4.8 Article

Crystal Growth Regulation of 2D/3D Perovskite Films for Solar Cells with Both High Efficiency and Stability

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

High-Polarizability Organic Ferroelectric Materials Doping for Enhancing the Built-In Electric Field of Perovskite Solar Cells Realizing Efficiency over 24%

Weijie Chen et al.

Summary: An effective method of enhancing the built-in electric field intensity in perovskite solar cells is reported in this study. By doping an organic ferroelectric material, PVDF:DH, an additional electric field is generated, promoting charge-carrier transport, perovskite growth, and improving the overall performance and stability of the solar cells.

ADVANCED MATERIALS (2022)

Review Chemistry, Multidisciplinary

Advancing 2D Perovskites for Efficient and Stable Solar Cells: Challenges and Opportunities

Xiaoming Zhao et al.

Summary: Perovskite solar cells have shown great potential for high efficiency and low cost production, but they face tradeoffs between efficiency and stability. 2D perovskites offer better stability compared to 3D perovskites, but with lower efficiency; while 2D/3D perovskites show higher efficiency but relatively poor stability.

ADVANCED MATERIALS (2022)

Article Multidisciplinary Sciences

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells

Minjin Kim et al.

Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.

SCIENCE (2022)

Article Multidisciplinary Sciences

Highly efficient and stable perovskite solar cells enabled by low-dimensional perovskitoids

Jinbo Chen et al.

Summary: By capping the photoactive layer with low-dimensional perovskitoids, the efficiency and stability of perovskite solar cells can be effectively improved. The low-dimensional perovskitoids can passivate surface defects and provide excellent protection, allowing the cells to maintain high efficiency under severe environmental conditions.

SCIENCE ADVANCES (2022)

Article Chemistry, Physical

Facet orientation tailoring via 2D-seed-induced growth enables highly efficient and stable perovskite solar cells

Chao Luo et al.

Summary: In this study, highly oriented 2D perovskite seeds were introduced to optimize the growth kinetics of 3D perovskite, resulting in a high-quality mixed-dimensional perovskite film with superior PCE and FF.
Review Chemistry, Multidisciplinary

The 2D Halide Perovskite Rulebook: How the Spacer Influences Everything from the Structure to Optoelectronic Device Efficiency

Xiaotong Li et al.

Summary: This review provides guidelines on choosing spacers and incorporating them into crystalline materials and optoelectronic devices for two-dimensional halide perovskites. The comprehensive understanding of the effects of spacers on structure, properties, and device performance can accelerate the discovery and application of novel 2D materials in high-performance devices.

CHEMICAL REVIEWS (2021)

Article Chemistry, Multidisciplinary

Grain Boundary Engineering with Self-Assembled Porphyrin Supramolecules for Highly Efficient Large-Area Perovskite Photovoltaics

Zihan Fang et al.

Summary: Grain boundary management is crucial for the performance of polycrystalline perovskite solar cells, and a designed supramolecular binder can simultaneously passivate defects and promote carrier transport, leading to improved efficiency and stability. The NiP-doped PSCs achieved a certified efficiency of 22.1% and retained over 80% initial performance after continuous illumination or heating for 3000 hours at 85 degrees C.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Article Multidisciplinary Sciences

Efficient perovskite solar cells via improved carrier management

Jason J. Yoo et al.

Summary: Metal halide perovskite solar cells have shown great potential to disrupt the silicon solar cell market with their improved performance, yet still face limitations in light-harvesting due to charge carrier recombination. Efforts to enhance charge carrier management offer a path to increase device performance and approach the theoretical efficiency limit of PSCs.

NATURE (2021)

Article Multidisciplinary Sciences

Tuning structural isomers of phenylenediammonium to afford efficient and stable perovskite solar cells and modules

Cheng Liu et al.

Summary: The study focuses on understanding the energy barrier of 2D perovskite formation and proposes a method to prevent the formation of in-plane favored 2D perovskite layers, leading to improved device performance.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Multidisciplinary

Spacer Engineering Using Aromatic Formamidinium in 2D/3D Hybrid Perovskites for Highly Efficient Solar Cells

Tingting Liu et al.

Summary: The study demonstrates that aromatic spacers play a crucial role in 2D/3D hybrid perovskites, improving crystalline growth and orientation, reducing defect states, and enhancing spatially resolved carrier lifetime.

ACS NANO (2021)

Article Multidisciplinary Sciences

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells

Jaeki Jeong et al.

Summary: The research introduces a new concept of using formate anion to suppress defects in metal halide perovskite films and enhance film crystallinity, leading to improved efficiency and stability of solar cells.

NATURE (2021)

Article Optics

Stable and low-photovoltage-loss perovskite solar cells by multifunctional passivation

Guang Yang et al.

