相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Biomimetic and Biologically Compliant Soft Architectures via 3D and 4D Assembly Methods: A Perspective
Jay M. Taylor et al.
ADVANCED MATERIALS (2022)
Direct Ink Writing of Polymer Composite Electrolytes with Enhanced Thermal Conductivities
Meng Cheng et al.
ADVANCED FUNCTIONAL MATERIALS (2021)
3D-printed multifunctional materials enabled by artificial-intelligence-assisted fabrication technologies
Zhijie Zhu et al.
NATURE REVIEWS MATERIALS (2021)
Extraction of material properties through multi-fidelity deep learning from molecular dynamics simulation
Mahmudul Islam et al.
COMPUTATIONAL MATERIALS SCIENCE (2021)
Direct coherent multi-ink printing of fabric supercapacitors
Jingxin Zhao et al.
SCIENCE ADVANCES (2021)
Mechanics of nozzle clogging during direct ink writing of fiber-reinforced composites
Brendan P. Croom et al.
ADDITIVE MANUFACTURING (2021)
Magnetic properties of bulk nanocrystalline cobalt ferrite obtained by high-pressure field assisted sintering
Angelica Baldini et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2021)
Additive manufacturing of advanced ceramic materials
Y. Lakhdar et al.
PROGRESS IN MATERIALS SCIENCE (2021)
Direct ink writing of metal parts with curing by UV light irradiation
Haojie Wang et al.
MATERIALS TODAY COMMUNICATIONS (2021)
Three-dimensional printing of complex graphite structures
Seyed Mohammad Sajadi et al.
CARBON (2021)
Direct writing of customized structural-color graphics with colloidal photonic inks
Jong Bin Kim et al.
SCIENCE ADVANCES (2021)
Direct ink writing of hierarchical porous ultra-high temperature ceramics (ZrB2)
Mitchell L. Sesso et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2021)
3D Printable Conducting and Biocompatible PEDOT-graft-PLA Copolymers by Direct Ink Writing
Antonio Dominguez-Alfaro et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2021)
Direct Ink Writing of Materials for Electronics-Related Applications: A Mini Review
Zhenzhong Hou et al.
FRONTIERS IN MATERIALS (2021)
3D printing of reduced graphene oxide aerogels for energy storage devices: A paradigm from materials and technologies to applications
Binbin Guo et al.
ENERGY STORAGE MATERIALS (2021)
Precision cooking for printed foods via multiwavelength lasers
Jonathan David Blutinger et al.
NPJ SCIENCE OF FOOD (2021)
State of the art direct ink writing (DIW) and experimental trial on DIW of HAp bio-ceramics
A. J. Ashwin et al.
MATERIALS TODAY-PROCEEDINGS (2021)
A concise review on 4D printing technology
D. Saritha et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Direct ink writing of energy materials
S. Tagliaferri et al.
MATERIALS ADVANCES (2021)
Additive manufacturing of composites made of epoxy resin with magnetite particles fabricated with the direct ink writing technique
Jose J. Restrepo et al.
JOURNAL OF COMPOSITE MATERIALS (2020)
Extrusion-based additive manufacturing of yttria-partially-stabilized zirconia ceramics
Tianyu Yu et al.
CERAMICS INTERNATIONAL (2020)
4D Printing of High-Performance Thermal-Responsive Liquid Metal Elastomers Driven by Embedded Microliquid Chambers
Lu-yu Zhou et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
3D Printing of Additive-Free 2D Ti3C2Tx (MXene) Ink for Fabrication of Micro-Supercapacitors with Ultra-High Energy Densities
Jafar Orangi et al.
ACS NANO (2020)
Fabrication of Si2N2O Ceramic Foam by Combination of Direct Ink Writing and Biological Foaming Techniques
Haize Jin et al.
ADVANCED ENGINEERING MATERIALS (2020)
3D-Printed Structure Boosts the Kinetics and Intrinsic Capacitance of Pseudocapacitive Graphene Aerogels
Bin Yao et al.
ADVANCED MATERIALS (2020)
High thermal conductive epoxy based composites fabricated by multi-material direct ink writing
Junchao Liu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Modification of pore-wall in direct ink writing wollastonite scaffolds favorable for tuning biodegradation and mechanical stability and enhancing osteogenic capability
Xiurong Ke et al.
FASEB JOURNAL (2020)
A composite neural network that learns from multi-fidelity data: Application to function approximation and inverse PDE problems
Xuhui Meng et al.
JOURNAL OF COMPUTATIONAL PHYSICS (2020)
Boron nitride-reinforced polysilazane-derived ceramic composites via direct-ink writing
James W. Kemp et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)
Direct ink writing core-shell Wollastonite@Diopside scaffolds with tailorable shell micropores favorable for optimizing physicochemical and biodegradation properties
Jianhua Shen et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Three-dimensional hierarchical nanoporous copper via direct ink writing and dealloying
Shahryar Mooraj et al.
SCRIPTA MATERIALIA (2020)
Direct-Write Printing Copper-Nickel (Cu/Ni) Alloy with Controlled Composition from a Single Electrolyte Using Co-Electrodeposition
Chao Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Strong Macroscale Supercrystalline Structures by 3D Printing Combined with Self-Assembly of Ceramic Functionalized Nanoparticles
Berta Domenech et al.
ADVANCED ENGINEERING MATERIALS (2020)
4D Printing of Hydrogels: A Review
Mathilde Champeau et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Tunable Biomimetic Hydrogels from Silk Fibroin and Nanocellulose
Pramod Dorishetty et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)
Direct Ink Writing Glass: A Preliminary Step for Optical Application
Bo Nan et al.
MATERIALS (2020)
Formulation of Sugar/Hydrogel Inks for Rapid Thermal Response 4D Architectures with Sugar-derived Macropores
Hyojin Ko et al.
SCIENTIFIC REPORTS (2020)
Additive manufacturing of short fiber reinforced thermoset composites with unprecedented mechanical performance
Nashat Nawafleh et al.
ADDITIVE MANUFACTURING (2020)
Complex SiOC ceramics from 2D structures by 3D printing and origami
Kai Huang et al.
ADDITIVE MANUFACTURING (2020)
Reactive 3D Printing of Shape-Programmable Liquid Crystal Elastomer Actuators
Morgan Barnes et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Direct ink writing of surface-modified flax elastomer composites
Yizhou Jiang et al.
