相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Bone defect map of the true acetabulum in hip dysplasia (Crowe type II and III) based on three-dimensional image reconstruction analysis
Xinggui Wen et al.
SCIENTIFIC REPORTS (2021)
Total hip arthroplasty using a three-dimensional porous titanium acetabular cup: an examination of micromotion using subject-specific finite element analysis
Takaki Miyagawa et al.
BMC MUSCULOSKELETAL DISORDERS (2021)
Effects of the depth of the acetabular component during simulated acetabulum reaming in total hip arthroplasty
Jianlin Zuo et al.
SCIENTIFIC REPORTS (2021)
Custom Made Monoflange Acetabular Components for the Treatment of Paprosky Type III Defects
Sebastian Philipp von Hertzberg-Boelch et al.
JOURNAL OF PERSONALIZED MEDICINE (2021)
Biomechanical effect of intertrochanteric curved varus osteotomy on stress reduction in femoral head osteonecrosis: a finite element analysis
Yuzhu Wang et al.
JOURNAL OF ORTHOPAEDIC SURGERY AND RESEARCH (2021)
Topology optimization of 3D-printed structurally porous cage for acetabular reinforcement in total hip arthroplasty
Ahmed Moussa et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
Acetabular defect classification and management Revision arthroplasty of the acetabular cup based on 3-point fixation
Mohamed Ghanem et al.
ORTHOPADE (2020)
High Hip Center Technique in Total Hip Arthroplasty for Crowe TypeII-IIIDevelopmental Dysplasia: Results of Midterm Follow-up
Junmin Shen et al.
ORTHOPAEDIC SURGERY (2020)
Surgery simulation teaching based on real reconstruction aid versus traditional surgical live teaching in the acquisition of an adult total hip arthroplasty surgical technique for developmental dysplasia of the hip: a randomized comparative study
Chenggong Wang et al.
BMC MEDICAL EDUCATION (2020)
Primary Stability of Revision Acetabular Reconstructions Using an Innovative Bone Graft Substitute: A Comparative Biomechanical Study on Cadaveric Pelvises
Federico Morosato et al.
MATERIALS (2020)
Reconstruction of acetabular defects with porous tantalum shells and augments in revision total hip arthroplasty at ten-year follow-up
J. Loechel et al.
BONE & JOINT JOURNAL (2019)
Biomechanical behaviours of the bone-implant interface: a review
Xing Gao et al.
JOURNAL OF THE ROYAL SOCIETY INTERFACE (2019)
Application of Acetabular Reinforcement Ring with Hook for Correction of Segmental Acetabular Rim Defects during Total Hip Arthroplasty Revision
Jianlin Xiao et al.
JOURNAL OF BIONIC ENGINEERING (2018)
Comparison of the stability of three fixation techniques between porous metal acetabular components and augments
N. A. Beckmann et al.
BONE & JOINT RESEARCH (2018)
Long-term follow-up of fibular graft for the reconstruction of bone defects
Siyi Liu et al.
MEDICINE (2018)
Current Concepts in Acetabular Positioning in Total Hip Arthroplasty
Deepu Bhaskar et al.
INDIAN JOURNAL OF ORTHOPAEDICS (2017)
Challenges in Total Hip Arthroplasty in the Setting of Developmental Dysplasia of the Hip
Eric M. Greber et al.
JOURNAL OF ARTHROPLASTY (2017)
Bone ingrowth around porous-coated acetabular implant: a three-dimensional finite element study using mechanoregulatory algorithm
Kaushik Mukherjee et al.
BIOMECHANICS AND MODELING IN MECHANOBIOLOGY (2016)
Does the optimal position of the acetabular fragment should be within the radiological normal range for all developmental dysplasia of the hip? A patient-specific finite element analysis
Xuyi Wang et al.
JOURNAL OF ORTHOPAEDIC SURGERY AND RESEARCH (2016)
Tritanium acetabular wedge augments: short-term results
Camilo Restrepo et al.
ANNALS OF TRANSLATIONAL MEDICINE (2016)
Fate of bone grafting for acetabular defects in total hip replacement
Anil Thomas Oommen et al.
INDIAN JOURNAL OF ORTHOPAEDICS (2015)
Is My Model Good Enough? Best Practices for Verification and Validation of Musculoskeletal Models and Simulations of Movement
Jennifer L. Hicks et al.
JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2015)
Factors influencing initial cup stability in total hip arthroplasty
Farid Amirouche et al.
CLINICAL BIOMECHANICS (2014)
Specimen-specific modeling of hip fracture pattern and repair
Azhar A. Ali et al.
JOURNAL OF BIOMECHANICS (2014)
Current concept in dysplastic hip arthroplasty: Techniques for acetabular and femoral reconstruction
Goran Bicanic et al.
WORLD JOURNAL OF ORTHOPEDICS (2014)
Displacement of the Hip Center of Rotation After Arthroplasty of Crowe III and IV Dysplasia: A Radiological and Biomechanical Study
Mansour Abolghasemian et al.
JOURNAL OF ARTHROPLASTY (2013)
Effect of Acetabular Reinforcement Ring With Hook for Acetabular Dysplasia Clarified by Three-Dimensional Finite Element Analysis
Xin Zhao et al.
JOURNAL OF ARTHROPLASTY (2013)
Optimization of the position of the acetabulum in a ganz periacetabular osteotomy by finite element analysis
Zhenmin Zou et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2013)
Porous metal augments BIG HOPES FOR BIG HOLES
M. Abolghasemian et al.
BONE & JOINT JOURNAL (2013)
The effect of lubrication on the friction and wear of Biolox®delta
L. Ma et al.
ACTA BIOMATERIALIA (2012)
Validation of FE Micromotions and Strains Around a Press-Fit Cup: Introducing a New Micromotion Measuring Technique
S. G. Clarke et al.
ANNALS OF BIOMEDICAL ENGINEERING (2012)
Acetabular Considerations During Total Hip Arthroplasty for Hip Dysplasia
Michele R. Dapuzzo et al.
ORTHOPEDIC CLINICS OF NORTH AMERICA (2012)
In Brief Crowe's Classification Arthroplasty in Developmental Dysplasia of the Hip
Muhammad Umar Jawad et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2011)
The Results of a Press-Fit-Only Technique for Acetabular Fixation in Hip Dysplasia
Masaki Takao et al.
JOURNAL OF ARTHROPLASTY (2011)
High Long-term Survival of Bulk Femoral Head Autograft for Acetabular Reconstruction in Cementless THA for Developmental Hip Dysplasia
Mitsunari Kim et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2010)
An accurate estimation of bone density improves the accuracy of subject-specific finite element models
Enrico Schileo et al.
JOURNAL OF BIOMECHANICS (2008)
Bone ingrowth into a porous coated implant predicted by a mechano-regulatory tissue differentiation algorithm
Xiangyi Liu et al.
BIOMECHANICS AND MODELING IN MECHANOBIOLOGY (2008)
Position of the acetabular component determines the fate of femoral head autografts in total hip replacement for acetabular dysplasia
B. Atilla et al.
JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME (2007)
Subject-specific finite element model of the pelvis: Development, validation and sensitivity studies
AE Anderson et al.
JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2005)