4.7 Article

Effects of Cr/Ni ratio on physical properties of Cr-Mn-Fe-Co-Ni high-entropy alloys

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Multidisciplinary

Plastic deformation of single crystals of the equiatomic Cr-Mn-Fe-Co-Ni high-entropy alloy in tension and compression from 10 K to 1273 K

Marino Kawamura et al.

Summary: The plastic deformation behavior of single crystals of the Cr-Mn-Fe-Co-Ni high-entropy alloy has been studied at different temperatures, showing sensitivity to strain rate, temperature, and crystal orientation. Solid-solution hardening is identified as the main strengthening mechanism, with deformation twinning occurring at low temperatures, impacting the material's tensile properties.

ACTA MATERIALIA (2021)

Article Materials Science, Multidisciplinary

Tracer diffusion in the σ phase of the CoCrFeMnNi system

Jingfeng Zhang et al.

Summary: The diffusion rates of Ni and Fe in the Cr-rich sigma-phase alloy are faster on the homologous temperature scale. Factors influencing element diffusion and phase stability are compared between the sigma phase and the equiatomic alloy.

ACTA MATERIALIA (2021)

Article Metallurgy & Metallurgical Engineering

High-Temperature Oxidation in Dry and Humid Atmospheres of the Equiatomic CrMnFeCoNi and CrCoNi High- and Medium-Entropy Alloys

Christiane Stephan-Scherb et al.

Summary: The surface degradation phenomena of two model equiatomic alloys from the CrMnFeCoNi alloy system were investigated in different environments. The oxidation resistance of CrMnFeCoNi is relatively poor due to the fast growth of porous Mn-oxide(s), while the chromia layer formed on CrCoNi in a dry atmosphere spalls off in a humid environment.

OXIDATION OF METALS (2021)

Article Nanoscience & Nanotechnology

Effects of annealing on hardness, yield strength and dislocation structure in single crystals of the equiatomic Cr-Mn-Fe-Co-Ni high entropy alloy

Dengshan Zhou et al.

Summary: Research shows that the macroscopic mechanical strength of single crystals of equiatomic Cr-Mn-Fe-Co-Ni high entropy alloy, which are expected to develop short-range ordering during thermal annealing, is not affected. The hardness, critical resolved shear stress, and activation volume values of the alloy do not significantly vary with the annealing temperature.

SCRIPTA MATERIALIA (2021)

Article Materials Science, Multidisciplinary

On the low-cycle fatigue response of CoCrNiFeMn high entropy alloy with ultra-fine grain structure

S. Picak et al.

Summary: In this study, the yield strength of High Entropy Alloy CoCrFeMnNi was improved through Equal Channel Angular Pressing (ECAP), resulting in very high yield strength levels and superior fatigue life at low strain amplitudes. The refined grain size, high density dislocation walls, and dislocation annihilation were identified as key factors governing the fatigue life and hardening behavior of the alloy.

ACTA MATERIALIA (2021)

Article Nanoscience & Nanotechnology

Superior low-cycle fatigue properties of CoCrNi compared to CoCrFeMnNi

Kaiju Lu et al.

Summary: The low-cycle fatigue behavior of single-phase, face-centered cubic CoCrNi and CoCrFeMnNi alloys at room temperature shows cyclic hardening followed by softening and a near steady state until failure. CoCrNi exhibits higher strength, lower inelastic-strain, and longer lifetime compared to CoCrFeMnNi. Microstructural investigations reveal no noticeable changes in texture, grain size, and twin fraction, but CoCrNi exhibits planar dislocation structures while CoCrFeMnNi shows well-defined wavy dislocation structures. This is attributed to CoCrNi's lower stacking fault energy, which enhances planar slip and delays deformation localization leading to superior fatigue resistance.

SCRIPTA MATERIALIA (2021)

Article Materials Science, Multidisciplinary

Can experiment determine the stacking fault energy of metastable alloys?

Xun Sun et al.

Summary: SFE is crucial for deformation mechanisms and mechanical properties of fcc metals and alloys. Negative SFE by DFT reflects thermodynamic instability of fcc phase, while experimentally determined SFEs are constrained by models. SFE obtained by DFT correlates well with primary deformation mechanisms in concentrated solid solutions.

MATERIALS & DESIGN (2021)

Article Physics, Multidisciplinary

Hidden Effects of Negative Stacking Fault Energies in Complex Concentrated Alloys

Zongrui Pei et al.

Summary: The study explores the negative stacking fault energies in high-entropy alloys and their impact on the polymorphism of Shockley partials. It is found that novel partial pairs are produced at low temperatures, resulting in significantly higher yield stresses, which has general implications for all negative-SFE alloys.

PHYSICAL REVIEW LETTERS (2021)

Article Multidisciplinary Sciences

Stacking fault energy in concentrated alloys

Mulaine Shih et al.

Summary: This study revisits the meaning of stacking fault energy (SFE) and the assumptions of equilibrium dissociation of lattice dislocations in concentrated alloys, showing that SFE in pure metals is a unique value, but in alloys it has a distribution of values depending on the local atomic environment. By using atomistic simulations in a model NiCo alloy, researchers found that even the upper bound of SFE distribution alone cannot satisfy the force balance in some cases, indicating the key importance of the dislocation/solute interaction for the accurate assessment of SFE in alloys beyond dilute limit.

