☆ 3.8 Article

Metamodels to describe the high temperature deformation behaviour of Al 2014+2wt%TiB2 composite

ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

A parametric study on the design factors influencing the thermal performance of nickel alloy C263 sandwich panels

T. Mahender et al.

Summary: In this study, the effect of six important design parameters on the thermal performance and density of nickel alloy C263 sandwich panels was evaluated using the Taguchi-based design of experiments approach. The results were analyzed using statistical analysis techniques to determine the optimal combination of design parameters and their influence on the performance of the sandwich panels. An algebraic model was used to identify the optimum combination of design parameters that provides the best thermal performance with the lowest density. The results are presented and discussed in this paper.

AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Zr-Nb Alloys and Its Hot Deformation Analysis Approaches

Kuldeep K. Saxena et al.

Summary: Zr and its alloys are strategic materials for the nuclear industry, mainly used to manufacture reactor tubes. The properties of the end component depend on the material processing route and final microstructure, with microstructure control being crucial for optimizing mechanical properties. Understanding the dominant deformation mechanisms during hot deformation is key to controlling the final microstructure and various restoration mechanisms exist for different Zr-alloys. Techniques such as stress-strain analysis and processing maps play a crucial role in studying hot deformation behaviors of materials, and findings from processing maps provide valuable insights for safe processing parameters and activation energies in Zr-Nb alloys.

METALS AND MATERIALS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Comparative study of metamodeling methods for modeling the constitutive relationships of the TC6 titanium alloy

Zenan Shen et al.

Summary: In this study, the flow behavior of TC6 titanium alloy was modeled through experiments and metamodeling methods such as the response surface method, the Kriging method, and the BP neural network. The results showed that these methods outperformed the traditional Arrhenius model, with the response surface and Kriging methods exhibiting better fitting accuracy and stability.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Construction of hot deformation processing maps for 9Cr-1 Mo steel through conventional and ANN approach

Sumit Kumar et al.

Summary: The study analyzed the hot deformed flow curves of a 9Cr-1Mo steel using constitutive and artificial neural network approaches. It compared the corrections of flow stress made by ANN and conventional methods, as well as the predicted flow stress data obtained from established constitutive equation. The results showed that the ANN approach provided more precise results compared to the conventional method, especially when analyzing the safe and unsafe domains of the maps with corresponding microstructures.

MATERIALS TODAY COMMUNICATIONS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

On the optimization of temperature and cooling rate to maximize strength and ductility of near α titanium alloy IMI 834

T. Mahender et al.

Summary: The microstructural features of titanium alloys are influenced by post deformation heat treatment parameters, which in turn affect the mechanical properties. This study evaluated the effects of solution treatment temperature and cooling rate on the microstructure and room temperature tensile properties of an α/β titanium alloy, and attempted to establish the correlation between heat treatment parameters and resulting tensile properties using response surface methodology.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Energy & Fuels

Predictions of elemental composition of coal and biomass from their proximate analyses using ANFIS, ANN and MLR

Abiodun Ismail Lawal et al.

Summary: In this study, predictive models for the elemental composition of coal and biomass were developed using soft computing and regression analyses. Multiple prediction models were established using samples and various prediction performance indices were used to test the reliability of the models, which were found to be satisfactory for practical purposes.

INTERNATIONAL JOURNAL OF COAL SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Constitutive Modelling of a New High-Strength Low-Alloy Steel Using Modified Zerilli-Armstrong and Arrhenius Model

A. Venkata Ramana et al.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Synthesis, Characterization and Mechanical Properties of AA7075 Based MMCs Reinforced with TiB2 Particles Processed Through Ultrasound Assisted In-Situ Casting Technique

Vinod Kumar V. Meti et al.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2018)

添加到收藏夹

Article Chemistry, Physical

A physically-based constitutive modelling of a high strength aluminum alloy at hot working conditions

Hongming Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

On the high temperature deformation behaviour of titanium alloy BT3-1

I. Balasundar et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Development of constitutive relationship and processing map for Al-6. 65Si-0.44Mg alloy and its composite with B4C particulates

S. Gangolu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Constitutive equation for the hot deformation behavior of Csf/AZ91D composites and its validity for numerical simulation

Zhenjun Wang et al.

MECHANICS OF MATERIALS (2016)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Hot Deformation Flow Behaviour Modelling of Cast-Extruded Al 7075 Alloy Using Arrhenius Equations and Artificial Neural Network

L. Saravanan et al.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2016)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Taguchi Based Optimisation of Artificial Neural Network to Establish a Direct Microstructure: Mechanical Property Correlation in a near-α Titanium Alloy

I. Balasundar et al.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Modeling Material Flow Behavior during Hot Deformation Based on Metamodeling Methods

Gang Xiao et al.

MATHEMATICAL PROBLEMS IN ENGINEERING (2015)

添加到收藏夹

Article Chemistry, Physical

Microstructure evolution at the onset of discontinuous dynamic recrystallization: A physics-based model of subgrain critical size

A. Momeni et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Constitutive models for high-temperature flow behaviors of a Ni-based superalloy

Y. C. Lin et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modeling the hot working behavior of near-α titanium alloy IMI 834

I. Balasundar et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Study of hot deformation of an Al-Cu-Mg alloy using processing maps and microstructural characterization

C. M. Cepeda-Jimenez et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Review Materials Science, Multidisciplinary

A critical review of experimental results and constitutive descriptions for metals and alloys in hot working

Y. C. Lin et al.

MATERIALS & DESIGN (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Constitutive modelling for high temperature behavior of 1Cr12Ni3Mo2VNbN martensitic steel

Yan-Hong Xiao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Constitutive modeling for elevated temperature flow behavior of 42CrMo steel

Y. C. Lin et al.

COMPUTATIONAL MATERIALS SCIENCE (2008)

添加到收藏夹

Article Thermodynamics

Optimization of the location of multiple discrete heat sources in a ventilated cavity using artificial neural networks and micro genetic algorithm

Rajeev Reddy Madadi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

The use of artificial neural networks in materials science based research

W. Sha et al.

MATERIALS & DESIGN (2007)

添加到收藏夹

Article Materials Science, Composites

Modeling capability of the artificial neural network (ANN) to predict the effect of the hot deformation parameters on the strength of Al-base metal matrix composites

IS Jalham

COMPOSITES SCIENCE AND TECHNOLOGY (2003)

添加到收藏夹

Review Materials Science, Multidisciplinary

Microstructural and mechanical characteristics of in situ metal matrix composites

SC Tjong et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.