☆ 4.8 Review

3D Printing for Solid-State Energy Storage

SMALL METHODS (2021)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Environmental

2D metal patterns transformed from 3D printed stamps for flexible Zn// MnO2 in-plane micro-batteries

Haoran Wang et al.

Summary: A new printing strategy called transform printing is proposed to print metal patterns on paper and construct Zn//MnO2 in-plane micro-batteries by combining 3D printing and stamping of metal films. The printed metal patterns show high precision and low sheet resistance, leading to the construction of high-performance Zn//MnO2 IMBs with outstanding energy density, power density, long-term cycle stability, and mechanical flexibility. This low-cost and rapid fabrication method provides a new idea for next-generation flexible and wearable electronics.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Direct Ink Writing of Polymer Composite Electrolytes with Enhanced Thermal Conductivities

Meng Cheng et al.

Summary: Proper distribution of thermally conductive nanomaterials in polymer batteries can improve battery performance and safety. This study utilized the DIW method to fabricate CPE with aligned S-hBN platelets, showing higher thermal conductivity and lower peak temperature, leading to enhanced lithium-ion battery performance.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Reaction Mechanism and Structural Evolution of Fluorographite Cathodes in Solid-State K/Na/Li Batteries

Zhengping Ding et al.

Summary: The research reveals a two-phase mechanism during K/Na/Li ion insertion, with crystalline KF forming uniformly within the amorphous carbon matrix, and the diffusion rate of K/Na/Li ions in CFx being comparable to that in liquid-state cells. The study also demonstrates the potential for a rechargeable all-solid-state Li/CFx battery design, showing reversible specific discharge capacity at the 2nd cycle.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Direct Ink Writing of Li1.3Al0.3Ti1.7(PO4)3-Based Solid-State Electrolytes with Customized Shapes and Remarkable Electrochemical Behaviors

Zixian Liu et al.

Summary: Researchers have developed various 3D printable LATP-based inks to construct ceramic and hybrid solid-state electrolytes with high conductivities, achieving high ionic conductivity and the ability to design solid-state electrolytes in arbitrary shapes. This DIW strategy provides a new pathway for advanced solid-state energy storage.

SMALL (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Direct coherent multi-ink printing of fabric supercapacitors

Jingxin Zhao et al.

Summary: A coaxial fiber-shaped asymmetric supercapacitor (FASC) device with superior energy/power density and mechanical stability has been successfully achieved through a new 3D printing technology.

SCIENCE ADVANCES (2021)

添加到收藏夹

Article Chemistry, Physical

3D Printing Lithium Salt towards Dendrite-free Lithium Anodes

Kai Shen et al.

Summary: The use of 3D printed LiF scaffolds and Li-Mg alloy has led to the development of a high-performance and long-lasting lithium anode, promoting uniform nucleation and growth of lithium.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Direct Printable Proton-Conducting Nanocomposite Inks for All-Quasi-Solid-State Electrochemical Capacitors

Kazuyuki Iwase et al.

Summary: This study developed a 3D printing technique using functional inks for the fabrication of proton exchange membranes, with the viscosity of inks adjusted by the mixing ratio of precursors. The UV-cured 3D-printed inks were confirmed to function as proton exchange membranes in all-solid-state electro-chemical double-layer capacitors.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

3D Printed Lithium-Metal Full Batteries Based on a High-Performance Three-Dimensional Anode Current Collector

Chenglong Chen et al.

Summary: A 3D printing method has been developed to prepare a lithium anode on structured copper mesh current collectors, showing excellent deposition and stripping capability, high-rate capability, and long-term stable cycle performance. This method also has the potential for mass production of electrodes, showing promising practical applications for high energy density lithium-metal batteries.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tailoring Pore Structures of 3D Printed Cellular High-Loading Cathodes for Advanced Rechargeable Zinc-Ion Batteries

Hui Ma et al.

