相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Testing of hot-finished high strength steel SHS and RHS under combined compression and bending
Xin Meng et al.
THIN-WALLED STRUCTURES (2020)
Experimental study of the cross-sectional capacity of cold-formed steel built-up columns
Francisco J. Meza et al.
THIN-WALLED STRUCTURES (2020)
An energy-based approach to buckling modal decomposition of thin-walled members with arbitrary cross sections, Part 1: Derivation
M. Khezri et al.
THIN-WALLED STRUCTURES (2019)
An energy-based approach to buckling modal decomposition of thin-walled members with arbitrary cross-sections, Part 2: Modified global torsion modes, examples
M. Khezri et al.
THIN-WALLED STRUCTURES (2019)
Use of 3D laser scanning on evaluating reduction of initial geometric imperfection of steel column with pre-stressed CFRP
Peng Feng et al.
ENGINEERING STRUCTURES (2019)
Experimental and numerical investigation into the behaviour of face-to-face built-up cold-formed steel channel sections under compression
Krishanu Roy et al.
THIN-WALLED STRUCTURES (2019)
Geometric Imperfection Measurements and Validations on Cold-Formed Steel Channels Using 3D Noncontact Laser Scanner
Sivaganesh Selvaraj et al.
JOURNAL OF STRUCTURAL ENGINEERING (2018)
Constrained shell Finite Element Method for thin-walled members, Part 1: constraints for a single band of finite elements
Sandor Adany
THIN-WALLED STRUCTURES (2018)
Constrained shell Finite Element Method, Part 2: application to linear buckling analysis of thin-walled members
Sandor Adany et al.
THIN-WALLED STRUCTURES (2018)
A force-based method for identifying the deformation modes of thin-walled members
Sheng Lin et al.
THIN-WALLED STRUCTURES (2018)
Geometric Imperfection Measurements and Validations on Cold-Formed Steel Channels Using 3D Noncontact Laser Scanner
Sivaganesh Selvaraj et al.
JOURNAL OF STRUCTURAL ENGINEERING (2018)
An integrated Terrestrial Laser Scanner (TLS), Deviation Analysis (DA) and Finite Element (FE) approach for health assessment of historical structures. A minaret case study
Mustafa Korumaz et al.
ENGINEERING STRUCTURES (2017)
Identification of buckling modes in generalized spline finite strip analysis of cold-formed steel members
S. S. Ajeesh et al.
THIN-WALLED STRUCTURES (2017)
Laser-based cross-section measurement of cold-formed steel members: Model reconstruction and application
Xi Zhao et al.
THIN-WALLED STRUCTURES (2017)
Resistance of cold-formed high strength steel circular and polygonal sections - Part 1: Experimental investigations
Anh Tuan Tran et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2016)
Harmonic analysis of measured initial geometric imperfections in large spiral welded carbon steel tubes
Adam J. Sadowski et al.
ENGINEERING STRUCTURES (2015)
Development of a Laser-Based Geometric Imperfection Measurement Platform with Application to Cold-Formed Steel Construction
X. Zhao et al.
EXPERIMENTAL MECHANICS (2015)
Local-Global Interaction Buckling of Stainless Steel I-Beams. I: Experimental Investigation
Shuang Niu et al.
JOURNAL OF STRUCTURAL ENGINEERING (2015)
Experimental and numerical estimation of buckling load on unstiffened cylindrical shells using a vibration correlation technique
Mariano A. Arbelo et al.
THIN-WALLED STRUCTURES (2015)
Local-Global Interaction Buckling of Stainless Steel I-Beams. I: Experimental Investigation
Shuang Niu et al.
JOURNAL OF STRUCTURAL ENGINEERING (2015)
A new approach to modal decomposition of buckled shapes
Jurgen Becque
STRUCTURES (2015)
Buckling mode identification of perforated thin-walled members by using GBT and shell FEA
Mihai Nedelcu
THIN-WALLED STRUCTURES (2014)
Generalized constrained finite strip method for thin-walled members with arbitrary cross-section: Secondary modes, orthogonality, examples
Sandor Adany et al.
THIN-WALLED STRUCTURES (2014)
Generalized constrained finite strip method for thin-walled members with arbitrary cross-section: Primary modes
Sandor Adany et al.
THIN-WALLED STRUCTURES (2014)
Modal identification for shell finite element models of thin-walled members in nonlinear collapse analysis
Z. Li et al.
THIN-WALLED STRUCTURES (2013)
GBT-based buckling mode decomposition from finite element analysis of thin-walled members
Mihai Nedelcu
THIN-WALLED STRUCTURES (2012)
Buckling mode identification of thin-walled members by using cFSM base functions
Sandor Adany et al.
THIN-WALLED STRUCTURES (2010)
Historic bridge modelling using laser scanning, ground penetrating radar and finite element methods in the context of structural dynamics
Izabela Lubowiecka et al.
ENGINEERING STRUCTURES (2009)
Experimental investigation of local-overall interaction buckling of stainless steel lipped channel columns
Jurgen Becque et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2009)
Distraction osteogenesis technique using an intramedullary nail and a monolateral external fixator in the reconstruction of massive postosteomyelitis skeletal defects of the femur
Zhihong Li et al.
CANADIAN JOURNAL OF SURGERY (2009)
ZNCC-based template matching using bounded partial correlation
L Di Stefano et al.
PATTERN RECOGNITION LETTERS (2005)
Second-order generalised beam theory for arbitrary orthotropic materials
N Silvestre et al.
THIN-WALLED STRUCTURES (2002)