相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Photopatternable materials for guided cell adhesion and growth
Dimitra Kourti et al.
EUROPEAN POLYMER JOURNAL (2022)
Laser-based hybrid micromachining processes: A review
Ashish Kumar Sahu et al.
OPTICS AND LASER TECHNOLOGY (2022)
Precision machining of biopolymers: A brief review of the literature and case study on diamond turning
Vinod Mishra et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2021)
A Review on Micro/Nanoforming to Fabricate 3D Metallic Structures
Jie Xu et al.
ADVANCED MATERIALS (2021)
Recent developments in hot embossing - a review
Swarup S. Deshmukh et al.
MATERIALS AND MANUFACTURING PROCESSES (2021)
Optimization in Milling of Polymer Materials for High Quality Surfaces
Ryota Uchiyama et al.
INTERNATIONAL JOURNAL OF AUTOMATION TECHNOLOGY (2021)
Thermally Reconfigurable Hologram Fabricated by Spatially Modulated Femtosecond Pulses on a Heat-Shrinkable Shape Memory Polymer for Holographic Multiplexing
Zhipeng Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
High-performance green electronic substrate employing flexible and transparent cellulose films
Yanling Sun et al.
CARBOHYDRATE POLYMERS (2021)
A review on micro-milling: recent advances and future trends
Barnabas Zoltan Balazs et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Precision replication of microlens arrays using variotherm-assisted microinjection moulding
Haoyang Zhang et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2021)
Laser welding of thermoplastics: An overview on lasers, materials, processes and quality
Luis F. F. F. Goncalves et al.
INFRARED PHYSICS & TECHNOLOGY (2021)
High-frequency and intrinsically stretchable polymer diodes
Naoji Matsuhisa et al.
NATURE (2021)
Laser Transmission Welding of Semi-Crystalline Polymers and Their Composites: A Critical Review
Foram Dave et al.
POLYMERS (2021)
Boron Nitride-Filled Linear Low-Density Polyethylene for Enhanced Thermal Transport: Continuous Extrusion of Micro-Textured Films
Ozgun Guzdemir et al.
POLYMERS (2021)
State-of-art review of laser irradiation strategies applied to laser transmission welding of polymers
Bappa Acherjee
OPTICS AND LASER TECHNOLOGY (2021)
Effect of Micro-Mold Cavity Dimension on Structure and Property of Polylactic Acid/Polycaprolactone Blend under Microinjection Molding Conditions
Meng Wang et al.
POLYMERS (2021)
Laser transmission welding of polymers - A review on welding parameters, quality attributes, process monitoring, and applications
Bappa Acherjee
JOURNAL OF MANUFACTURING PROCESSES (2021)
Lithographic Processes for the Scalable Fabrication of Micro- and Nanostructures for Biochips and Biosensors
Silvia Fruncillo et al.
ACS SENSORS (2021)
Formation and Distribution of the Mesophase in Ultrasonic Micro-Injection-Molded Isotactic Polypropylene
Xintong Zhao et al.
MACROMOLECULES (2021)
A review of focused ion beam applications in optical fibers
Karen Sloyan et al.
NANOTECHNOLOGY (2021)
High-Order Vector Bessel-Gauss Beams for Laser Micromachining of Transparent Materials
Justas Baltrukonis et al.
PHYSICAL REVIEW APPLIED (2021)
Recent advances in focused ion beam nanofabrication for nanostructures and devices: fundamentals and applications
Ping Li et al.
NANOSCALE (2021)
Experimental and numerical studies for the gas-assisted extrusion forming of polypropylene micro-tube
Zhong Ren et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2020)
Effect of process parameters on micro-textured surface generation in feed direction vibration assisted milling
X. H. Shen et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Nanoimprint lithography: Emergent materials and methods of actuation
Lewis M. Cox et al.
NANO TODAY (2020)
Thermoplastic biomass transparent films directly fabricated by chitosan nanospheres
Shuang Sun et al.
POLYMER (2020)
High Throughput Manufacturing of Bio-Resorbable Micro-Porous Scaffolds Made of Poly(L-lactide-co-ε-caprolactone) by Micro-Extrusion for Soft Tissue Engineering Applications
Xabier Mendibil et al.