COMPOSITES PART B-ENGINEERING (2020)
Additive manufacturing of Portland cement pastes with additions of kaolin, superplastificant and calcium carbonate
Luis A. Vergara et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Direct Ink Writing Technology (3D Printing) of Graphene-Based Ceramic Nanocomposites: A Review
Nestor Washington Solis Pinargote et al.
NANOMATERIALS (2020)
Direct Ink Writing Based 4D Printing of Materials and Their Applications
Xue Wan et al.
ADVANCED SCIENCE (2020)
Liquid Metal Direct Write and 3D Printing: A Review
Taylor V. Neumann et al.
ADVANCED MATERIALS TECHNOLOGIES (2020)
Direct Ink Writing of a Light-Responsive Underwater Liquid Crystal Actuator with Atypical Temperature-Dependent Shape Changes
Marc del Pozo et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Feasibility study of hydrocolloid incorporated 3D printed pork as dysphagia food
Arianna Dick et al.
FOOD HYDROCOLLOIDS (2020)
3D printing of multi-scalable structures via high penetration near-infrared photopolymerization
Junzhe Zhu et al.
NATURE COMMUNICATIONS (2020)
Additive manufacturing of silica aerogels
Shanyu Zhao et al.
NATURE (2020)
Three-dimensional printing of functionally graded liquid crystal elastomer
Zijun Wang et al.
SCIENCE ADVANCES (2020)
3D printed self-supporting elastomeric structures for multifunctional microfluidics
Ruitao Su et al.
SCIENCE ADVANCES (2020)
3D ink-extrusion printing and sintering of Ti, Ti-TiB and Ti-TiC microlattices
Binna Song et al.
ADDITIVE MANUFACTURING (2020)
Photopolymerization of Macroscale Black 3D Objects Using Near-Infrared Photochemistry
Xiucheng Zou et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
3D Printing of Dual-Physical Cross-linking Hydrogel with Ultrahigh Strength and Toughness
Pan Jiang et al.
CHEMISTRY OF MATERIALS (2020)
SnO2-Ag composites with high thermal cycling stability created by Ag infiltration of 3D ink-extruded SnO2 microlattices
Pengyu Chen et al.
APPLIED MATERIALS TODAY (2020)
3D-printed tungsten sheet-gyroids via reduction and sintering of extruded WO3-nanopowder inks
Christoph Kenel et al.
ADDITIVE MANUFACTURING (2020)
3D food printing of as the new way of preparing food: A review
Sylvester Mantihal et al.
INTERNATIONAL JOURNAL OF GASTRONOMY AND FOOD SCIENCE (2020)
3D printing of food materials: A state of art review and future applications
Piyush et al.
MATERIALS TODAY-PROCEEDINGS (2020)
3D printing of milk-based product
Cheng Pau Lee et al.
RSC ADVANCES (2020)
Direct ink writing advances in multi-material structures for a sustainable future
Victoria G. Rocha et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Current advances and future perspectives of 3D printing natural-derived biopolymers
Jun Liu et al.
CARBOHYDRATE POLYMERS (2019)
Mechanical Properties of Printed Epoxy-Carbon Fiber Composites
H. A. Pierson et al.
EXPERIMENTAL MECHANICS (2019)
Effect of hydrocolloid addition on dimensional stability in post-processing of 3D printable cookie dough
Hyun Woo Kim et al.
LWT-FOOD SCIENCE AND TECHNOLOGY (2019)
A biocompatible thermoset polymer binder for Direct Ink Writing of porous titanium scaffolds for bone tissue engineering
Yunhui Chen et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
3D ink-extrusion additive manufacturing of CoCrFeNi high-entropy alloy micro-lattices
Christoph Kenel et al.
NATURE COMMUNICATIONS (2019)
Direct Wiring of Eutectic Gallium-Indium to a Metal Electrode for Soft Sensor Systems
Suin Kim et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Omnidirectional Printing of Soft Elastomer for Liquid-State Stretchable Electronics
Jiachen Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Long Liquid Crystal Elastomer Fibers with Large Reversible Actuation Strains for Smart Textiles and Artificial Muscles
Devin J. Roach et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam
Qiyi Chen et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Three-Dimensional, High-Resolution Printing of Carbon Nanotube/Liquid Metal Composites with Mechanical and Electrical Reinforcement
Young-Geun Park et al.
NANO LETTERS (2019)
Microstructure and mechanical property of Cf/SiC core/shell composite fabricated by direct ink writing
Yuanlin Xia et al.
SCRIPTA MATERIALIA (2019)
3D printing of hybrid MoS2-graphene aerogels as highly porous electrode materials for sodium ion battery anodes
Emery Brown et al.
MATERIALS & DESIGN (2019)
Active Mixing of Disparate Inks for Multimaterial 3D Printing
Jason M. Ortega et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Direct 3D Printing of Hybrid Nanofiber-Based Nanocomposites for Highly Conductive and Shape Memory Applications
Hongqiu Wei et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Electrowetting-Assisted Selective Printing of Liquid Metal
Alexander M. Watson et al.
ADVANCED ENGINEERING MATERIALS (2019)
A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders
Tamar Rosental et al.
ADVANCED ENGINEERING MATERIALS (2019)
3D Printing of Freestanding MXene Architectures for Current-Collector-Free Supercapacitors
Wenji Yang et al.
ADVANCED MATERIALS (2019)
Micro/Nanoscale 3D Assembly by Rolling, Folding, Curving, and Buckling Approaches
Xu Cheng et al.
ADVANCED MATERIALS (2019)
3D Printing of Salt as a Template for Magnesium with Structured Porosity
Nicole Kleger et al.
ADVANCED MATERIALS (2019)
Novel strategy for toughening robocast bioceramic scaffolds using polymeric cores
Claudia Paredes et al.
CERAMICS INTERNATIONAL (2019)
3D printing of shape memory poly(d,l-lactide-co-trimethylene carbonate) by direct ink writing for shape-changing structures
Xue Wan et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2019)
In Operando Monitoring of Dynamic Recovery in 3D-Printed Thermoset Nanocomposites by XPCS
Kyle J. Johnson et al.
LANGMUIR (2019)
Additive-free MXene inks and direct printing of micro-supercapacitors
Chuanfang (John) Zhang et al.