Summary: Developing high-loading cathodes with superior electrochemical performance in aqueous zinc-ion batteries is desirable but challenging. Advanced 3D printing of composite cathodes with unique structures enables high specific capacity and outstanding cycling stability, paving the way for designing state-of-the-art cathodes for ZIBs.

SMALL (2021)

添加到收藏夹

Article Chemistry, Physical

MXene and MoS3-x Coated 3D-Printed Hybrid Electrode for Solid-State Asymmetric Supercapacitor

Kalyan Ghosh et al.

Summary: Recent research has focused on the use of 2D nanomaterials such as MXenes and TMDs in energy storage devices due to their excellent properties. Asymmetric supercapacitors have been fabricated to address the energy density limitations of MXene, providing a wide potential window electrolyte for potential use in modern electronics. Through the combination of MXene and electroactive 3D-printed nanocarbon framework, customized ASCs exhibit excellent capacitive performance, showing promise for energy storage in electronic applications.

SMALL METHODS (2021)

添加到收藏夹

Review Chemistry, Physical

3D printing-enabled advanced electrode architecture design

Tiankuo Chu et al.

Summary: This paper reviews recent studies on advanced electrode architecture design and manufacturing enabled by emerging additive manufacturing techniques for future high-performance energy storage devices. It highlights the importance of advanced electrode structure in promoting the performance of energy storage devices and summarizes the latest research on 3D printed electrodes.

CARBON ENERGY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Free-standing electrochemically coated MoSx based 3D-printed nanocarbon electrode for solid-state supercapacitor application

Kalyan Ghosh et al.

Summary: This study investigates the integration of 3D printing and room-temperature electrodeposition techniques for the simple fabrication of customized free-standing 3D electrodes for supercapacitor applications.

NANOSCALE (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Direct ink writing of energy materials

S. Tagliaferri et al.

Summary: This review discusses the application of 3D printing technology in sustainable energy device fabrication, focusing on the growth of extrusion-based 3D printing in manufacturing batteries, supercapacitors, and catalytic systems. The critical role of ink formulation and rheological characteristics on the functional performance of printed devices is emphasized, along with a review of strategies for obtaining printable inks from energy materials and the challenges and opportunities for future development.

MATERIALS ADVANCES (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

An Overview of Fiber-Shaped Batteries with a Focus on Multifunctionality, Scalability, and Technical Difficulties

Funian Mo et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D Printing of Additive-Free 2D Ti3C2Tx (MXene) Ink for Fabrication of Micro-Supercapacitors with Ultra-High Energy Densities

Jafar Orangi et al.

ACS NANO (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Direct Graphene-Carbon Nanotube Composite Ink Writing All-Solid-State Flexible Microsupercapacitors with High Areal Energy Density

Yaling Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Nanomaterial Patterning in 3D Printing

Brian Elder et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

From Solid-Solution Electrodes and the Rocking-Chair Concept to Today's Batteries

Heng Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Safe Polyzwitterionic Hydrogel Electrolyte for Long-Life Quasi-Solid State Zinc Metal Batteries

Kaitong Leng et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Flexible Ceramic/Polymer Hybrid Solid Electrolyte for Solid-State Lithium Metal Batteries

Kecheng Pan et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D Printed Compressible Quasi-Solid-State Nickel-Iron Battery

Dezhi Kong et al.

ACS NANO (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Evolution of 3D Printing Methods and Materials for Electrochemical Energy Storage

Vladimir Egorov et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Engineering, Environmental

Sandwich structured NASICON-type electrolyte matched with sulfurized polyacrylonitrile cathode for high performance solid-state lithium-sulfur batteries

Yu Wang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

500 Wh kg-1Class Li Metal Battery Enabled by a Self-Organized Core-Shell Composite Anode

Bing Han et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Stereolithography Three-Dimensional Printing Solid Polymer Electrolytes for All-Solid-State Lithium Metal Batteries

Yingjie He et al.