POLYMERS (2020)
Soft-Lithography of Polyacrylamide Hydrogels Using Microstructured Templates: Towards Controlled Cell Populations on Biointerfaces
Andres Diaz Lantada et al.
MATERIALS (2020)
Research on Inner Gas Inflation Improvements in Double-layer Gas-assisted Extrusion of Micro-tubes
Cheng Luo et al.
POLYMERS (2020)
Structure-Property Relationship of Polyetherimide Fibers Filled with Carbon Nanoparticles
Elena M. Ivan'kova et al.
ACS OMEGA (2020)
Three-Dimensional Photonic Crystal Bulks with Outstanding Mechanical Performance Assembled by Thermoforming-Etching Cross-linked Polymer Microspheres
Yue Fu et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Birefringence- and Optical Distortion-Free Isotropic Polymer Lens Assisted by Photonic Microspheres
Dan Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Advances in precision micro/nano-electroforming: a state-of-the-art review
Honggang Zhang et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2020)
Fabrication of Micro-Structured LED Diffusion Plate Using Efficient Micro Injection Molding and Micro-Ground Mold Core
Yanjun Lu et al.
POLYMERS (2020)
Experimental study on viscosity properties of cyclic olefin copolymer (COC) flowing through micro capillary dies
Jin Lu et al.
POLYMER TESTING (2020)
Thermal Effect on Poly(methyl methacrylate) (PMMA) Material Removal in the Micromilling Process
Ying Yan et al.
POLYMERS (2020)
Hot Embossing of Micro-Pyramids into Thermoset Thiol-Ene Film
Dalius Jucius et al.
POLYMERS (2020)
Characterization of Stereolithography Printed Soft Tooling for Micro Injection Molding
Daniel Dempsey et al.
MICROMACHINES (2020)
Functional Analysis Validation of Micro and Conventional Injection Molding Machines Performances Based on Process Precision and Accuracy for Micro Manufacturing
Matteo Calaon et al.
MICROMACHINES (2020)
Replicability of process conditions of ultrasonic hot embossing for micropattern fabrication on thermoplastic substrates
Fan Fang-Yu et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Tunable Tensile Properties of Polypropylene and Polyethylene Terephthalate Fibrillar Blends through Micro-/Nanolayered Extrusion Technology
Mahmoud Embabi et al.
POLYMERS (2020)
High-throughput roll-to-roll production of polymer biochips for multiplexed DNA detection in point-of-care diagnostics
Pelin Toren et al.
LAB ON A CHIP (2020)
Out-of-plane surface patterning by subsurface processing of polymer substrates with focused ion beams
Serguei Chiriaev et al.
BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2020)
Direct thermoforming manufacture of cellulose transparent products employing nanospheres
Yanling Sun et al.
CARBOHYDRATE POLYMERS (2020)
Fabrication and application of flexible rectangular microtubes
Xing Huang et al.
POLYMER-PLASTICS TECHNOLOGY AND MATERIALS (2020)
Integrated outstanding precision and mechanical performance of transparent 3D photonic crystal devices employing cross-linked nanospheres via thermoforming in a rubbery state
Dan Chen et al.
JOURNAL OF MATERIALS CHEMISTRY C (2020)
Manipulating the triboelectric surface charge density of polymers by low-energy helium ion irradiation/implantation
Shuyao Li et al.
ENERGY & ENVIRONMENTAL SCIENCE (2020)
Ultrasonic welding of polymer micro fluidic devices by inserting metal parts
L. Hoehr et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2019)
Temperature and pressure evolution in fast heat cycle injection molding
Sara Liparoti et al.
MATERIALS AND MANUFACTURING PROCESSES (2019)
Fabrication of gradient porous microneedle array by modified hot embossing for transdermal drug delivery
Jiyu Li et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
A review on microfabrication of thermoplastic polymer-based microneedle arrays
Herwig Juster et al.
POLYMER ENGINEERING AND SCIENCE (2019)
Design and Manufacturing of a Disposable, Cyclo-Olefin Copolymer, Microfluidic Device for a Biosensor
Jorge Prada et al.