NATURE COMMUNICATIONS (2019)
Versatile N-Doped MXene Ink for Printed Electrochemical Energy Storage Application
Lianghao Yu et al.
ADVANCED ENERGY MATERIALS (2019)
High-resolution, reconfigurable printing of liquid metals with three-dimensional structures
Young-Geun Park et al.
SCIENCE ADVANCES (2019)
3D food printing: a categorised review of inks and their development
Siew Li Voon et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2019)
Periodic buckling of soft 3D printed bioinspired tubes
Jiayu Liu et al.
EXTREME MECHANICS LETTERS (2019)
The Rise of MXenes
Yury Gogotsi et al.
ACS NANO (2019)
Digital Printing of Solid-State Lithium-Ion Batteries
L. Jay Deiner et al.
ADVANCED ENGINEERING MATERIALS (2019)
Architected Polymer Foams via Direct Bubble Writing
Claas Willem Visser et al.
ADVANCED MATERIALS (2019)
Highly Stretchable Photonic Crystal Hydrogels for a Sensitive Mechanochromic Sensor and Direct Ink Writing
Jiayao Chen et al.
CHEMISTRY OF MATERIALS (2019)
Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels
Mark A. Skylar-Scott et al.
SCIENCE ADVANCES (2019)
Direct ink writing of three dimensional Ti2AlC porous structures
Hamada Elsayed et al.
ADDITIVE MANUFACTURING (2019)
4D Printing of a Liquid Crystal Elastomer with a Controllable Orientation Gradient
Chun Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Direct-Ink-Write 3D Printing of Hydrogels into Biomimetic Soft Robots
Yin Cheng et al.
ACS NANO (2019)
Stiff reconfigurable polygons for smart connecters and deployable structures
Zeang Zhao et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Direct ink writing of porous titanium (Ti6Al4V) lattice structures
Hamada Elsayed et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Voxelated soft matter via multimaterial multinozzle 3D printing
Mark A. Skylar-Scott et al.
NATURE (2019)
Fabricating 3D Structures by Combining 2D Printing and Relaxation of Strain
Brian J. Cafferty et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Highly Porous Sr/Mg-Doped Hardystonite Bioceramics from Preceramic Polymers and Reactive Fillers: Direct Foaming and Direct Ink Writing
Hamada Elsayed et al.
ADVANCED ENGINEERING MATERIALS (2019)
Full 3D Printing of Stretchable Piezoresistive Sensor with Hierarchical Porosity and Multimodulus Architecture
Ziya Wang et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators
Mohand O. Saed et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Chocolate-based Ink Three-dimensional Printing (Ci3DP)
Rahul Karyappa et al.
SCIENTIFIC REPORTS (2019)
Additively manufacturing high-performance bismaleimide architectures with ultraviolet-assisted direct ink writing
Tao Wu et al.
MATERIALS & DESIGN (2019)
Textural modification of 3D printed dark chocolate by varying internal infill structure
Sylvester Mantihal et al.
FOOD RESEARCH INTERNATIONAL (2019)
Extrusion-based 3D printing of food pastes: Correlating rheological properties with printing behaviour
Sicong Zhu et al.
INNOVATIVE FOOD SCIENCE & EMERGING TECHNOLOGIES (2019)
3D printing of ceramics: A review
Zhangwei Chen et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Self Assembly-Assisted Additive Manufacturing: Direct Ink Write 3D Printing of Epoxy-Amine Thermosets
Kylie B. Manning et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2019)
3D-Printed Hydrogel Composites for Predictive Temporal (4D) Cellular Organizations and Patterned Biogenic Mineralization
Joselle M. McCracken et al.
ADVANCED HEALTHCARE MATERIALS (2019)
Bidirectional and Stretchable Piezoresistive Sensors Enabled by Multimaterial 3D Printing of Carbon Nanotube/Thermoplastic Polyurethane Nanocomposites
Josef F. Christ et al.
POLYMERS (2019)
Four Degrees-of-Freedom Direct Writing of Liquid Metal Patterns on Uneven Surfaces
Young Yoon et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Multi-Material Direct Ink Writing (DIW) for Complex 3D Metallic Structures with Removable Supports
Chao Xu et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Dual-Gel 4D Printing of Bioinspired Tubes
Jiayu Liu et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Direct Ink Writing of High Performance Architectured Polyimides with Low Dimensional Shrinkage
Yuxiong Guo et al.
ADVANCED ENGINEERING MATERIALS (2019)
Direct Ink Writing of Cement Structures Modified with Nanoscale Additive
Seyed Mohammad Sajadi et al.
ADVANCED ENGINEERING MATERIALS (2019)
3D Printing of Multifunctional Hydrogels
Zhe Chen et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
A Versatile Approach for Direct Patterning of Liquid Metal Using Magnetic Field
Biao Ma et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Hydrogels from natural egg white with extraordinary stretchability, direct-writing 3D printability and self-healing for fabrication of electronic sensors and actuators
Qiang Chang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Efficient 3D Printed Pseudocapacitive Electrodes with Ultrahigh MnO2 Loading
Bin Yao et al.
JOULE (2019)
3D printing with 2D colloids: designing rheology protocols to predict printability' of soft-materials
Andrew Corker et al.
SOFT MATTER (2019)
Advances in crosslinking strategies of biomedical hydrogels
Weikang Hu et al.
BIOMATERIALS SCIENCE (2019)
Direct 3D printing of a graphene oxide hydrogel for fabrication of a high areal specific capacitance microsupercapacitor
Xiawei Yun et al.
RSC ADVANCES (2019)
Direct ink writing with high-strength and swelling-resistant biocompatible physically crosslinked hydrogels
Pan Jiang et al.
BIOMATERIALS SCIENCE (2019)
3D printing of thermoreversible polyurethanes with targeted shape memory and precise in situ self-healing properties
Yue Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing
Peiran Wei et al.
ACS APPLIED POLYMER MATERIALS (2019)
Direct-writing of vanadium dioxide/polydimethylsiloxane three-dimensional photonic crystals with thermally tunable terahertz properties
Rong Wang et al.
JOURNAL OF MATERIALS CHEMISTRY C (2019)
Recent Progress of Direct Ink Writing of Electronic Components for Advanced Wearable Devices
Yubai Zhang et al.