Summary: An effective approach to reduce photovoltage loss in metal halide perovskite solar cells is through the passivation of internal bulk defects and dimensionally graded two-dimensional perovskite interface defects. This method resulted in significantly low photovoltage loss and improved operational stability across different bandgap systems.

NATURE PHOTONICS (2021)

Article Multidisciplinary Sciences

Lead halide-templated crystallization of methylamine-free perovskite for efficient photovoltaic modules

Tongle Bu et al.

Summary: Efficient and stable perovskite layers are crucial for the commercialization of perovskite solar cells. A lead halide-templated crystallization strategy has been developed to print formamidinium-cesium lead triiodide perovskite films, achieving high-quality large-area films with controlled nucleation and growth. An unencapsulated device with 23% efficiency and excellent long-term thermal stability has been achieved, showcasing the potential for practical application in the future.

SCIENCE (2021)

Article Multidisciplinary Sciences

Liquid medium annealing for fabricating durable perovskite solar cells with improved reproducibility

Nengxu Li et al.

Summary: The liquid medium annealing (LMA) technology shows promise in producing high-quality perovskite films and photovoltaic devices with improved crystal growth modulation and film uniformity. This method opens up an effective avenue for scalable and reproducible quality improvement in perovskite films and devices.

SCIENCE (2021)

Article Chemistry, Multidisciplinary

Thiophene-Based Two-Dimensional Dion-Jacobson Perovskite Solar Cells with over 15% Efficiency

Di Lu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Article Multidisciplinary Sciences

Two-dimensional halide perovskite lateral epitaxial heterostructures

Enzheng Shi et al.

NATURE (2020)

Review Chemistry, Multidisciplinary

High-Efficiency Perovskite Solar Cells

Jin Young Kim et al.

CHEMICAL REVIEWS (2020)

Review Chemistry, Multidisciplinary

Halide Perovskite Photovoltaics: Background, Status, and Future Prospects

Ajay Kumar Jena et al.

CHEMICAL REVIEWS (2019)

Article Chemistry, Multidisciplinary

Tailoring Passivation Molecular Structures for Extremely Small Open-Circuit Voltage Loss in Perovskite Solar Cells

Shuang Yang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Article Nanoscience & Nanotechnology

Photovoltaic solar cell technologies: analysing the state of the art

Pabitra K. Nayak et al.

NATURE REVIEWS MATERIALS (2019)

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

Article Chemistry, Multidisciplinary

Highly Efficient and Stable Solar Cells Based on Crystalline Oriented 2D/3D Hybrid Perovskite

Tong Zhou et al.

ADVANCED MATERIALS (2019)

Article Chemistry, Multidisciplinary

Photochemically Cross-Linked Quantum Well Ligands for 2D/3D Perovskite Photovoltaics with Improved Photovoltage and Stability

Andrew H. Proppe et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Review Chemistry, Multidisciplinary

Quantum and Dielectric Confinement Effects in Lower-Dimensional Hybrid Perovskite Semiconductors

Claudine Katan et al.

CHEMICAL REVIEWS (2019)

Review Chemistry, Multidisciplinary

Understanding Degradation Mechanisms and Improving Stability of Perovskite Photovoltaics

Caleb C. Boyd et al.

CHEMICAL REVIEWS (2019)

Article Multidisciplinary Sciences

2D perovskite stabilized phase-pure formamidinium perovskite solar cells

Jin-Wook Lee et al.

NATURE COMMUNICATIONS (2018)

Article Chemistry, Multidisciplinary

Phase Pure 2D Perovskite for High-Performance 2D-3D Heterostructured Perovskite Solar Cells

Pengwei Li et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Multidisciplinary

Stable high efficiency two-dimensional perovskite solar cells via cesium doping

Xu Zhang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Review Multidisciplinary Sciences

Promises and challenges of perovskite solar cells

Juan-Pablo Correa-Baena et al.

SCIENCE (2017)

Article Chemistry, Physical

Suppressed Ion Migration in Low-Dimensional Perovskites

Yun Lin et al.

ACS ENERGY LETTERS (2017)

Review Nanoscience & Nanotechnology

Understanding the physical properties of hybrid perovskites for photovoltaic applications

Jinsong Huang et al.

NATURE REVIEWS MATERIALS (2017)

Article Chemistry, Multidisciplinary

Unreacted PbI2 as a Double-Edged Sword for Enhancing the Performance of Perovskite Solar Cells

T. Jesper Jacobsson et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Article Chemistry, Multidisciplinary

2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications

Duyen H. Cao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Review Chemistry, Multidisciplinary

Device physics of polymer:fullerene bulk heterojunction solar cells

Paul W. M. Blom et al.

ADVANCED MATERIALS (2007)