Insulation materials for the building sector: A review and comparative analysis

S. Schiavoni et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Review Construction & Building Technology

Properties and applications of foamed concrete; a review

Y. H. Mugahed Amran et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

Physical and mechanical properties of lightweight aerated geopolymer

Jay G. Sanjayan et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Chemistry, Multidisciplinary

Nanobiosensor for the detection and quantification of pork adulteration in meatball formulation

M. E. Ali et al.

JOURNAL OF EXPERIMENTAL NANOSCIENCE (2014)

Article Construction & Building Technology

Resistance of lignite bottom ash geopolymer mortar to sulfate and sulfuric acid attack

Vanchai Sate et al.

CEMENT & CONCRETE COMPOSITES (2012)

Article Materials Science, Multidisciplinary

Microstructure control in ceramic foams via mixed cationic/anionic surfactant

Min Wang et al.

MATERIALS LETTERS (2012)

Article Green & Sustainable Science & Technology

An environmental evaluation of geopolymer based concrete production: reviewing current research trends

G. Habert et al.

JOURNAL OF CLEANER PRODUCTION (2011)

Article Construction & Building Technology

Lightweight concretes of activated metakaolin-fly ash binders, with blast furnace slag aggregates

R. Arellano Aguilar et al.

CONSTRUCTION AND BUILDING MATERIALS (2010)

Article Engineering, Environmental

Preparation of sintered foam materials by alkali-activated coal fly ash

Yelong Zhao et al.

JOURNAL OF HAZARDOUS MATERIALS (2010)

Article Polymer Science

Non-Newtonian flow in porous media

Taha Sochi

POLYMER (2010)

Review Thermodynamics

A review on the utilization of fly ash

M. Ahmaruzzaman

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2010)

Review Physics, Multidisciplinary

Beyond the Navier-Stokes equations:: Burnett hydrodynamics

L. S. Garcia-Colin et al.

PHYSICS REPORTS-REVIEW SECTION OF PHYSICS LETTERS (2008)

Article Construction & Building Technology

Composition and microstructure of alkali activated fly ash binder:: Effect of the activator

A Fernández-Jiménez et al.

CEMENT AND CONCRETE RESEARCH (2005)

Article Construction & Building Technology

The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation

CK Yip et al.

CEMENT AND CONCRETE RESEARCH (2005)

Article Construction & Building Technology

The effect of high fly ash content on the compressive strength of foamed concrete

EP Kearsley et al.

CEMENT AND CONCRETE RESEARCH (2001)