ACS APPLIED ELECTRONIC MATERIALS (2019)
Electrical and Mechanical Properties of 3D-Printed Graphene-Reinforced Epoxy
Brett G. Compton et al.
JOM (2018)
Custom Repair of Mandibular Bone Defects with 3D Printed Bioceramic Scaffolds
H. Shao et al.
JOURNAL OF DENTAL RESEARCH (2018)
Wiring up Liquid Metal: Stable and Robust Electrical Contacts Enabled by Printable Graphene Inks
Ethan B. Secor et al.
ADVANCED ELECTRONIC MATERIALS (2018)
Additive Manufacturing of Catalytically Active Living Materials
Abhijit Saha et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
3D Printing of Highly Stretchable, Shape-Memory, and Self-Healing Elastomer toward Novel 4D Printing
Xiao Kuang et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Generalized 3D Printing of Graphene-Based Mixed-Dimensional Hybrid Aerogels
Xingwei Tang et al.
ACS NANO (2018)
Patterned Liquid Metal Contacts for Printed Carbon Nanotube Transistors
Joseph B. Andrews et al.
ACS NANO (2018)
Dynamics of Cellulose Nanocrystal Alignment during 3D Printing
Michael K. Hausmann et al.
ACS NANO (2018)
Microstructure and Processing of 3D Printed Tungsten Microlattices and Infiltrated W-Cu Composites
Micha Calvo et al.
ADVANCED ENGINEERING MATERIALS (2018)
3D-Printed Biomimetic Scaffold Simulating Microfibril Muscle Structure
WonJin Kim et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Towards Sub-Microscale Liquid Metal Patterns: Cascade Phase Change Mediated Pick-n-Place Transfer of Liquid Metals Printed and Stretched over a Flexible Substrate
Doyoon Kim et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Direct 3D Printing of Ultralight Graphene Oxide Aerogel Microlattices
Yanqiu Jiang et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
3D Printing of Materials with Tunable Failure via Bioinspired Mechanical Gradients
Dimitri Kokkinis et al.
ADVANCED MATERIALS (2018)
Extrusion-Based 3D Printing of Hierarchically Porous Advanced Battery Electrodes
Steven D. Lacey et al.
ADVANCED MATERIALS (2018)
Architected Lattices with High Stiffness and Toughness via Multicore-Shell 3D Printing
Jochen Mueller et al.
ADVANCED MATERIALS (2018)
3D Printing of Customized Li-Ion Batteries with Thick Electrodes
Teng-Sing Wei et al.
ADVANCED MATERIALS (2018)
3D Printing of Liquid Crystal Elastomeric Actuators with Spatially Programed Nematic Order
Arda Kotikian et al.
ADVANCED MATERIALS (2018)
3D Printed Functional and Biological Materials on Moving Freeform Surfaces
Zhijie Zhu et al.
ADVANCED MATERIALS (2018)
Soft Robotics
George M. Whitesides
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)
Fresh and hardened properties of 3D printable cementitious materials for building and construction
Suvash Chandra Paul et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2018)
High-strength epoxy nanocomposites for 3D printing
Nadim S. Hmeidat et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Effect of Different Gums on Features of 3D Printed Object Based on Vitamin-D Enriched Orange Concentrate
Roknul S. M. Azam et al.
FOOD BIOPHYSICS (2018)
Effect of gums on the rheological, microstructural and extrusion printing characteristics of mashed potatoes
Zhenbin Liu et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)
Impact of rheological properties of mashed potatoes on 3D printing
Zhenbin Liu et al.
JOURNAL OF FOOD ENGINEERING (2018)
Investigation on fish surimi gel as promising food material for 3D printing
Lin Wang et al.
JOURNAL OF FOOD ENGINEERING (2018)
Direct ink writing of highly bioactive glasses
Amy Nommeots-Nomm et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)
Investigation on lemon juice gel as food material for 3D printing and optimization of printing parameters
Fanli Yang et al.
LWT-FOOD SCIENCE AND TECHNOLOGY (2018)
Three-dimensional printing of shape memory hydrogels with internal structure for drug delivery
Yongzhou Wang et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
Rotational 3D printing of damage-tolerant composites with programmable mechanics
Jordan R. Raney et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2018)
Fabrication of tough epoxy with shape memory effects by UV-assisted direct-ink write printing
Kaijuan Chen et al.
SOFT MATTER (2018)
3D printing of robotic soft actuators with programmable bioinspired architectures
Manuel Schaffner et al.
NATURE COMMUNICATIONS (2018)
3D Printing Quasi-Solid-State Asymmetric Micro-Supercapacitors with Ultrahigh Areal Energy Density
Kai Shen et al.
ADVANCED ENERGY MATERIALS (2018)
Optimization and Characterization of Preceramic Inks for Direct Ink Writing of Ceramic Matrix Composite Structures
Giorgia Franchin et al.
MATERIALS (2018)
4D Printing of Robust Hydrogels Consisted of Agarose Nanofibers and Polyacrylamide
Jinhua Guo et al.
ACS MACRO LETTERS (2018)
Direct Ink Write 3D Printed Cellulose Nanofiber Aerogel Structures with Highly Deformable, Shape Recoverable, and Functionalizable Properties
Vincent C. F. Li et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)
3D printing of high performance cyanate ester thermoset polymers
Swetha Chandrasekaran et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Three-dimensional ultraflexible triboelectric nanogenerator made by 3D printing
Baodong Chen et al.
NANO ENERGY (2018)
Direct Writing and Repairable Paper Flexible Electronics Using Nickel-Liquid Metal Ink
Hao Chang et al.
ADVANCED MATERIALS INTERFACES (2018)
3D printing of soft robotic systems
T. J. Wallin et al.
NATURE REVIEWS MATERIALS (2018)
Rheological Modification of Liquid Metal for Additive Manufacturing of Stretchable Electronics
Uranbileg Daalkhaijav et al.
ADVANCED MATERIALS TECHNOLOGIES (2018)
3D Printed Optical Quality Silica and Silica-Titania Glasses from Sol-Gel Feedstocks
Joel F. Destino et al.
ADVANCED MATERIALS TECHNOLOGIES (2018)
3D-printed bioceramic scaffolds: From bone tissue engineering to tumor therapy
Hongshi Ma et al.