NANO LETTERS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Creep-Enabled 3D Solid-State Lithium-Metal Battery

Ziqiang Wang et al.

CHEM (2020)

添加到收藏夹

Article Chemistry, Physical

Boosting areal energy density of 3D printed all-solid-state flexible microsupercapacitors via tailoring graphene composition

Yaling Wang et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Review Polymer Science

Revisiting Classical Rocking Chair Lithium-Ion Battery

Sungho Choi et al.

MACROMOLECULAR RESEARCH (2020)

添加到收藏夹

Review Engineering, Manufacturing

Rapid manufacturing of automotive polymer series parts: A systematic review of processes, materials and challenges

Mathias Wiese et al.

ADDITIVE MANUFACTURING (2020)

添加到收藏夹

Article Engineering, Manufacturing

3D printed supercapacitor using porous carbon derived from packaging waste

Mohanad Idrees et al.

ADDITIVE MANUFACTURING (2020)

添加到收藏夹

Review Nanoscience & Nanotechnology

Recent progresses of 3D printing technologies for structural energy storage devices

L. Zeng et al.

MATERIALS TODAY NANO (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Three -Dimensional Microbatteries beyond Lithium Ion

Jiangfeng Ni et al.

MATTER (2020)

添加到收藏夹

Review Electrochemistry

3D Printing of Electrochemical Energy Storage Devices: A Review of Printing Techniques and Electrode/Electrolyte Architectures

Meng Cheng et al.

BATTERIES & SUPERCAPS (2020)

添加到收藏夹

Article Chemistry, Physical

A 3D-printed ultra-high Se loading cathode for high energy density quasi-solid-state Li-Se batteries

Xuejie Gao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Chemistry, Physical

Direct ink writing advances in multi-material structures for a sustainable future

Victoria G. Rocha et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Chemistry, Physical

Robust pure copper framework by extrusion 3D printing for advanced lithium metal anodes

Gwendolyn J. H. Lim et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Review Chemistry, Physical

Design Principles of the Anode-Electrolyte Interface for All Solid-State Lithium Metal Batteries

Zeyu Shen et al.

SMALL METHODS (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

3D printing of cellular materials for advanced electrochemical energy storage and conversion

Xiaocong Tian et al.

NANOSCALE (2020)

添加到收藏夹

Article Electrochemistry

Poly(Ethylene Oxide)-LiTFSI Solid Polymer Electrolyte Filaments for Fused Deposition Modeling Three-Dimensional Printing

Alexis Maurel et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

A mini-review: emerging all-solid-state energy storage electrode materials for flexible devices

Yang Yang

NANOSCALE (2020)

添加到收藏夹

Article Chemistry, Physical

3D printing-based cellular microelectrodes for high-performance asymmetric quasi-solid-state micro-pseudocapacitors

Teng Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Voltage issue of aqueous rechargeable metal-ion batteries

Zhuoxin Liu et al.

CHEMICAL SOCIETY REVIEWS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Rational Design of a Composite Electrode to Realize a High-Performance All-Solid-State Battery

KyungSu Kim et al.

CHEMSUSCHEM (2019)

添加到收藏夹

Article Chemistry, Physical

Structure-designed fabrication of all-printed flexible in-plane solid-state supercapacitors for wearable electronics

Li Liu et al.

JOURNAL OF POWER SOURCES (2019)

添加到收藏夹

Review Polymer Science

FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties

Valentina Mazzanti et al.

POLYMERS (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Digital Printing of Solid-State Lithium-Ion Batteries

L. Jay Deiner et al.

ADVANCED ENGINEERING MATERIALS (2019)

添加到收藏夹

Article Pharmacology & Pharmacy

Direct powder extrusion 3D printing: Fabrication of drug products using a novel single-step process

Alvaro Goyanes et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)

添加到收藏夹

Article Chemistry, Physical

Reconfigurable solid-state electrolytes for high performance flexible supercapacitor

Sanghyun Hong et al.