SENSORS (2019)
Modelling and experimental investigation on textured surface generation in vibration-assisted micro-milling
Wanqun Chen et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Ultrasonic Molding Technology: Recent Advances and Potential Applications in the Medical Industry
Ulisses Heredia-Rivera et al.
POLYMERS (2019)
Ion beam etching redeposition for 3D multimaterial nanostructure manufacturing
B. X. E. Desbiolles et al.
MICROSYSTEMS & NANOENGINEERING (2019)
A novel optical fiber temperature sensor with polymer-metal alternating structure
Yen-Lung Chou et al.
OPTICS AND LASER TECHNOLOGY (2019)
The coupling effect of micro-groove textures and nanofluids on cutting performance of uncoated cemented carbide tools in milling Ti-6Al-4V
Chichi Zhou et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Functional Changes during Electron-Beam Lithography of Biotinylated Poly(ethylene glycol) Thin Films
Xinpei Wu et al.
ACS MACRO LETTERS (2019)
Efficient and Precise Micro-Injection Molding of Micro-Structured Polymer Parts Using Micro-Machined Mold Core by WEDM
Qianghua Liao et al.
POLYMERS (2019)
Investigation of Mucoadhesion and Degradation of PCL and PLGA Microcontainers for Oral Drug Delivery
Zarmeena Abid et al.
POLYMERS (2019)
Effect of injection speed on the mechanical properties of isotactic polypropylene micro injection molded parts based on a nanoindentation test
Lixia Wang et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2019)
Polymeric composites for powder-based additive manufacturing: Materials and applications
Shangqin Yuan et al.
PROGRESS IN POLYMER SCIENCE (2019)
A wireless body area sensor network based on stretchable passive tags
Simiao Niu et al.
NATURE ELECTRONICS (2019)
Study on Vibration Transmission and Interfacial Fusion in Ultrasonic Bonding Process for Thermoplastic Micro Joint
Yibo Sun et al.
ADVANCES IN POLYMER TECHNOLOGY (2018)
Experimental investigation and modelling of drilling on multi-wall carbon nanotube-embedded epoxy/glass fabric polymeric nanocomposites
Kalyan Kumar Singh et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2018)
Micro-injection molding of thermoplastic polymers: Proposal of a constitutive law as function of the aspect ratios
Patrice Mele et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2018)
Protein Bricks: 2D and 3D Bio-Nanostructures with Shape and Function on Demand
Jianjuan Jiang et al.
ADVANCED MATERIALS (2018)
Advanced Materials through Assembly of Nanocelluloses
Eero Kontturi et al.
ADVANCED MATERIALS (2018)
Role of lignin nanoparticles in UV resistance, thermal and mechanical performance of PMMA nanocomposites prepared by a combined free-radical graft polymerization/masterbatch procedure
Weijun Yang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Machining of biocompatible materials: a review
Kushendarsyah Saptaji et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Laser transmission welding of poly(lactic acid) and polyamide66/sepiolite nanocomposites
Francisco J. Navas-Martos et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2018)
Proposal of laser assisted hot embossing technology for glass
Tsuneo Kurita et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Fabrication of high-density microneedle masters towards the commercialisation of dissolving microneedles
Muthita Chiaranairungroj et al.
MICRO & NANO LETTERS (2018)
Femtosecond Laser Processing of Biodegradable Polymers
Mitsuhiro Terakawa
APPLIED SCIENCES-BASEL (2018)
Localized Self- Growth of Reconfigurable Architectures Induced by a Femtosecond Laser on a Shape-Memory Polymer
Yachao Zhang et al.
ADVANCED MATERIALS (2018)
Extraction, chemical modification and characterization of chitin and chitosan
Hakima El Knidri et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)
Flexible micro manufacturing platform for the fabrication of PMMA microfluidic devices
G. Trotta et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Ultrasonic thermoforming of a large thermoplastic polyurethane film with the aid of infrared heating
Hyun-Joong Lee et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2017)
Investigation on replication of microfluidic channels by hot embossing
Ferah Cogun et al.
MATERIALS AND MANUFACTURING PROCESSES (2017)
Ultrasonic fabrication of micro fluidic channels from polyether ether ketone (PEEK)
J. Kosloh et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2017)
Ultrashort pulse laser micro-welding of cyclo-olefin copolymers
Gian-Luca Roth et al.