ACTA BIOMATERIALIA (2018)
A Single Integrated 3D-Printing Process Customizes Elastic and Sustainable Triboelectric Nanogenerators for Wearable Electronics
Shuo Chen et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
3D Printed Stem-Cell Derived Neural Progenitors Generate Spinal Cord Scaffolds
Daeha Joung et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Additive Manufacturing and Performance of Architectured Cement-Based Materials
Mohamadreza Moini et al.
ADVANCED MATERIALS (2018)
Elevated-Temperature 3D Printing of Hybrid Solid-State Electrolyte for Li-Ion Batteries
Meng Cheng et al.
ADVANCED MATERIALS (2018)
Form and functional repair of long bone using 3D-printed bioactive scaffolds
Nick Tovar et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2018)
Rapid energy-efficient manufacturing of polymers and composites via frontal polymerization
Ian D. Robertson et al.
NATURE (2018)
Printing ferromagnetic domains for untethered fast-transforming soft materials
Yoonho Kim et al.
NATURE (2018)
Environment-friendly and reusable ink for 3D printing of metallic structures
Chao Xu et al.
MATERIALS & DESIGN (2018)
Origami and 4D printing of elastomer-derived ceramic structures
Guo Liu et al.
SCIENCE ADVANCES (2018)
Toward digitally controlled catalyst architectures: Hierarchical nanoporous gold via 3D printing
Cheng Zhu et al.
SCIENCE ADVANCES (2018)
Ultraviolet-Assisted Direct Ink Write to Additively Manufacture All-Aromatic Polyimides
Daniel A. Rau et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Novel ink for ambient condition printing of liquid crystal elastomers for 4D printing
Devin J. Roach et al.
SMART MATERIALS AND STRUCTURES (2018)
The development of 3D food printer for printing fibrous meat materials
C. Liu et al.
2017 2ND INTERNATIONAL CONFERENCE ON INNOVATIVE ENGINEERING MATERIALS (ICIEM 2017) (2018)
3D Printing of Living Responsive Materials and Devices
Xinyue Liu et al.
ADVANCED MATERIALS (2018)
3D printing of cereal-based food structures containing probiotics
Lu Zhang et al.
FOOD STRUCTURE-NETHERLANDS (2018)
Extrusion-based 3D food printing - Materials and machines
Cavin Tan et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2018)
Hydrogels as intelligent materials: A brief review of synthesis, properties and applications
Mostafa Mahinroosta et al.
MATERIALS TODAY CHEMISTRY (2018)
A New 3D Printing Strategy by Harnessing Deformation, Instability, and Fracture of Viscoelastic Inks
Hyunwoo Yuk et al.
ADVANCED MATERIALS (2018)
High-performance ceramic parts with complex shape prepared by selective laser sintering: a review
An-Nan Chen et al.
ADVANCES IN APPLIED CERAMICS (2018)
UV-assisted three-dimensional printing of polymer nanocomposites based on inorganic fillers
Giovanni Postiglione et al.
POLYMER COMPOSITES (2017)
Direct-Write Fabrication of 4D Active Shape-Changing Structures Based on a Shape Memory Polymer and Its Nanocomposite
Hongqiu Wei et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Rapid Continuous Multimaterial Extrusion Bioprinting
Wanjun Liu et al.
ADVANCED MATERIALS (2017)
High-Operating-Temperature Direct Ink Writing of Mesoscale Eutectic Architectures
J. William Boley et al.
ADVANCED MATERIALS (2017)
A Generalizable Strategy for the 3D Bioprinting of Hydrogels from Nonviscous Photo-crosslinkable Inks
Liliang Ouyang et al.
ADVANCED MATERIALS (2017)
Progress in 3D Printing of Carbon Materials for Energy-Related Applications
Kun Fu et al.
ADVANCED MATERIALS (2017)
Robocasting of silicon nitride with controllable shape and architecture for biomedical applications
Santuan Zhao et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2017)
Direct ink writing of ceramic matrix composite structures
Giorgia Franchin et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)
Direct ink writing of wollastonite-diopside glass-ceramic scaffolds from a silicone resin and engineered fillers
Hamada Elsayed et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)
Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
Biranchi Panda et al.
MATERIALS LETTERS (2017)
Strengthening and Stiffening Graphene Oxide Fiber with Trivalent Metal Ion Binders
Wonsik Eom et al.
PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION (2017)
Architected cellular ceramics with tailored stiffness via direct foam writing
Joseph T. Muth et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2017)
Acoustic control of microstructures during direct ink writing of two-phase materials
Leanne Friedrich et al.
SENSORS AND ACTUATORS A-PHYSICAL (2017)
3D printed reversible shape changing soft actuators assisted by liquid crystal elastomers
Chao Yuan et al.
SOFT MATTER (2017)
3D printing: Printing precision and application in food sector
Zhenbin Liu et al.
TRENDS IN FOOD SCIENCE & TECHNOLOGY (2017)
Hydraulic hydrogel actuators and robots optically and sonically camouflaged in water
Hyunwoo Yuk et al.
NATURE COMMUNICATIONS (2017)
3D Printable Ceramic-Polymer Electrolytes for Flexible High-Performance Li-Ion Batteries with Enhanced Thermal Stability
Aaron J. Blake et al.
ADVANCED ENERGY MATERIALS (2017)
Environmentally Friendly Engineering and Three-Dimensional Printing of TiO2 Hierarchical Mesoporous Cellular Architectures
Maria A. Torres Arango et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)
Solvent-cast based metal 3D printing and secondary metallic infiltration
Chao Xu et al.
JOURNAL OF MATERIALS CHEMISTRY C (2017)
A multifunctional skin-like sensor based on a 3D printed thermo-responsive hydrogel
Zhouyue Lei et al.
MATERIALS HORIZONS (2017)
A review of 4D printing
Farhang Momeni et al.
MATERIALS & DESIGN (2017)
Flexible mechanical metamaterials
Katia Bertoldi et al.
NATURE REVIEWS MATERIALS (2017)
Sequential self-folding of polymer sheets
Ying Liu et al.
SCIENCE ADVANCES (2017)
3D printing of bacteria into functional complex materials
Manuel Schaffner et al.
