4.8 Article

Air-Stabilized Lead-Free Hexagonal Cs3Bi2I9 Nanocrystals for Ultrahigh-Performance Optical Detection

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

Two-Dimensional Cs2AgBiBr6/WS2 Heterostructure-Based Photodetector with Boosted Detectivity via Interfacial Engineering

Feier Fang et al.

Summary: This study integrates two-dimensional perovskites with transition metal dichalcogenide monolayers to enhance photosensitivity and photoresponse. The vertically stacked heterostructure photodetector shows high detectivity and fast response time.

ACS NANO (2022)

Article Materials Science, Multidisciplinary

Ti3C2Tx MXene-RAN van der Waals Heterostructure-Based Flexible Transparent NIR Photodetector Array for 1024 Pixel Image Sensing Application

Chuqiao Hu et al.

Summary: The enriched surface functional group and unique 2D structure of Ti3C2Tx MXene contribute to enhanced photoresponsivity in near infrared photodetectors. The Ti3C2Tx-RAN PDs show higher on-off ratio compared to Au-RAN PDs under laser excitations. The Ti3C2Tx-RAN PDs also exhibit excellent mechanical stability and high transparency. A 1024-pixel image sensor array based on Ti3C2Tx-RAN PDs enables delicate and vivid imaging of a deer.

ADVANCED MATERIALS TECHNOLOGIES (2022)

Article Chemistry, Physical

All-inorganic lead-free NiOx/Cs3Bi2Br9 perovskite heterojunction photodetectors for ultraviolet multispectral imaging

Yujin Liu et al.

Summary: This study presents a self-powered NiOx/Cs3Bi2Br9 heterojunction photodetector with excellent photodetection performance achieved by electrochemically depositing NiOx as the hole transport layer. The optimized NiOx/Cs3Bi2Br9 heterojunction photodetector exhibits outstanding ultraviolet detection performance with fast response speed, wide dynamic range, high responsivity, and high detectivity, meeting the requirements for high-quality ultraviolet imaging. By integrating this optimized photodetector into a transmission mode ultraviolet multispectral imaging system, admirable imaging results were achieved under weak light conditions, showcasing the potential for bismuth-based ultraviolet photodetection and imaging development.

NANO RESEARCH (2022)

Article Chemistry, Applied

Effect of dimensional expansion on carrier transport behaviors of the hexagonal Bi-based perovskite crystals

Qihao Sun et al.

Summary: This study successfully synthesized CBIB by expanding the defect halide perovskite based on trivalent Bi3+, which showed improved charge transport performance and X-ray sensitivity after dimensional improvement, providing new strategies for the modification of lead-free perovskite optoelectronic devices.

JOURNAL OF ENERGY CHEMISTRY (2022)

Review Chemistry, Multidisciplinary

Metal Halide Perovskite Arrays: From Construction to Optoelectronic Applications

Xun Han et al.

Summary: Inorganic semiconductor arrays have transformed various areas of electronics and optoelectronics with their multifunctionality and large-scale integration. Metal halide perovskites are emerging as promising candidates for next-generation optoelectronic devices due to their excellent optoelectronic properties, processing ease, and compatibility with flexible substrates. Various patterning technologies have been employed to create perovskite arrays with nano/microstructured surfaces to enhance device performances, with applications including photodetectors, light-emitting diodes, lasers, and nanogratings.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Nanoscience & Nanotechnology

Interfacial Gradient-Energy-Band-Alignment Modulation via a Vapor-Phase Anion-Exchange Reaction toward Lead-Free Perovskite Photodetectors with Excellent UV Imaging Capability

Wanjun Li et al.

Summary: The study utilized a vapor-phase ion-substitution strategy to enhance the performance of Cs3Bi2Br9 photodetectors and demonstrated high-SNR UV imaging; the optimized Bi-based perovskite PDs showed excellent performance, with ON/OFF ratio and linear dynamic range improved by 20 and 2.6 times, respectively; vapor-phase anion exchange modified perovskite PDs exhibited long-term stability and high UV resistance.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Nanoscience & Nanotechnology

Designs of photoabsorption-enhanced variable Al component GaN nanostructure for UV photodetectors

Zhisheng Lv et al.