OPTICS AND LASERS IN ENGINEERING (2017)
Application of graphene-polymer composite heaters in gas-assisted micro hot embossing
Cih Cheng et al.
RSC ADVANCES (2017)
Three-dimensional chiral microstructures fabricated by structured optical vortices in isotropic material
Jincheng Ni et al.
LIGHT-SCIENCE & APPLICATIONS (2017)
The study of laser transmission joining PA66 and PVC with large compatibility difference
Huixia Liu et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Micro-nanostructured polymer surfaces using injection molding: A review
K. Maghsoudi et al.
MATERIALS TODAY COMMUNICATIONS (2017)
Additive direct-write microfabrication for MEMS: A review
Kwok Siong Teh
FRONTIERS OF MECHANICAL ENGINEERING (2017)
Micromilling of Poly(methyl methacrylate, PMMA) using Single-Crystal Diamond Tools
Emrullah Korkmaz et al.
45TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 45) (2017)
Preparation of Highly Thermally Conductive Polymer Composite at Low Filler Content via a Self-Assembly Process between Polystyrene Microspheres and Boron Nitride Nanosheets
Xiongwei Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Tunable diffraction grating in flexible substrate by UV-nanoimprint lithography
F. Hamouda et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2017)
Lithography-based methods to manufacture biomaterials at small scales
Khanh T. M. Tran et al.
JOURNAL OF SCIENCE-ADVANCED MATERIALS AND DEVICES (2017)
Recent advances in micro- and nano-machining technologies
Shang Gao et al.
FRONTIERS OF MECHANICAL ENGINEERING (2017)
Direct Write Protein Patterns for Multiplexed Cytokine Detection from Live Cells Using Electron Beam Lithography
Uland Y. Lau et al.
ACS NANO (2016)
Photolithographic Micropatterning of Conducting Polymers on Flexible Silk Matrices
Ramendra K. Pal et al.
ADVANCED MATERIALS (2016)
Laser-Directed Assembly of Aligned Carbon Nanotubes in Three Dimensions for Multifunctional Device Fabrication
Wei Xiong et al.
ADVANCED MATERIALS (2016)
Process chains for high-precision components with micro-scale features
E. Uhlmann et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
Three-dimensional patterning in polymer optical waveguides using focused ion beam milling
Kevin Kruse et al.
JOURNAL OF MICRO-NANOLITHOGRAPHY MEMS AND MOEMS (2016)
Experimental study of polymer microlens fabrication using partial-filling hot embossing technique
Sean Moore et al.
MICROELECTRONIC ENGINEERING (2016)
Ablation-cooled material removal with ultrafast bursts of pulses
Can Kerse et al.
NATURE (2016)
Hot-embossing replication of self-centering optical fiber alignment structures prototyped by deep proton writing
Evert Ebraert et al.
OPTICAL ENGINEERING (2016)
Continuous micro-/nano-fiber composites of polyamide 6/polyethylene oxide with tunable mechanical properties using a novel co-extrusion technique
Jia Wang et al.
POLYMER (2016)
Nanoscale probing of electron-regulated structural transitions in silk proteins by near-field IR imaging and nano-spectroscopy
Nan Qin et al.
NATURE COMMUNICATIONS (2016)
Fabrication of Film-Type Light Guide Plates by Using UV Nano-Imprint Lithography to Enhance Optical Properties
So Won Kim et al.
NANOSCIENCE AND NANOTECHNOLOGY LETTERS (2016)
Electron-beam lithography for polymer bioMEMS with submicron features
Kee Scholten et al.
MICROSYSTEMS & NANOENGINEERING (2016)
Optimization for solid polymer microstructure replication using gas-assisted hot embossing under low pressure
Lei Wan et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2016)
A Sensitive and Biodegradable Pressure Sensor Array for Cardiovascular Monitoring
Clementine M. Boutry et al.
ADVANCED MATERIALS (2015)
Applications of nanoimprint lithography/hot embossing: a review
Yifang Chen
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2015)
Influence of SHI upon nanohole free volume and micro scale level surface modifications of polyethyleneterephthalate polymer films
Rajesh Kumar et al.
