相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Assessing Leachable Cytotoxicity of 3D-Printed Polymers and Facile Detoxification Methods
Venkatakrishnan Rengarajan et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2023)
Quantitative Determination of 3D-Printing and Surface-Treatment Conditions for Direct-Printed Microfluidic Devices
Hyun Namgung et al.
BIOCHIP JOURNAL (2022)
3D printing in biotechnology-An insight into miniaturized and microfluidic systems for applications from cell culture to bioanalytics
Christopher Heuer et al.
ENGINEERING IN LIFE SCIENCES (2022)
Microscale impeller pump for recirculating flow in organs-on-chip and microreactors
Sophie R. Cook et al.
LAB ON A CHIP (2022)
In-situ transfer vat photopolymerization for transparent microfluidic device fabrication
Yang Xu et al.
NATURE COMMUNICATIONS (2022)
Performance evaluation of 3D printing technologies: a review, recent advances, current challenges, and future directions
Utkarsh Chadha et al.
PROGRESS IN ADDITIVE MANUFACTURING (2022)
Compatibility of Popular Three-Dimensional Printed Microfluidics Materials with In Vitro Enzymatic Reactions
Wan-Zhen Sophie Lin et al.
ACS APPLIED BIO MATERIALS (2022)
Microfluidic devices manufacturing with a stereolithographic printer for biological applications
Bastian Carnero et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)
Detergent wash improves vaccinated lymph node handling ex vivo
Alexander G. Ball et al.
JOURNAL OF IMMUNOLOGICAL METHODS (2021)
PDMS Curing Inhibition on 3D-Printed Molds: Why? Also, How to Avoid It?
Bastien Venzac et al.
ANALYTICAL CHEMISTRY (2021)
Will it print: a manufacturability toolbox for 3D printing
Hannah D. Budinoff et al.
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM (2021)
Selective Fluorination of the Surface of Polymeric Materials after Stereolithography 3D Printing
Megan A. Catterton et al.
LANGMUIR (2021)
Spatially and optically tailored 3D printing for highly miniaturized and integrated microfluidics
Jose L. Sanchez Noriega et al.
NATURE COMMUNICATIONS (2021)
3D Printed Microfluidics
Anna V. Nielsen et al.
ANNUAL REVIEW OF ANALYTICAL CHEMISTRY, VOL 13 (2020)
Printability of External and Internal Structures Based on Digital Light Processing 3D Printing Technique
Yan Yang et al.
PHARMACEUTICS (2020)
A dog oviduct-on-a-chip model of serous tubal intraepithelial carcinoma
Marcia de Almeida Monteiro Melo Ferraz et al.
SCIENTIFIC REPORTS (2020)
Fabrication of Complex 3D Fluidic Networks via Modularized Stereolithography
Terry Ching et al.
ADVANCED ENGINEERING MATERIALS (2020)
Sealing 3D-printed parts to poly(dimethylsiloxane) for simple fabrication of Microfluidic devices
Cody S. Carrell et al.
ANALYTICA CHIMICA ACTA (2020)
Emerging Applications of Additive Manufacturing in Biosensors and Bioanalytical Devices
Xiaofan Ruan et al.
ADVANCED MATERIALS TECHNOLOGIES (2020)
A practical guide to rapid-prototyping of PDMS-based microfluidic devices: A tutorial
Giorgio Gianini Morbioli et al.
ANALYTICA CHIMICA ACTA (2020)
3D Printing of Cell Culture Devices: Assessment and Prevention of the Cytotoxicity of Photopolymers for Stereolithography
Sebastian Kress et al.
MATERIALS (2020)
Recent Advances in Formulating and Processing Biomaterial Inks for Vat Polymerization-Based 3D Printing
Wanlu Li et al.
ADVANCED HEALTHCARE MATERIALS (2020)
Materials Testing for the Development of Biocompatible Devices through Vat-Polymerization 3D Printing
Gustavo Gonzalez et al.
NANOMATERIALS (2020)
Biocompatibility of Blank, Post-Processed and Coated 3D Printed Resin Structures with Electrogenic Cells
Cacie Hart et al.
BIOSENSORS-BASEL (2020)
Biocompatible PEGDA Resin for 3D Printing
Chandler Warr et al.
ACS APPLIED BIO MATERIALS (2020)
Accurate and rapid 3D printing of microfluidic devices using wavelength selection on a DLP printer
Peter J. E. M. van der Linden et al.