SCIENCE ADVANCES (2017)
Additive Manufacturing of Cellulosic Materials with Robust Mechanics and Antimicrobial Functionality
Sebastian W. Pattinson et al.
ADVANCED MATERIALS TECHNOLOGIES (2017)
3D-Printing of Meso-structurally Ordered Carbon Fiber/Polymer Composites with Unprecedented Orthotropic Physical Properties
James P. Lewicki et al.
SCIENTIFIC REPORTS (2017)
Direct Ink Write (DIW) 3D Printed Cellulose Nanocrystal Aerogel Structures
Vincent Chi-Fung Li et al.
SCIENTIFIC REPORTS (2017)
Linking Rheology and Printability for Dense and Strong Ceramics by Direct Ink Writing
Amin M'Barki et al.
SCIENTIFIC REPORTS (2017)
3D Printed Silicones with Shape Memory
Amanda S. Wu et al.
SCIENTIFIC REPORTS (2017)
3D Printing Bioinspired Ceramic Composites
Ezra Feilden et al.
SCIENTIFIC REPORTS (2017)
A review of Additive Manufacturing technology and Cost Estimation techniques for the defence sector
Alessandro Busachi et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2017)
Graphene Oxide: An All-in-One Processing Additive for 3D Printing
Esther Garcia-Tunon et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Lightweight 3D cellular composites inspired by balsa
Sardar Malek et al.
BIOINSPIRATION & BIOMIMETICS (2017)
Effects of interlocking on interlayer adhesion and strength of structures in 3D printing of concrete
Babak Zareiyan et al.
AUTOMATION IN CONSTRUCTION (2017)
Four-dimensional Printing of Liquid Crystal Elastomers
Cedric P. Ambulo et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Multimaterial 3D Printing of Graphene-Based Electrodes for Electrochemical Energy Storage Using Thermoresponsive Inks
Victoria G. Rocha et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Fully Packaged Carbon Nanotube Supercapacitors by Direct Ink Writing on Flexible Substrates
Bolin Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
3D Printed Stretchable Tactile Sensors
Shuang-Zhuang Guo et al.
ADVANCED MATERIALS (2017)
3D-Printed Transparent Glass
Du T. Nguyen et al.
ADVANCED MATERIALS (2017)
All-Printed Flexible and Stretchable Electronics
Mohammed G. Mohammed et al.
ADVANCED MATERIALS (2017)
Modified 3D printed powder to cement-based material and mechanical properties of cement scaffold used in 3D printing
Pshtiwan Shakor et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Gigahertz Electromagnetic Structures via Direct Ink Writing for Radio-Frequency Oscillator and Transmitter Applications
Nanjia Zhou et al.
ADVANCED MATERIALS (2017)
Cellulose Nanocrystal Inks for 3D Printing of Textured Cellular Architectures
Gilberto Siqueira et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
Water-Responsive Shape Recovery Induced Buckling in Biodegradable Photo-Cross-Linked Poly(ethylene glycol) (PEG) Hydrogel
Abhijit Vijay Salvekar et al.
ACCOUNTS OF CHEMICAL RESEARCH (2017)
Silk based bioinks for soft tissue reconstruction using 3-dimensional (3D) printing with in vitro and in vivo assessments
Maria J. Rodriguez et al.
BIOMATERIALS (2017)
Three-dimensional printed PCL-hydroxyapatite scaffolds filled with CNTs for bone cell growth stimulation
Elsa M. Goncalves et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2016)
Laser-Direct Writing of Silver Metal Electrodes on Transparent Flexible Substrates with High-Bonding Strength
Weiping Zhou et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
3D Printing of Emulsions and Foams into Hierarchical Porous Ceramics
Clara Minas et al.
ADVANCED MATERIALS (2016)
Ultraflexible In-Plane Micro-Supercapacitors by Direct Printing of Solution-Processable Electrochemically Exfoliated Graphene
Zhaoyang Liu et al.
ADVANCED MATERIALS (2016)
Synthesis and biomedical applications of aerogels: Possibilities and challenges
Hajar Maleki et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2016)
Current advances and future perspectives in extrusion-based bioprinting
Ibrahim T. Ozbolat et al.
BIOMATERIALS (2016)
The temperature-dependent fracture models for fiber-reinforced ceramic matrix composites
Yong Deng et al.
COMPOSITE STRUCTURES (2016)
Additive Manufacturing of Dense Ceramic Parts via Direct Ink Writing of Aqueous Alumina Suspensions
Lisa Rueschhoff et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2016)
In situ observation of mechanical damage within a SiC-SiC ceramic matrix composite
L. Saucedo-Mora et al.
JOURNAL OF NUCLEAR MATERIALS (2016)
Additive Manufacturing of SiCN Ceramic Matrix for SiC Fiber Composites by Flash Pyrolysis of Nanoscale Polymer Films
Setareh Azarnoush et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2016)
Direct Ink Writing of a Preceramic Polymer and Fillers to Produce Hardystonite (Ca2ZnSi2O7) Bioceramic Scaffolds
Andrea Zocca et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2016)
Additive manufacturing of boron carbide via continuous filament direct ink writing of aqueous ceramic suspensions
William J. Costakis et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)
Direct Ink Writing of micrometric SiOC ceramic structures using a preceramic polymer
Giovanni Pierin et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)
Robocasting of structural ceramic parts with hydrogel inks
Ezra Feilden et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)
Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds
F. S. Senatov et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Supercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores
Cheng Zhu et al.
NANO LETTERS (2016)
An integrated design and fabrication strategy for entirely soft, autonomous robots
Michael Wehner et al.
NATURE (2016)
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Hyun-Wook Kang et al.
NATURE BIOTECHNOLOGY (2016)
Advanced structural ceramics in aerospace propulsion
Nitin P. Padture
NATURE MATERIALS (2016)
Laser-assisted direct ink writing of planar and 3D metal architectures
Mark A. Skylar-Scott et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)
Three-dimensional bioprinting of thick vascularized tissues
David B. Kolesky et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)
Three dimensional printed macroporous polylactic acid/hydroxyapatite composite scaffolds for promoting bone formation in a critical-size rat calvarial defect model
Haifeng Zhang et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2016)
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Liliang Ouyang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding
Thomas J. Hinton et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Liliang Ouyang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding
Thomas J. Hinton et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Freeze-Printing of Liquid Metal Alloys for Manufacturing of 3D, Conductive, and Flexible Networks
Abhishek Gannarapu et al.