APPLIED SURFACE SCIENCE (2015)
Light-weight poly(vinyl chloride)-based soundproofing composites with foam/film alternating multilayered structure
Teng Han et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Study on extrudate swell of polypropylene in double-lumen micro profile extrusion
Huiqing Tian et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Investigation of thermoplastic hot embossing process using soft polydimethylsiloxane (PDMS) micromold
Bong-Kee Lee et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2015)
Selective fluorescence functionalization of dye-doped polymerized structures fabricated by direct laser writing (DLW) lithography
Gustavo de Miguel et al.
NANOSCALE (2015)
Hybrid micro-machining processes: A review
Saeed Zare Chavoshi et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2015)
Trehalose glycopolymer resists allow direct writing of protein patterns by electron-beam lithography
Erhan Bat et al.
NATURE COMMUNICATIONS (2015)
Formation of Carbonized Polystyrene Sphere/hemisphere Shell Arrays by Ion Beam Irradiation and Subsequent Annealing or Chloroform Treatment
Xianyin Song et al.
SCIENTIFIC REPORTS (2015)
Functional Supramolecular Polymers for Biomedical Applications
Ruijiao Dong et al.
ADVANCED MATERIALS (2015)
Strategies for High Quality Injection Moulding of Polymer Nanopillars
Rasmus H. Pedersen et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2015)
Machining behaviour of three high-performance engineering plastics
Juan C. Campos Rubio et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2015)
Rail vehicle response to lateral carbody excitations imitating crosswind
Dirk Thomas et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT (2015)
Comparison between joining technologies for polymeric films
Maurizio Fiorini et al.
9TH CIRP CONFERENCE ON INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING - CIRP ICME '14 (2015)
Femto-Second Laser-Based Free Writing of 3D Protein Microstructures and Micropatterns with Sub-Micrometer Features: A Study on Voxels, Porosity, and Cytocompatibility
Barbara Pui Chan et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Rapid and mask-less laser-processing technique for the fabrication of microstructures in polydimethylsiloxane
C. L. Sones et al.
APPLIED SURFACE SCIENCE (2014)
Investigating the technological limits of micro-injection molding in replicating high aspect ratio micro-structured surfaces
G. Lucchetta et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2014)
A Novel of Biodegradable Implants Based on PLGA for Control Delivery of Cisplatin
Weifeng Li et al.
INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2014)
Design and experiments of extrusion die for polypropylene five-lumen micro tube
Guo-Bao Jin et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Micro hot embossing of thermoplastic polymers: a review
Linfa Peng et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2014)
Electron-Beam Patterning of Polymer Electrolyte Films To Make Multiple Nanoscale Gates for Nanowire Transistors
Damon J. Carrad et al.
NANO LETTERS (2014)
Harnessing catalysis to enhance scanning probe nanolithography
Stewart A. M. Carnally et al.
NANOSCALE (2014)
Review of Factors that Affect Shrinkage of Molded Part in Injection Molding
Daniele Annicchiarico et al.
MATERIALS AND MANUFACTURING PROCESSES (2014)
Ultra-fast laser microprocessing of medical polymers for cell engineering applications
R. Ortiz et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
All-water-based electron-beam lithography using silk as a resist
Sunghwan Kim et al.
NATURE NANOTECHNOLOGY (2014)
Chemical degradation and morphological instabilities during focused ion beam prototyping of polymers
A. Orthacker et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)
Roll-to-roll embossing of optical linear Fresnel lens polymer film for solar concentration
XinQuan Zhang et al.
OPTICS EXPRESS (2014)
Selective ultrasonic imprinting for micropattern replication on predefined area
Woosin Jung et al.
ULTRASONICS (2014)
Fabrication of Micro/Nano Structures on Metals by Femtosecond Laser Micromachining
K. M. Tanvir Ahmmed et al.
MICROMACHINES (2014)
Nanostructure Patterning on Flexible Substrates Using Electron Beam Lithography
K. S. Nagaraj et al.
INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS 2013 AND TWELFTH ASIAN CONFERENCE ON EXPERIMENTAL MECHANICS (2014)
Hot embossing of polymer optical waveguides for sensing applications
Maher Rezem et al.