LAB ON A CHIP (2020)
3D-printed Bioreactors for In Vitro Modeling and Analysis
Balasankar Meera Priyadarshini et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2020)
Vat polymerization-based bioprinting-process, materials, applications and regulatory challenges
Wei Long Ng et al.
BIOFABRICATION (2020)
Photopolymerization in 3D Printing
Ali Bagheri et al.
ACS APPLIED POLYMER MATERIALS (2019)
Feasibility and Biocompatibility of 3D-Printed Photopolymerized and Laser Sintered Polymers for Neuronal, Myogenic, and Hepatic Cell Types
Rowan P. Rimington et al.
MACROMOLECULAR BIOSCIENCE (2018)
A Fluidic Culture Platform for Spatially Patterned Cell Growth, Differentiation, and Cocultures
Josephine Lembong et al.
TISSUE ENGINEERING PART A (2018)
3D Printed Microfluidic Features Using Dose Control in X, Y, and Z Dimensions
Michael J. Beauchamp et al.
MICROMACHINES (2018)
3D-Printed Chips: Compatibility of Additive Manufacturing Photopolymeric Substrata with Biological Applications
Megan Carve et al.
MICROMACHINES (2018)
3D Printed Microfluidic Probes
Ayoola Brimmo et al.
SCIENTIFIC REPORTS (2018)
Advances in Optical Sensing and Bioanalysis Enabled by 3D Printing
Alexander Lambert et al.
ACS SENSORS (2018)
A Review of Current Methods in Microfluidic Device Fabrication and Future Commercialization Prospects
Bruce K. Gale et al.
INVENTIONS (2018)
PDMS-Based Microfluidic Devices for Cell Culture
Stefania Torino et al.
INVENTIONS (2018)
Custom 3D printer and resin for 18 μm x 20 μm microfluidic flow channels
Hua Gong et al.
LAB ON A CHIP (2017)
Mimicking arterial thrombosis in a 3D-printed microfluidic in vitro vascular model based on computed tomography angiography data
Pedro F. Costa et al.
LAB ON A CHIP (2017)
Rapid prototyping using 3D printing in bioanalytical research
Chengsen Zhang et al.
BIOANALYSIS (2017)
In vitro cytotoxic effects of DEHP-alternative plasticizers and their primary metabolites on a L929 cell line
Teuta Eljezi et al.
CHEMOSPHERE (2017)
Simple, Cost-Effective 3D Printed Microfluidic Components for Disposable, Point-of-Care Colorimetric Analysis
Ho Nam Chan et al.
ACS SENSORS (2016)
3D-printing of transparent bio-microfluidic devices in PEG-DA
Arturo Urrios et al.
LAB ON A CHIP (2016)
3D printed microfluidic devices: enablers and barriers
Sidra Waheed et al.
LAB ON A CHIP (2016)
The upcoming 3D-printing revolution in microfluidics
Nirveek Bhattacharjee et al.
LAB ON A CHIP (2016)
3D printing: an emerging tool for novel microfluidics and lab-on-a-chip applications
Alireza Ahmadian Yazdi et al.
MICROFLUIDICS AND NANOFLUIDICS (2016)
3D-printed bioanalytical devices
Gregory W. Bishop et al.
NANOTECHNOLOGY (2016)
Development of Aptamer-Based Point-of-Care Diagnostic Devices for Malaria Using Three-Dimensional Printing Rapid Prototyping
Roderick M. Dirkzwager et al.
ACS SENSORS (2016)
Monitoring of the Shrinkage during the Photopolymerization of Acrylates Using Hyphenated Photorheometry/Near-Infrared Spectroscopy
Christian Schmidt et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2015)
Fabrication of biocompatible lab-on-chip devices for biomedical applications by means of a 3D-printing process
S. Takenaga et al.
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2015)
Optical approach to resin formulation for 3D printed microfluidics
Hua Gong et al.
RSC ADVANCES (2015)
Accounting for future redesign to balance performance and development costs
D. Villanueva et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2014)
Variable cytocompatibility of six cell lines with photoinitiators used for polymerizing hydrogels and cell encapsulation
CG Williams et al.
BIOMATERIALS (2005)
Neutrophil survival on biomaterials is determined by surface topography
S Chang et al.
JOURNAL OF VASCULAR SURGERY (2003)