JOURNAL OF POWER SOURCES (2019)

添加到收藏夹

Review Engineering, Manufacturing

Binder jetting: A review of process, materials, and methods

Mohsen Ziaee et al.

ADDITIVE MANUFACTURING (2019)

添加到收藏夹

Article Chemistry, Physical

Boosting capacitive charge storage of 3D-printed micro-pseudocapacitors via rational holey graphene engineering

Xiaocong Tian et al.

CARBON (2019)

添加到收藏夹

Article Chemistry, Physical

MXene-Conducting Polymer Asymmetric Pseudocapacitors

Muhammad Boota et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent Advances in Energy Chemistry between Solid-State Electrolyte and Safe Lithium-Metal Anodes

Xin-Bing Cheng et al.

CHEM (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D Printed High-Performance Lithium Metal Microbatteries Enabled by Nanocellulose

Daxian Cao et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Customizing a Li-metal battery that survives practical operating conditions for electric vehicle applications

Jang-Yeon Hwang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

添加到收藏夹

Article Chemistry, Physical

3D Printing of Hierarchical Graphene Lattice for Advanced Na Metal Anodes

Yikang Yu et al.

ACS APPLIED ENERGY MATERIALS (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Functional Hydrogels for Next-Generation Batteries and Supercapacitors

Youhong Guo et al.

TRENDS IN CHEMISTRY (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Layered coating of ultraflexible graphene-based electrodes for high-performance in-plane quasi-solid-state micro-supercapacitors

Jingwei Du et al.

NANOSCALE (2019)

添加到收藏夹

Article Chemistry, Physical

High-Energy Li Metal Battery with Lithiated Host

Long Chen et al.

JOULE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Direct 3D Printing of Ultralight Graphene Oxide Aerogel Microlattices

Yanqiu Jiang et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

30 Years of Lithium-Ion Batteries

Matthew Li et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D-Printing Electrolytes for Solid-State Batteries

Dennis W. McOwen et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Hybrid electrolytes with 3D bicontinuous ordered ceramic and polymer microchannels for all-solid-state batteries

Stefanie Zekoll et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

3D Printing Quasi-Solid-State Asymmetric Micro-Supercapacitors with Ultrahigh Areal Energy Density

Kai Shen et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Review Chemistry, Physical

Solid-State Sodium Batteries

Chenglong Zhao et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Boosted crystalline/amorphous Fe2O3-delta core/shell heterostructure for flexible solid-state pseudocapacitors in large scale

Shuo Sun et al.

NANO ENERGY (2018)

添加到收藏夹

Article Chemistry, Physical

A durable and safe solid-state lithium battery with a hybrid electrolyte membrane

Wenqiang Zhang et al.

NANO ENERGY (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

A cost and resource analysis of sodium-ion batteries

Christoph Vaalma et al.

NATURE REVIEWS MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Elevated-Temperature 3D Printing of Hybrid Solid-State Electrolyte for Li-Ion Batteries

Meng Cheng et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Hierarchically Designed Electron Paths in 3D Printed Energy Storage Devices

Seong Hyeon Park et al.

LANGMUIR (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Additive manufacturing of complex micro-architected graphene aerogels

Ryan M. Hensleigh et al.

MATERIALS HORIZONS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D Printing Fiber Electrodes for an All-Fiber Integrated Electronic Device via Hybridization of an Asymmetric Supercapacitor and a Temperature Sensor

Jingxin Zhao et al.

ADVANCED SCIENCE (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Power Aqueous Zinc-Ion Batteries for Customized Electronic Devices

Chanhoon Kim et al.

ACS NANO (2018)

添加到收藏夹

Article Chemistry, Physical

3D printed separator for the thermal management of high-performance Li metal anodes

Yang Liu et al.

ENERGY STORAGE MATERIALS (2018)

添加到收藏夹

Review Chemistry, Physical

Advancing Lithium Metal Batteries

Bin Liu et al.