2ND INTERNATIONAL CONFERENCE ON SYSTEM-INTEGRATED INTELLIGENCE: CHALLENGES FOR PRODUCT AND PRODUCTION ENGINEERING (2014)
Capillary Extrusion and Swell of a HDPE Melt Exhibiting Slip
Mahmoud Ansari et al.
ADVANCES IN POLYMER TECHNOLOGY (2013)
Micro/nanofabrication of poly(L-lactic acid) using focused ion beam direct etching
Tomoko Gowa Oyama et al.
APPLIED PHYSICS LETTERS (2013)
Injection molding of high aspect ratio sub-100 nm nanostructures
Maria Matschuk et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2013)
Microinjection molding of microsystem components: new aspects in improving performance
Can Yang et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2013)
Resolution Limits of Electron-Beam Lithography toward the Atomic Scale
Vitor R. Manfrinato et al.
NANO LETTERS (2013)
Effect of carbon fiber on the capillary extrusion behaviors of high-density polyethylene
Hideyuki Uematsu et al.
POLYMER JOURNAL (2013)
Polymer shrinkage of hot embossed microstructures for higher aspect ratio and smaller size
Xuelin Zhu et al.
SENSORS AND ACTUATORS A-PHYSICAL (2013)
A bioplastic with high strength constructed from a cellulose hydrogel by changing the aggregated structure
Qiyang Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2013)
Nanostructuring of free-standing, dielectric membranes using electron-beam lithography
Jon Olav Grepstad et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2013)
Electron-Beam Lithography for Patterning Biomolecules at the Micron and Nanometer Scale
Christopher M. Kolodziej et al.
CHEMISTRY OF MATERIALS (2012)
Photoresist-based polymer resonator antennas with permanent frame
A. Rashidian et al.
ELECTRONICS LETTERS (2012)
Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions
S. Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2012)
State of the Art on Micromilling of Materials, a Review
M.A. Câmara et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2012)
Microfabrication of fine electron beam tunnels using UV-LIGA and embedded polymer monofilaments for vacuum electron devices
Colin D. Joye et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2012)
Fabrication of micro-tube arrays in photopolymer SZ2080 by using three different methods of a direct laser polymerization technique
E. Stankevicius et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2012)
Three-dimensional nanofabrication of polystyrene by focused ion beam
C. C. Lee et al.
JOURNAL OF MICROSCOPY (2012)
Combination of Integrin-Binding Peptide and Growth Factor Promotes Cell Adhesion on Electron-Beam-Fabricated Patterns
Christopher M. Kolodziej et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)
Using UV roll-to-plate imprint lithography to fabricate light guide plates with microdot patterns
Jen-Chin Yang et al.
MICRO & NANO LETTERS (2012)
Roll-to-roll pilot nanoimprinting process for backlight devices
Tapio Makela et al.
MICROELECTRONIC ENGINEERING (2012)
Versatile route to gapless microlens arrays using laser-tunable wet-etched curved surfaces
Bian Hao et al.
OPTICS EXPRESS (2012)
New Concepts for Laser Transmission Welding of Dissimilar Thermoplastics
Ch. Hopmann et al.
PROGRESS IN RUBBER PLASTICS AND RECYCLING TECHNOLOGY (2012)
Review: Developments in micro/nanoscale fabrication by focused ion beams
Chung-Soo Kim et al.
VACUUM (2012)
Direct and Reliable Patterning of Plasmonic Nanostructures with Sub-10-nm Gaps
Huigao Duan et al.
ACS NANO (2011)
Polymeric endoaortic paving: Mechanical, thermoforming, and degradation properties of polycaprolactone/polyurethane blends for cardiovascular applications
J. H. Ashton et al.
ACTA BIOMATERIALIA (2011)
Evaluation of Vacuum Venting for Micro-injection Molding
S. -H. Yoon et al.
INTERNATIONAL POLYMER PROCESSING (2011)
Hot embossing of high performance polymers
M. Worgull et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2011)
Micron-scale polymer-metal cantilever actuators fabricated by focused ion beam
C. C. Lee et al.
SENSORS AND ACTUATORS A-PHYSICAL (2011)
Minimization of focused ion beam damage in nanostructured polymer thin films
Suhan Kim et al.
