4.7 Article

Designing structures with combined gradients of grain size and precipitation in high entropy alloys for simultaneous improvement of strength and ductility

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Multidisciplinary Sciences

Direct observation of chemical short-range order in a medium-entropy alloy

Xuefei Chen et al.

Summary: The study provides direct experimental evidence of chemical short-range atomic-scale ordering (CSRO) in a VCoNi medium-entropy alloy through diffraction and electron microscopy analysis. The research demonstrates that using specific crystallographic directions can reveal CSRO in face-centred-cubic VCoNi concentrated solution, offering insights into atomic packing configuration and dislocation interactions enhanced by CSROs.

NATURE (2021)

Article Engineering, Mechanical

Strain partitioning enables excellent tensile ductility in precipitated heterogeneous high-entropy alloys with gigapascal yield strength

Feng He et al.

Summary: A Ni2CoCrFeTi0.24Al0.2 HEA was developed with a yield strength of approximately 1.3 GPa and tensile elongation of 20% through single-step heat treatment. The excellent strength-ductility combination is attributed to the grain scale heterogeneous structure with L1(2) precipitates ranging from 10 to 100 nm. Additionally, the efficient hetero-deformation induced strain hardening effect allows for the good ductility of the HEA.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

Article Materials Science, Multidisciplinary

Deformation induced hcp nano-lamella and its size effect on the strengthening in a CoCrNi medium-entropy alloy

Yan Ma et al.

Summary: Deformation-induced hcp nano-lamellae were observed in the CoCrNi medium-entropy alloy under high strain rate and cryogenic temperature, leading to higher hardness compared to room temperature-deformed samples. Molecular dynamics simulations revealed that both phase strengthening and extra interface strengthening contribute to the overall strengthening, with the interface strengthening always stronger. Samples with smaller interspacing of hcp nano-lamellae showed higher strength due to increased density of phase boundaries and newly formed twin boundaries.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Multidisciplinary Sciences

Bifunctional nanoprecipitates strengthen and ductilize a medium-entropy alloy

Ying Yang et al.

Summary: This study demonstrates a strategy of using nanoprecipitates to enhance the strength of the matrix while modulating its transformation characteristics, leading to simultaneous improvements in tensile strength and ductility in a single alloy.

NATURE (2021)

Article Multidisciplinary Sciences

Hierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys

Peijian Shi et al.

Summary: The study demonstrates a directionally solidified eutectic high-entropy alloy with a hierarchically organized herringbone structure that reconciles crack tolerance and high elongation. The self-buffering herringbone material achieves an ultrahigh uniform tensile elongation while maintaining strength.

SCIENCE (2021)

Article Multidisciplinary Sciences

Gradient cell-structured high-entropy alloy with exceptional strength and ductility

Qingsong Pan et al.

Summary: By introducing gradient nanoscaled dislocation cell structures in stable single-phase HEAs, enhanced strength can be achieved without apparent loss of ductility. The gradient structure induces the formation of high-density tiny stacking faults and twins, contributing to improved plasticity, increased strength, and work hardening.

SCIENCE (2021)

Article Nanoscience & Nanotechnology

Deformation nanotwins suppress shear banding during impact test of CrCoNi medium-entropy alloy

Xiaolei Wu et al.

SCRIPTA MATERIALIA (2020)

Article Multidisciplinary Sciences

Short-range order and its impact on the CrCoNi medium-entropy alloy

Ruopeng Zhang et al.

NATURE (2020)

Article Materials Science, Multidisciplinary

Short-range chemical order and local lattice distortion in a compositionally complex alloy

Andrea Fantin et al.

ACTA MATERIALIA (2020)

Article Nanoscience & Nanotechnology

Strain rate dependent shear localization and deformation mechanisms in the CrMnFeCoNi high-entropy alloy with various microstructures

Zhengling Yang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Article Multidisciplinary Sciences

Ultrastrong lightweight compositionally complex steels via dual-nanoprecipitation

Zhangwei Wang et al.

SCIENCE ADVANCES (2020)

Article Materials Science, Multidisciplinary

Perspective on hetero-deformation induced (HDI) hardening and back stress

Yuntian Zhu et al.

MATERIALS RESEARCH LETTERS (2019)

Review Nanoscience & Nanotechnology

High-entropy alloys

Easo P. George et al.

NATURE REVIEWS MATERIALS (2019)

Article Nanoscience & Nanotechnology

High impact toughness of CrCoNi medium-entropy alloy at liquid-helium temperature

Muxin Yang et al.

SCRIPTA MATERIALIA (2019)

Article Multidisciplinary Sciences

Strengthening in multi-principal element alloys with local-chemical-order roughened dislocation pathways

Qing-Jie Li et al.

NATURE COMMUNICATIONS (2019)

Article Materials Science, Multidisciplinary

Achieving ultra-high strength and ductility in equiatomic CrCoNi with partially recrystallized microstructures

C. E. Slone et al.

ACTA MATERIALIA (2019)

Article Materials Science, Multidisciplinary

Dynamic shear deformation of a CrCoNi medium-entropy alloy with heterogeneous grain structures

Yan Ma et al.

ACTA MATERIALIA (2018)

Article Multidisciplinary Sciences

Dynamically reinforced heterogeneous grain structure prolongs ductility in a medium-entropy alloy with gigapascal yield strength

Muxin Yang et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2018)

Article Multidisciplinary Sciences

Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys

Jun Ding et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2018)

Article Multidisciplinary Sciences

High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys

Yao-Jian Liang et al.

NATURE COMMUNICATIONS (2018)

Article Multidisciplinary Sciences

Extra strengthening and work hardening in gradient nanotwinned metals

Zhao Cheng et al.

SCIENCE (2018)

Article Materials Science, Multidisciplinary

The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy

J. Miao et al.

ACTA MATERIALIA (2017)

Article Materials Science, Multidisciplinary

Secondary phases in Al CoCrFeNi high-entropy alloys: An in-situ TEM heating study and thermodynamic appraisal

J. C. Rao et al.

ACTA MATERIALIA (2017)

Article Multidisciplinary Sciences

Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures

Bernd Gludovatz et al.

NATURE COMMUNICATIONS (2016)

Article Materials Science, Multidisciplinary

Back stress strengthening and strain hardening in gradient structure

Muxin Yang et al.

MATERIALS RESEARCH LETTERS (2016)

Article Engineering, Mechanical

Gradient plasticity in gradient nano-grained metals

Zhi Zeng et al.

EXTREME MECHANICS LETTERS (2016)

Article Multidisciplinary Sciences

Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility

Xiaolei Wu et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2015)

Article Multidisciplinary Sciences

Extraordinary strain hardening by gradient structure

XiaoLei Wu et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2014)

Article Multidisciplinary Sciences

A fracture-resistant high-entropy alloy for cryogenic applications

Bernd Gludovatz et al.

SCIENCE (2014)

Article Multidisciplinary Sciences

Nanostructural hierarchy increases the strength of aluminium alloys

Peter V. Liddicoat et al.

NATURE COMMUNICATIONS (2010)

Review Materials Science, Multidisciplinary

Mechanical properties of nanocrystalline materials

MA Meyers et al.

PROGRESS IN MATERIALS SCIENCE (2006)

Article Materials Science, Multidisciplinary

Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes

JW Yeh et al.

ADVANCED ENGINEERING MATERIALS (2004)

Article Materials Science, Multidisciplinary

Paradox of strength and ductility in metals processed by severe plastic deformation

RZ Valiev et al.

JOURNAL OF MATERIALS RESEARCH (2002)