NATURE COMMUNICATIONS (2021)

Article Materials Science, Multidisciplinary

Design of refractory compositionally complex alloys with optimal mechanical properties

Alberto Ferrari et al.

Summary: By using an analytical model and first-principles calculations, this study proposed candidate compositionally complex alloys of the Mo-Nb-Ta-W family and predicted their phase diagrams. The results indicated a tendency towards ordering for some alloys, providing suggestions for further experimental validation.

PHYSICAL REVIEW MATERIALS (2021)

Article Engineering, Mechanical

Analysis of strengthening due to grain boundaries and annealing twin boundaries in the CrCoNi medium-entropy alloy

M. Schneider et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

Review Materials Science, Multidisciplinary

High entropy alloys: A focused review of mechanical properties and deformation mechanisms

E. P. George et al.

ACTA MATERIALIA (2020)

Article Multidisciplinary Sciences

Yield strength and misfit volumes of NiCoCr and implications for short-range-order

Binglun Yin et al.

NATURE COMMUNICATIONS (2020)

Article Multidisciplinary Sciences

Short-range order and its impact on the CrCoNi medium-entropy alloy

Ruopeng Zhang et al.

NATURE (2020)

Article Chemistry, Physical

Interdiffusion in Cr-Fe-Co-Ni medium-entropy alloys

A. Durand et al.

INTERMETALLICS (2020)

Article Materials Science, Multidisciplinary

Growth kinetics of σ-phase precipitates and underlying diffusion processes in CrMnFeCoNi high-entropy alloys

Guillaume Laplanche

ACTA MATERIALIA (2020)

Article Nanoscience & Nanotechnology

High-temperature low cycle fatigue behavior of an equiatomic CoCrFeMnNi high-entropy alloy

Kaiju Lu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Article Chemistry, Physical

Local-environment dependence of stacking fault energies in concentrated solid-solution alloys

Shijun Zhao et al.

NPJ COMPUTATIONAL MATERIALS (2019)

Article Chemistry, Physical

Temperature dependence of elastic moduli in a refractory HfNbTaTiZr high-entropy alloy

G. Laplanche et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Article Chemistry, Physical

Toward a Paradigm Shift in Electrocatalysis Using Complex Solid Solution Nanoparticles

Tobias Loeffler et al.

ACS ENERGY LETTERS (2019)

Article Chemistry, Physical

Temperature and load-ratio dependent fatigue-crack growth in the CrMnFeCoNi high-entropy alloy

Keli V. S. Thurston et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Article Multidisciplinary Sciences

Strengthening in multi-principal element alloys with local-chemical-order roughened dislocation pathways

Qing-Jie Li et al.

NATURE COMMUNICATIONS (2019)

Article Materials Science, Multidisciplinary

Dislocation core structures and Peierls stresses of the high-entropy alloy NiCoFeCrMn and its subsystems

Xianglin Liu et al.

MATERIALS & DESIGN (2019)

Article Materials Science, Multidisciplinary

Impact of interstitial C on phase stability and stacking-fault energy of the CrMnFeCoNi high-entropy alloy

Yuji Ikeda et al.

PHYSICAL REVIEW MATERIALS (2019)

Article Chemistry, Physical

On the prediction and the formation of the sigma phase in CrMnCoFeNix high entropy alloys

K. A. Christofidou et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Article Materials Science, Multidisciplinary

Critical stress for twinning nucleation in CrCoNi-based medium and high entropy alloys

He Huang et al.

ACTA MATERIALIA (2018)

Article Materials Science, Multidisciplinary

Bulk tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys

M. Vaidya et al.

ACTA MATERIALIA (2018)

Article Chemistry, Physical

Stacking fault energy of face-centered-cubic high entropy alloys

S. F. Liu et al.

INTERMETALLICS (2018)

Article Chemistry, Physical

Atomic-scale investigation of fast oxidation kinetics of nanocrystalline CrMnFeCoNi thin films

Y. J. Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Article Multidisciplinary Sciences

Twinning in metastable high-entropy alloys

Shuo Huang et al.

NATURE COMMUNICATIONS (2018)

Article Multidisciplinary Sciences

Magnetically-driven phase transformation strengthening in high entropy alloys

Changning Niu et al.

NATURE COMMUNICATIONS (2018)

Article Materials Science, Multidisciplinary

Phase stability and kinetics of a sigma-phase precipitation in CrMnFeCoNi high-entropy alloys

G. Laplanche et al.

ACTA MATERIALIA (2018)

Article Multidisciplinary Sciences

Thermal spin fluctuations in CoCrFeMnNi high entropy alloy

Zhihua Dong et al.

SCIENTIFIC REPORTS (2018)

Article Chemistry, Physical

Effect of temperature on the fatigue-crack growth behavior of the high-entropy alloy CrMnFeCoNi

Keli V. S. Thurston et al.