ADVANCED MATERIALS TECHNOLOGIES (2016)
Multifunctional 3D printing of heterogeneous hydrogel structures
Ali Nadernezhad et al.
SCIENTIFIC REPORTS (2016)
Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing
Freek Bos et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Deposition of ordered two-phase materials using microfluidic print nozzles with acoustic focusing
Rachel R. Collino et al.
EXTREME MECHANICS LETTERS (2016)
Three-Dimensional Printing of High-Content Graphene Scaffolds for Electronic and Biomedical Applications
Adam E. Jakus et al.
ACS NANO (2015)
Metallic Architectures from 3D-Printed Powder-Based Liquid Inks
Adam E. Jakus et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
Topology Optimized Architectures with Programmable Poisson's Ratio over Large Deformations
Anders Clausen et al.
ADVANCED MATERIALS (2015)
Direct 3D Printing of Shear-Thinning Hydrogels into Self-Healing Hydrogels
Christopher B. Highley et al.
ADVANCED MATERIALS (2015)
Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks
James O. Hardin et al.
ADVANCED MATERIALS (2015)
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Sungmin Hong et al.
ADVANCED MATERIALS (2015)
Biomimetic 3D tissue printing for soft tissue regeneration
Falguni Pati et al.
BIOMATERIALS (2015)
Porous alumina ceramic scaffolds with biomimetic macro/micro-porous structure using three-dimensional (3-D) ceramic/camphene-based extrusion
Young-Wook Moon et al.
CERAMICS INTERNATIONAL (2015)
Conductive 3D microstructures by direct 3D printing of polymer/carbon nanotube nanocomposites via liquid deposition modeling
Giovanni Postiglione et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
4D Printing with Mechanically Robust, Thermally Actuating Hydrogels
Shannon E. Bakarich et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2015)
Direct write printing of three-dimensional ZrO2 biological scaffolds
Ya-yun Li et al.
MATERIALS & DESIGN (2015)
First demonstration of promising selective electron beam melting method for utilizing high-entropy alloys as engineering materials
Tadashi Fujieda et al.
MATERIALS LETTERS (2015)
3D printing of a multifunctional nanocomposite helical liquid sensor
Shuang-zhuang Guo et al.
NANOSCALE (2015)
On the origin of the stability of graphene oxide membranes in water
Che-Ning Yeh et al.
Nature Chemistry (2015)
Active mixing of complex fluids at the microscale
Thomas J. Ober et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2015)
Additive manufacturing for the food industry
Jeffrey I. Lipton et al.
TRENDS IN FOOD SCIENCE & TECHNOLOGY (2015)
Structural optimization of 3D-printed synthetic spider webs for high strength
Zhao Qin et al.
NATURE COMMUNICATIONS (2015)
Highly compressible 3D periodic graphene aerogel microlattices
Cheng Zhu et al.
NATURE COMMUNICATIONS (2015)
Multimaterial magnetically assisted 3D printing of composite materials
Dimitri Kokkinis et al.
NATURE COMMUNICATIONS (2015)
Self-healable, super tough graphene oxide-poly(acrylic acid) nanocomposite hydrogels facilitated by dual cross-linking effects through dynamic ionic interactions
Ming Zhong et al.
JOURNAL OF MATERIALS CHEMISTRY B (2015)
Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels
Thomas J. Hinton et al.
SCIENCE ADVANCES (2015)
Engineering an in vitro air-blood barrier by 3D bioprinting
Lenke Horvath et al.
SCIENTIFIC REPORTS (2015)
A Review on 3D Printing for Customized Food Fabrication
Jie Sun et al.
43RD NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 43 (2015)
Toward Macroscale, Isotropic Carbons with Graphene-Sheet-Like Electrical and Mechanical Properties
Marcus A. Worsley et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Direct Writing of Gallium-Indium Alloy for Stretchable Electronics
J. William Boley et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Three-Dimensional Printing of Elastomeric, Cellular Architectures with Negative Stiffness
Eric B. Duoss et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
3D Printing: 3D-Printing of Lightweight Cellular Composites (Adv. Mater. 34/2014)
Brett G. Compton et al.
ADVANCED MATERIALS (2014)
3D-Printing of Lightweight Cellular Composites
Brett G. Compton et al.
ADVANCED MATERIALS (2014)
3D Bioprinting of Vascularized, Heterogeneous Cell-Laden Tissue Constructs
David B. Kolesky et al.
ADVANCED MATERIALS (2014)
The 3D printing of gelatin methacrylamide cell-laden tissue-engineered constructs with high cell viability
Thomas Billiet et al.
BIOMATERIALS (2014)
Numerical investigation of channel blockage by flowing microparticles
Gbedo Constant Agbangla et al.
COMPUTERS & FLUIDS (2014)
Structuring adsorbents and catalysts by processing of porous powders
Farid Akhtar et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)
Properties of Polylactide Inks for Solvent-Cast Printing of Three-Dimensional Freeform Microstructures
Shuang-Zhuang Guo et al.
LANGMUIR (2014)
3D graphene supported MoO2 for high performance binder-free lithium ion battery
Zhi Xiang Huang et al.
NANOSCALE (2014)
Manufacture of β-TCP/alginate scaffolds through a Fab@home model for application in bone tissue engineering
G. S. Diogo et al.
BIOFABRICATION (2014)
Effect of Polymer Infiltration on the Flexural Behavior of β-Tricalcium Phosphate Robocast Scaffolds
Francisco J. Martinez-Vazquez et al.
MATERIALS (2014)
Mineralized biomimetic collagen/alginate/silica composite scaffolds fabricated by a low-temperature bio-plotting process for hard tissue regeneration: fabrication, characterisation and in vitro cellular activities
HyeongJin Lee et al.
JOURNAL OF MATERIALS CHEMISTRY B (2014)
3D-printed magnetic Fe3O4/MBG/PCL composite scaffolds with multifunctionality of bone regeneration, local anticancer drug delivery and hyperthermia
Jianhua Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY B (2014)
Development and characterisation of a new bioink for additive tissue manufacturing
Ferry P. W. Melchels et al.