JOULE (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Silica Nanoparticle-Induced Structural Reorganizations in Pulmonary Surfactant Films: What Monolayer Compression Isotherms Do Not Say

Olga Borozenko et al.

ACS APPLIED NANO MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Progress in 3D Printing of Carbon Materials for Energy-Related Applications

Kun Fu et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Review Chemistry, Physical

Nature-Inspired Electrochemical Energy-Storage Materials and Devices

Hua Wang et al.

ADVANCED ENERGY MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

Safety of solid-state Li metal battery: Solid polymer versus liquid electrolyte

Alexis Perea et al.

JOURNAL OF POWER SOURCES (2017)

添加到收藏夹

Review Chemistry, Physical

3D direct writing fabrication of electrodes for electrochemical storage devices

Min Wei et al.

JOURNAL OF POWER SOURCES (2017)

添加到收藏夹

Article Electrochemistry

Freeze Tape Cast Thick Mo Doped Li4Ti5O12 Electrodes for Lithium-Ion Batteries

Milad Azami Ghadkolai et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

添加到收藏夹

Article Chemistry, Physical

3D Printable Ceramic-Polymer Electrolytes for Flexible High-Performance Li-Ion Batteries with Enhanced Thermal Stability

Aaron J. Blake et al.

ADVANCED ENERGY MATERIALS (2017)

添加到收藏夹

Review Chemistry, Physical

Emerging 3D-Printed Electrochemical Energy Storage Devices: A Critical Review

Xiaocong Tian et al.

ADVANCED ENERGY MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

A low-cost wearable yarn supercapacitor constructed by a highly bended polyester fiber electrode and flexible film

Si-Wen Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Direct ink writing of zirconia three-dimensional structures

Jingjing Liao et al.

JOURNAL OF MATERIALS CHEMISTRY C (2017)

添加到收藏夹

Review Chemistry, Physical

3D printing technologies for electrochemical energy storage

Feng Zhang et al.

NANO ENERGY (2017)

添加到收藏夹

Article Chemistry, Physical

Multi hierarchical construction-induced superior capacitive performances of flexible electrodes for wearable energy storage

Liubing Dong et al.

NANO ENERGY (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

An Outlook on Lithium Ion Battery Technology

Arumugam Manthiram

ACS CENTRAL SCIENCE (2017)

添加到收藏夹

Article Energy & Fuels

The future cost of electrical energy storage based on experience rates

O. Schmidt et al.

NATURE ENERGY (2017)

添加到收藏夹

Article Energy & Fuels

Energy storage deployment and innovation for the clean energy transition

Noah Kittner et al.

NATURE ENERGY (2017)

添加到收藏夹

Review Chemistry, Multidisciplinary

Three-Dimensional Porous Graphene Networks and Hybrids for Lithium-Ion Batteries and Supercapacitors

Xin Yao et al.

CHEM (2017)

添加到收藏夹

Article Engineering, Manufacturing

Performance evaluation of ProJet multi-material jetting 3D printer

Hongyi Yang et al.

VIRTUAL AND PHYSICAL PROTOTYPING (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D-Printed All-Fiber Li-Ion Battery toward Wearable Energy Storage

Yibo Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Breathable and Wearable Energy Storage Based on Highly Flexible Paper Electrodes

Liubing Dong et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Graphene Oxide-Based Electrode Inks for 3D-Printed Lithium-Ion Batteries

Kun Fu et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Review Chemistry, Multidisciplinary

3D-printing technologies for electrochemical applications

Adriano Ambrosi et al.

CHEMICAL SOCIETY REVIEWS (2016)

添加到收藏夹

Review Chemistry, Inorganic & Nuclear

Metal-organic frameworks for energy storage: Batteries and supercapacitors

Lu Wang et al.