INTERMETALLICS (2017)

Article Materials Science, Multidisciplinary

Microstructures and deformation mechanisms of Cr26Mn20Fe20Co20Ni14 alloys

Kaisheng Ming et al.

MATERIALS CHARACTERIZATION (2017)

Article Materials Science, Multidisciplinary

Magnetic properties of the CrMnFeCoNi high-entropy alloy

Oldrich Schneeweiss et al.

PHYSICAL REVIEW B (2017)

Article Materials Science, Multidisciplinary

Ab initio assisted design of quinary dual-phase high-entropy alloys with transformation-induced plasticity

Zhiming Li et al.

ACTA MATERIALIA (2017)

Article Materials Science, Multidisciplinary

Stacking fault energies of face-centered cubic concentrated solid solution alloys

Shijun Zhao et al.

ACTA MATERIALIA (2017)

Article Chemistry, Physical

Microstructure and corrosion properties of CrMnFeCoNi high entropy alloy coating

Qingfeng Ye et al.

APPLIED SURFACE SCIENCE (2017)

Article Materials Science, Multidisciplinary

Atomic-scale characterization and modeling of 60° dislocations in a high-entropy alloy

T. M. Smith et al.

ACTA MATERIALIA (2016)

Article Materials Science, Multidisciplinary

Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy

G. Laplanche et al.

ACTA MATERIALIA (2016)

Article Metallurgy & Metallurgical Engineering

Oxidation Behavior of the CrMnFeCoNi High-Entropy Alloy

G. Laplanche et al.

OXIDATION OF METALS (2016)

Article Nanoscience & Nanotechnology

Slip nucleation in single crystal FeNiCoCrMn high entropy alloy

L. Patriarca et al.

SCRIPTA MATERIALIA (2016)

Article Materials Science, Multidisciplinary

Impact of local magnetism on stacking fault energies: A first-principles investigation for fcc iron

I. Bleskov et al.

PHYSICAL REVIEW B (2016)

Article Materials Science, Multidisciplinary

Insights into the phase diagram of the CrMnFeCoNi high entropy alloy

Mathilde Laurent-Brocq et al.

ACTA MATERIALIA (2015)

Article Physics, Applied

Treasure maps for magnetic high-entropy-alloys from theory and experiment

F. Kormann et al.

APPLIED PHYSICS LETTERS (2015)

Article Chemistry, Physical

Polycrystalline elastic moduli of a high-entropy alloy at cryogenic temperatures

A. Haglund et al.

INTERMETALLICS (2015)

Article Chemistry, Physical

Microstructural evolution of a CoCrFeMnNi high-entropy alloy after swaging and annealing

G. Laplanche et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Article Nanoscience & Nanotechnology

Tensile properties of low-stacking fault energy high-entropy alloys

A. J. Zaddach et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Article Nanoscience & Nanotechnology

Temperature dependent stacking fault energy of FeCrCoNiMn high entropy alloy

Shuo Huang et al.

SCRIPTA MATERIALIA (2015)

Article Chemistry, Physical

Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy

P. P. Bhattacharjee et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

Article Multidisciplinary Sciences

A fracture-resistant high-entropy alloy for cryogenic applications

Bernd Gludovatz et al.

SCIENCE (2014)

Article Materials Science, Multidisciplinary

Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys

K. -Y. Tsai et al.

ACTA MATERIALIA (2013)

Article Chemistry, Physical

Tensile properties of high- and medium-entropy alloys

A. Gali et al.

INTERMETALLICS (2013)

Article Materials Science, Multidisciplinary

Mechanical Properties and Stacking Fault Energies of NiFeCrCoMn High-Entropy Alloy

A. J. Zaddach et al.

Article Computer Science, Interdisciplinary Applications

GIBBs2: A new version of the quasi-harmonic model code. I. Robust treatment of the static data

A. Otero-de-la-Roza et al.

COMPUTER PHYSICS COMMUNICATIONS (2011)

Article Materials Science, Multidisciplinary

Temperature-induced longitudinal spin fluctuations in Fe and Ni

A. V. Ruban et al.

PHYSICAL REVIEW B (2007)

Article Materials Science, Multidisciplinary

Effect of nitrogen on generalized stacking fault energy and stacking fault widths in high nitrogen steels

S. Kibey et al.

ACTA MATERIALIA (2006)

Article Materials Science, Multidisciplinary

Magnetostriction in Fe-based alloys and the origin of the Invar anomaly

S Khmelevskyi et al.

PHYSICAL REVIEW B (2004)

Article Nanoscience & Nanotechnology

Microstructural development in equiatomic multicomponent alloys

B Cantor et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

Article Physics, Multidisciplinary

Anisotropic lattice distortions in random alloys from first-principles theory

L Vitos et al.

PHYSICAL REVIEW LETTERS (2001)

Article Nanoscience & Nanotechnology

Temperature dependence of the elastic moduli of the nickel-base superalloy CMSX-4 and its isolated phases

D Siebörger et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)

Article Materials Science, Multidisciplinary

Application of the exact muffin-tin orbitals theory:: the spherical cell approximation

L Vitos et al.

COMPUTATIONAL MATERIALS SCIENCE (2000)