JOURNAL OF MATERIALS CHEMISTRY B (2014)
Graphene oxide dispersions: tuning rheology to enable fabrication
Sina Naficy et al.
MATERIALS HORIZONS (2014)
3D Bioprinting of Cellulose Structures from an Ionic Liquid
Kajsa Markstedt et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2014)
Mechanical properties of bioactive glass (13-93) scaffolds fabricated by robotic deposition for structural bone repair
Xin Liu et al.
ACTA BIOMATERIALIA (2013)
High-resolution PLA-based composite scaffolds via 3-D printing technology
T. Serra et al.
ACTA BIOMATERIALIA (2013)
High-Throughput Printing via Microvascular Multinozzle Arrays
Christopher J. Hansen et al.
ADVANCED MATERIALS (2013)
3D Printing of Free Standing Liquid Metal Microstructures
Collin Ladd et al.
ADVANCED MATERIALS (2013)
3D Printing of Interdigitated Li-Ion Microbattery Architectures
Ke Sun et al.
ADVANCED MATERIALS (2013)
Additive manufacturing and its societal impact: a literature review
Samuel H. Huang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Evaluation of Cell Viability and Functionality in Vessel-like Bioprintable Cell-Laden Tubular Channels
Yin Yu et al.
JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2013)
Liquid-Phase Gallium-Indium Alloy Electronics with Microcontact Printing
Arya Tabatabai et al.
LANGMUIR (2013)
Solvent-Cast Three-Dimensional Printing of Multifunctional Microsystems
Shuang-Zhuang Guo et al.
SMALL (2013)
Developments in construction-scale additive manufacturing processes
S. Lim et al.
AUTOMATION IN CONSTRUCTION (2012)
Hardened properties of high-performance printing concrete
T. T. Le et al.
CEMENT AND CONCRETE RESEARCH (2012)
Geometrically Complex Silicon Carbide Structures Fabricated by Robocasting
Kunpeng Cai et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2012)
Direct-write assembly of silicate and borate bioactive glass scaffolds for bone repair
Aylin M. Deliormanli et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)
Direct-write fabrication of freestanding nanocomposite strain sensors
Rouhollah Dermanaki Farahani et al.
NANOTECHNOLOGY (2012)
Direct ink writing of highly porous and strong glass scaffolds for load-bearing bone defects repair and regeneration
Qiang Fu et al.
ACTA BIOMATERIALIA (2011)
Bioinspired Strong and Highly Porous Glass Scaffolds
Qiang Fu et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Photocurable Liquid Core-Fugitive Shell Printing of Optical Waveguides
David J. Lorang et al.
ADVANCED MATERIALS (2011)
Conformal Printing of Electrically Small Antennas on Three-Dimensional Surfaces
Jacob J. Adams et al.
ADVANCED MATERIALS (2011)
Omnidirectional Printing of 3D Microvascular Networks
Willie Wu et al.
ADVANCED MATERIALS (2011)
Thixotropic rheology of concentrated alumina colloidal gels for solid freeform fabrication
Cheng Zhu et al.
JOURNAL OF RHEOLOGY (2011)
Cluster formation and growth in microchannel flow of dilute particle suspensions
Tarun Gudipaty et al.
MICROFLUIDICS AND NANOFLUIDICS (2011)
Characterization and modeling of direct-write fabrication of microscale polymer fibers
Scott M. Berry et al.
POLYMER (2011)
Printed Origami Structures
Bok Yeop Ahn et al.
ADVANCED MATERIALS (2010)
Ultraviolet-Assisted Direct-Write Fabrication of Carbon Nanotube/Polymer Nanocomposite Microcoils
Louis Laberge Lebel et al.
ADVANCED MATERIALS (2010)
Polymer-Derived Ceramics: 40 Years of Research and Innovation in Advanced Ceramics
Paolo Colombo et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2010)
Material characterisation and process development for chocolate additive layer manufacturing
L. Hao et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2010)
Load partitioning in Al2O3-Al composites with three-dimensional periodic architecture
M. L. Young et al.
ACTA MATERIALIA (2009)
Direct-Write Assembly of 3D Hydrogel Scaffolds for Guided Cell Growth
Robert A. Barry et al.
ADVANCED MATERIALS (2009)
Scaffold-free vascular tissue engineering using bioprinting
Cyrille Norotte et al.
BIOMATERIALS (2009)
Effect of temperature and cross-linking density on rheology of chemical cross-linked guar gum at the gel point
Chiara Sandolo et al.
FOOD HYDROCOLLOIDS (2009)
Modeling and control of fluid dispensing processes: a state-of-the-art review
X. B. Chen
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Effect of materials and modelling on the design of the space-based lightweight mirror
Shaowen Guo et al.
MATERIALS & DESIGN (2009)
Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes
Bok Y. Ahn et al.
SCIENCE (2009)
Graphene oxide papers modified by divalent ions -: Enhancing mechanical properties via chemical cross-linking
Sungjin Park et al.
ACS NANO (2008)
Direct-write assembly of microperiodic silk fibroin scaffolds for tissue engineering applications
Sourabh Ghosh et al.
ADVANCED FUNCTIONAL MATERIALS (2008)
Mechanical properties of calcium phosphate scaffolds fabricated by robocasting
Pedro Miranda et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2008)
In vivo bone response to 3D periodic hydroxyapatite scaffolds assembled by direct ink writing
Joshua L. Simon et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2007)
Direct ink writing of three-dimensional ceramic structures
Jennifer A. Lewis et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)
Direct ink writing of 3D functional materials
Jennifer A. Lewis
ADVANCED FUNCTIONAL MATERIALS (2006)
Sintering and robocasting of β-tricalcium phosphate scaffolds for orthopaedic applications
P Miranda et al.
ACTA BIOMATERIALIA (2006)
Concentrated hydroxyapatite inks for direct-write assembly of 3-D periodic scaffolds
S Michna et al.
BIOMATERIALS (2005)
Direct writing in three dimensions
Jennifer A. Lewis et al.
MATERIALS TODAY (2004)
Colloidal inks for directed assembly of 3-D periodic structures
JE Smay et al.
LANGMUIR (2002)
Anisotropic elasticity of cortical and cancellous bone in the posterior mandible increases peri-implant stress and strain under oblique loading
AM O'Mahony et al.
CLINICAL ORAL IMPLANTS RESEARCH (2001)