COORDINATION CHEMISTRY REVIEWS (2016)

添加到收藏夹

Article Electrochemistry

Ionogel-based solid-state supercapacitor operating over a wide range of temperature

L. Negre et al.

ELECTROCHIMICA ACTA (2016)

添加到收藏夹

Article Chemistry, Physical

Wearable Textile-Based In-Plane Microsupercapacitors

Xiong Pu et al.

ADVANCED ENERGY MATERIALS (2016)

添加到收藏夹

Article Chemistry, Physical

Fiber-shaped solid-state supercapacitors based on molybdenum disulfide nanosheets for a self-powered photodetecting system

Xuelian Li et al.

NANO ENERGY (2016)

添加到收藏夹

Review Chemistry, Multidisciplinary

Atomic Layer Deposition for Lithium-Based Batteries

Lu Ma et al.

ADVANCED MATERIALS INTERFACES (2016)

添加到收藏夹

Article Chemistry, Physical

Solid-state electric double layer capacitors for ac line-filtering

Han Gao et al.

ENERGY STORAGE MATERIALS (2016)

添加到收藏夹

Article Electrochemistry

Additive Manufacturing: Rethinking Battery Design

Corie L. Cobb et al.

ELECTROCHEMICAL SOCIETY INTERFACE (2016)

添加到收藏夹

Article Chemistry, Physical

Printing nanostructured carbon for energy storage and conversion applications

Stephen Lawes et al.

CARBON (2015)

添加到收藏夹

Review Chemistry, Physical

A review of lithium and non-lithium based solid state batteries

Joo Gon Kim et al.

JOURNAL OF POWER SOURCES (2015)

添加到收藏夹

Article Chemistry, Physical

Three-dimensional Co3O4@C@Ni3S2 sandwich-tructured nanoneedle arrays: towards high-performance flexible all-solid-state asymmetric supercapacitors

Dezhi Kong et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Superior Ion-Conducting Hybrid Solid Electrolyte for All-Solid-State Batteries

Jae-Kwang Kim et al.

CHEMSUSCHEM (2015)

添加到收藏夹

Article Engineering, Manufacturing

3D printing in aerospace and its long-term sustainability

Sunil C. Joshi et al.

VIRTUAL AND PHYSICAL PROTOTYPING (2015)

添加到收藏夹

Review Chemistry, Multidisciplinary

Nanowire Electrodes for Electrochemical Energy Storage Devices

Liqiang Mai et al.

CHEMICAL REVIEWS (2014)

添加到收藏夹

Review Chemistry, Multidisciplinary

Flexible solid-state supercapacitors: design, fabrication and applications

Xihong Lu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

添加到收藏夹

Review Chemistry, Physical

Flexible solid-state electrochemical supercapacitors

Peihua Yang et al.

NANO ENERGY (2014)

添加到收藏夹

Editorial Material Multidisciplinary Sciences

Valuing Reversible Energy Storage

John R. Miller

SCIENCE (2012)

添加到收藏夹

Proceedings Paper Chemistry, Physical

Laser-Based Additive Manufacturing of Metals

Sanjay Kumar et al.

LASER AND PLASMA APPLICATIONS IN MATERIALS SCIENCE (2011)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent advances in rechargeable battery materials: a chemist's perspective

M. Rosa Palacin

CHEMICAL SOCIETY REVIEWS (2009)

添加到收藏夹

Article Electrochemistry

Mechanical and electrical properties of a LiCoO2 cathode prepared by screen-printing for a lithium-ion micro-battery

Moon-Soo Park et al.

ELECTROCHIMICA ACTA (2007)

添加到收藏夹

Article Chemistry, Multidisciplinary

Direct ink writing of 3D functional materials

Jennifer A. Lewis

ADVANCED FUNCTIONAL MATERIALS (2006)

添加到收藏夹

Review Chemistry, Physical

Inkjet printing for materials and devices

P Calvert

CHEMISTRY OF MATERIALS (2001)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A visual simulation technique for 3D printing

HJ Jee et al.

ADVANCES IN ENGINEERING SOFTWARE (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.