Summary: This paper investigates the effect of geometric structure of gradient Al component AlxGa1-xN nanowires on their optical response, using the finite element simulation software Comsol Multiphysics to study the optical properties of different geometric parameters. It was found that pillar nanostructured arrays with an axial inclination of 24 degrees can achieve omnidirectional and unified broadband light absorption for AlxGa1-xN cathodes. The study also establishes the photoemission efficiency of graded Al component AlxGa1-xN nanostructure using a Three-step Spicer emission model.

PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES (2021)

Article Multidisciplinary Sciences

Integrated polarization-sensitive amplification system for digital information transmission

Wenhao Ran et al.

Summary: The authors propose an integrated polarization-sensitive amplification system using a nanowire polarized photodetector and organic semiconductor transistors to boost the polarization sensitivity from 1.24 to 375. This integrated system can increase the anisotropic photocurrent ratio of any low-dimensional material corresponding to the polarized light, enabling the realization of a simple digital polarized light communication system with certain information disguising and confidentiality effects.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Multidisciplinary

Molecular Doping of 2D Indium Selenide for Ultrahigh Performance and Low-Power Consumption Broadband Photodetectors

Ye Wang et al.

Summary: This study demonstrates for the first time that molecular functionalization using a surfactant molecule can significantly enhance the performance of indium selenide in phototransistors, Schottky junctions, and van der Waals heterostructures, achieving ultrahigh photoresponsivity and field-effect mobility. This strategy is efficient, practical, and scalable, paving the way for the development of next-generation 2D opto-electronic devices.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Air-Stable Self-Powered Photodetectors Based on Lead-Free CsBi3I10/SnO2 Heterojunction for Weak Light Detection

Dandan Hao et al.

Summary: The self-powered photodetector based on CsBi3I10/SnO2 exhibits broad spectral response, fast response time, and good long-term stability. It demonstrates high photodetection capability, especially for weak light detection, making it a promising option for stable and broadband photodetectors in the future.

ADVANCED FUNCTIONAL MATERIALS (2021)

Review Chemistry, Multidisciplinary

Recent Advances in Perovskite Photodetectors for Image Sensing

Ludong Li et al.

Summary: This review provides a comprehensive overview of recent advances in metal halide perovskites for image sensing applications, including performance parameters, device types, applications of different dimensional materials, preparation methods, single-pixel imaging, and strategies for color discrimination.
Review Chemistry, Multidisciplinary

Lead-Free Perovskite Photodetectors: Progress, Challenges, and Opportunities

Yiqi Zhang et al.

Summary: Although lead-based photodetectors have unique and superior optoelectronic properties, their poor stability necessitates the substitution of lead with non-toxic elements to achieve comparable performance and long-term stability. Developing lead-free perovskite photodetectors shows promise for practical applications in various fields such as optical communication, image sensing, and narrowband photodetection.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

A self-powered UV photodetector based on the hydrovoltaic and photoelectric coupling properties of ZnO nanowire arrays

Hongye Guan et al.

Summary: This study introduces a novel self-powered UV photodetector as a sensor node in IoT, utilizing the hydrovoltaic and photoelectric effect of ZnO nanowire arrays to operate without external batteries. The photodetector can reflect the degree of smog and transmit information to mobile devices or the cloud, providing a new approach for environmental monitoring in IoT.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Review Materials Science, Multidisciplinary

Efficient Perovskite Nanocrystal-Based Optoelectronic Devices

Myeonggeun Han et al.

Summary: Halide perovskites are expected to be widely used in LEDs due to their excellent optoelectronic properties. Techniques like increasing exciton binding energy and using low-dimensional nanocrystals can enhance device performance and achieve color tuning through quantum confinement by controlling the size.

PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2021)

Article Materials Science, Multidisciplinary

High-Performance AlGaN-Based Solar-Blind UV Photodetectors for Sensing Applications

Yiping Chen et al.

Summary: The study focused on developing high-performance AlGaN-based solar-blind UV photodetectors and designing a discrete signal amplifier circuit for weak signal detection, ultimately leading to the successful development of a portable solar-blind UV detection system.

PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2021)

Article Materials Science, Multidisciplinary

Tunneling-assisted highly sensitive and stable lead-free Cs3Bi2I9 perovskite photodetectors for diffuse reflection imaging

Wanjun Li et al.

Summary: Lead-free perovskites, especially Cs3Bi2I9, are being researched as new active materials for photoconversion applications due to their low toxicity, stability, and high photosensitivity. The addition of an ultrathin Al2O3 layer at the interface of Cs3Bi2I9 perovskite PDs significantly improves their ON/OFF ratio, while the unsealed Cs3Bi2I9 perovskite PDs demonstrate excellent stability and imaging capabilities.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Article Chemistry, Multidisciplinary

Enhanced On-Off Ratio Photodetectors Based on Lead-Free Cs3Bi2I9 Single Crystal Thin Films

Wen-Guang Li et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

An Integrated Flexible All-Nanowire Infrared Sensing System with Record Photosensitivity

Wenhao Ran et al.

ADVANCED MATERIALS (2020)

Article Nanoscience & Nanotechnology

Self-Powered and Broadband Lead-Free Inorganic Perovskite Photodetector with High Stability

Di Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Multidisciplinary

Perovskite Granular Wire Photodetectors with Ultrahigh Photodetectivity

Yoon Ho Lee et al.

ADVANCED MATERIALS (2020)

Article Clinical Neurology

What Is Finite Element Analysis?

Adanna Welch-Phillips et al.

Clinical Spine Surgery (2020)

Article Chemistry, Physical

Anisotropic dielectric behavior of layered perovskite-like Cs3Bi2I9 crystals in the terahertz region

Qihao Sun et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2020)

Article Chemistry, Multidisciplinary

Broadband Defects Emission and Enhanced Ligand Raman Scattering in 0D Cs3Bi2I9 Colloidal Nanocrystals

Giuseppe M. Paterno et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Chemistry, Multidisciplinary

Silicon-Compatible Photodetectors: Trends to Monolithically Integrate Photosensors with Chip Technology

Wei Yang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Materials Science, Multidisciplinary

Inorganic CsBi3I10 perovskite/silicon heterojunctions for sensitive, self-driven and air-stable NIR photodetectors

Xiao-Wei Tong et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Article Chemistry, Multidisciplinary

Green fabrication of stable lead-free bismuth based perovskite solar cells using a non-toxic solvent

Sagar M. Jain et al.

COMMUNICATIONS CHEMISTRY (2019)

Article Nanoscience & Nanotechnology

Limitations of Cs3Bi2I9 as Lead-Free Photovoltaic Absorber Materials

Biplab Ghosh et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Engineering, Manufacturing

Integrated Evanescent Waveguide Detector for Optical Sensing

Rita Asquini et al.

IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2018)

Article Chemistry, Physical

Ambient-air-stable inorganic Cs2SnI6 double perovskite thin films via aerosol-assisted chemical vapour deposition

Jack Chun-Ren Ke et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Article Chemistry, Physical

Poor Photovoltaic Performance of Cs3Bi2I9: An Insight through First-Principles Calculations

Biplab Ghosh et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Review Chemistry, Multidisciplinary

Intriguing Optoelectronic Properties of Metal Halide Perovskites

Joseph S. Manser et al.

CHEMICAL REVIEWS (2016)

Article Chemistry, Multidisciplinary

Controlled Synthesis of Ultrathin Sb2Se3 Nanowires and Application for Flexible Photodetectors

Guihuan Chen et al.

ADVANCED SCIENCE (2015)