ULTRAMICROSCOPY (2011)
Viscous dissipation influencing viscosity of polymer melt in micro channels
Bin Xu et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2010)
Size characteristics of polymeric microstructures accompanying the UV hardening of a nanocomposite
N. D. Vorzobova et al.
JOURNAL OF OPTICAL TECHNOLOGY (2010)
Fabrication of cone-like microstructure using UV LIGA-like for light guide plate application
C. K. Chung et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2010)
Microthermoforming of nanostructured polymer films: a new bonding method for the integration of nanostructures in 3-dimensional cavities
Markus Heilig et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2010)
Highly sensitive flexible pressure sensors with microstructured rubber dielectric layers
Stefan C. B. Mannsfeld et al.
NATURE MATERIALS (2010)
Sub-10-nm half-pitch electron-beam lithography by using poly(methyl methacrylate) as a negative resist
Huigao Duan et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2010)
Fabrication of microlens arrays using a CO(2)-assisted embossing technique
Tzu-Chien Huang et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2009)
Limiting factors in sub-10 nm scanning-electron-beam lithography
Bryan Cord et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2009)
Understanding of hydrogen silsesquioxane electron resist for sub-5-nm-half-pitch lithography
Joel K. W. Yang et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2009)
Micro-injection moulding of polymer microfluidic devices
Usama M. Attia et al.
MICROFLUIDICS AND NANOFLUIDICS (2009)
An angled nano-tunnel fabricated on poly(methyl methacrylate) by a focused ion beam
Eun Kyu Her et al.
NANOTECHNOLOGY (2009)
Laser diode transmission welding of polypropylene: Geometrical and microstructure characterisation of weld
Elhem Ghorbel et al.
MATERIALS & DESIGN (2009)
Multi-category micro-milling tool wear monitoring with continuous hidden Markov models
Kunpeng Zhu et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2009)
Rheological behavior of POM polymer melt flowing through micro-channels
Chun-Sheng Chen et al.
EUROPEAN POLYMER JOURNAL (2008)
A novel microactuator for microbiopsy in capsular endoscopes
Sunkil Park et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2008)
Patterning surfaces with functional polymers
Zhihong Nie et al.
NATURE MATERIALS (2008)
Sculpting on polymers using focused ion beam
M. -W. Moon et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Machining and surface integrity of polymeric materials
C. Fetecau et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2008)
Focused ion beam micromachining and computation of polymeric photonic band gap
E. Pialat et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2007)
Parametric study of injection molding and hot embossing in polymer microfabrication
Cheng-Hsien Wu et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2007)
Microinjection molding of thermoplastic polymers:: a review
Julien Giboz et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2007)
Ion beam induced sintering of colloidal polystyrene nano-masks
D. Kraus et al.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2007)
New class of bioinspired lenses with a gradient refractive index
Y. Jin et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
Surface microstructure replication in injection molding
Uffe Arlo Theilade et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)
The design and manufacture of biomedical surfaces
J. J. Ramsden et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2007)
Directed immobilization of protein-coated nanospheres to nanometer-scale patterns fabricated by electron beam lithography of poly(ethylene glycol) self-assembled monolayers
Jonas Rundqvist et al.
LANGMUIR (2006)
Injection molding of polymer micro- and sub-micron structures with high-aspect ratios
AC Liou et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
Replications and analysis of microlens array fabricated by a modified LIGA process
DS Kim et al.
POLYMER ENGINEERING AND SCIENCE (2006)
Recent developments in nanofabrication using focused ion beams
AA Tseng
SMALL (2005)
Recent developments in nanofabrication using ion projection lithography
AA Tseng
SMALL (2005)
Review on micro molding of thermoplastic polymers
M Heckele et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2004)
Applications of LIGA technology to precision manufacturing of high-aspect-ratio micro-components and -systems: a review
CK Malek et al.
MICROELECTRONICS JOURNAL (2004)
Micro assembly injection moulding for the generation of hybrid microstructures
W Michaeli et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2003)
Materials for LiGA and LiGA-based microsysterns
J Hormes et al.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2003)
MEMS-micropumps: A review
NT Nguyen et al.
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2002)
Microfabrication: LIGA-X and applications
RK Kupka et al.
APPLIED SURFACE SCIENCE (2000)
分享论文
