4.8 Article

Operation of liquid e-fuel cells using air as oxidant

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Nanoscience & Nanotechnology

A Passive Fuel Cell Fed with an Electrically Rechargeable Liquid Fuel

Xingyi Shi et al.

Summary: Passive fuel cells that use diffusion and natural convection for fuel delivery are considered promising for powering portable devices, while those using typical liquid alcohol fuels still face performance limitations that hinder commercialization. The introduction of electrically rechargeable liquid fuel (e-fuel) as a novel concept has drawn attention for its rechargeability, cost-effectiveness, and superior reactivity. A passive fuel cell using e-fuel and ambient air for electricity production has been designed and shown to achieve a peak power density of 116.2 mW cm(-2) and stable operation for over 350 hours, indicating great potential for future applications.

ACS APPLIED MATERIALS & INTERFACES (2021)

Review Energy & Fuels

Effects of temperature on the performance of fuel cell hybrid electric vehicles: A review

Zhen Song et al.

Summary: Fuel cell hybrid electric vehicles, powered by both fuel cell and lithium-ion battery, have been recognized as a potential alternative to internal combustion vehicles due to their high energy density and conversion efficiency. Energy management and thermal management are critical for stable power output, and strategies integrating temperature effects are crucial for improving efficiency and service life.

APPLIED ENERGY (2021)

Article Chemistry, Physical

Experimental measurements of fuel and water crossover in an active DMFC

Xianglin Li et al.

Summary: This study investigated the performance of an active direct methanol fuel cell (DMFC) operating at around 80 degrees C with active controls of temperature, methanol concentration, airflow rate, and relative humidity. The study found that adding a hydrophobic water management layer (WML) between the membrane electrode assembly (MEA) and cathode air channel increased peak power density, decreased ohmic resistance, and improved fuel efficiency, especially at higher temperatures. Additionally, using a hydrophobic fuel management layer (FML) between the anode fuel channel and MEA reduced fuel and water crossover rates and increased ohmic resistance, leading to improved fuel efficiency by reducing methanol crossover.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Energy & Fuels

Performance characteristics of a liquid e-fuel cell

Xingyi Shi et al.

Summary: The liquid e-fuel cell shows significant improvement in performance parameters such as energy density, current density, and energy efficiency compared to conventional liquid fuel cells. This opens up opportunities for breakthroughs in fuel cell technology.

APPLIED ENERGY (2021)

Article Engineering, Chemical

The role of ion exchange membrane in vanadium oxygen fuel cell

Jiri Charvat et al.

Summary: The study investigated the effect of different thickness and ion exchange capacity of commercial ion exchange membranes on the performance of vanadium-oxygen fuel cells, indicating that the membrane mainly affects fuel cell performance through water management in the catalytic layer of the gas diffusion cathode. Membranes with higher conductivity showed better performance stability, primarily due to their improved ability to drain water from the cathode, preventing flooding of the cathodic catalytic layer.

JOURNAL OF MEMBRANE SCIENCE (2021)

Article Chemistry, Physical

A computational model of a liquid e-fuel cell

Oladapo Christopher Esan et al.

Summary: A new energy storage system utilizing electrically rechargeable liquid fuels has been proposed. A model for a liquid e-fuel cell was developed to study the effects of operation variables and design parameters on cell performance. Increasing e-fuel concentration, sulfuric acid concentration, and flow rate improves cell performance, while membrane thickness degrades performance.

JOURNAL OF POWER SOURCES (2021)

Article Energy & Fuels

Control logics and strategies for air supply in PEM fuel cell engines

Junbo Hou et al.

APPLIED ENERGY (2020)

Review Chemistry, Physical

Modeling and Simulation of Flow Batteries

Oladapo Christopher Esan et al.

ADVANCED ENERGY MATERIALS (2020)

Article Chemistry, Multidisciplinary

Energizing Fuel Cells with an Electrically Rechargeable Liquid Fuel

Xingyi Shi et al.

CELL REPORTS PHYSICAL SCIENCE (2020)

Article Chemistry, Physical

Parametric study on direct ethanol fuel cell (DEFC) performance and fuel crossover

A. M. I. N. Azam et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Review Chemistry, Physical

Direct liquid fuel cells: A review

B. C. Ong et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Editorial Material Multidisciplinary Sciences

Prospects of fuel cell technologies

Shuangyin Wang et al.

NATIONAL SCIENCE REVIEW (2017)

Review Chemistry, Physical

Direct formate fuel cells: A review

L. An et al.

JOURNAL OF POWER SOURCES (2016)

Editorial Material Multidisciplinary Sciences

Reimagine fuel cells

John P. Lemmon

NATURE (2015)

Article Chemistry, Physical

A parametric study of the direct formic acid fuel cell (DFAFC) performance and fuel crossover

Siti Zuulaika Rejal et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

Article Chemistry, Physical

A coupled-physics model for the vanadium oxygen fuel cell

F. T. Wandschneider et al.

JOURNAL OF POWER SOURCES (2014)

Article Chemistry, Physical

An optimal strategy of electrolyte flow rate for vanadium redox flow battery

Xiangkun Ma et al.

JOURNAL OF POWER SOURCES (2012)

Review Multidisciplinary Sciences

Opportunities and challenges for a sustainable energy future

Steven Chu et al.

NATURE (2012)

Article Chemistry, Physical

Performance of an alkaline-acid direct ethanol fuel cell

L. An et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)

Article Chemistry, Physical

A high-performance integrated electrode for anion-exchange membrane direct ethanol fuel cells

Y. S. Li et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)

Article Chemistry, Physical

A novel direct ethanol fuel cell with high power density

L. An et al.

JOURNAL OF POWER SOURCES (2011)

Review Thermodynamics

Mass transport phenomena in direct methanol fuel cells

T. S. Zhao et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2009)

Article Chemistry, Physical

Characterisation of a portable DMFC stack and a methanol-feeding concept

Anders Oedegaard et al.

JOURNAL OF POWER SOURCES (2006)