Production and characterization of the Cr35Fe35V16.5Mo6Ti7.5 high entropy alloy

The microstructure, thermal stability, and mechanical properties of a novel Cr35Fe35V16.5Mo6Ti7.5 high-entropy alloy were studied. The mechanical properties were mapped by nanoindentation, and the results correlated with the microstructure and the Vickers microhardness measurements. The alloy was produced by arc melting in a low pressure He atmosphere. Thermal treatments were performed to study the thermal stability of the alloy. The as-cast microstructure of the alloy exhibited a body-centered cubic phase with morphology of dendrites, outlined by a very thin interdendritic phase with a crystallographic structure compatible with Fe2Ti. The presence of the intermetallic particles was predicted by a free-energy based model, in contrast with the single solid solution alloy predicted by a parameter-based model. The volume fraction of the dendrites in the alloy is -94 % after arc melting. A small fraction of sparse Ti-rich particles, -0.4 vol%, was observed. The thermal treatments produced an increase of the population of Ti-rich particles, the formation of a sigma-phase and nucleation of precipitates enriched with Fe and Ti into the previous dendrites. The material in as-cast condition exhibited a microhardness value of 6.2 &updatedExpOTTOM;& nbsp;0.3 GPa, while the alloy aged at 960 ?degrees C resulted in 7.1 &updatedExpOTTOM;& nbsp;0.4 GPa. Nanoindentations maps showed an excellent correlation with the microstructure, and their statistical analyses yielded a nanohardness mean value of 8.2 &updatedExpOTTOM;& nbsp;0.4 GPa in the dendritic BCC regions of the as-cast and thermal treated samples and 14.1 &updatedExpOTTOM;& nbsp;0.6 GPa for the sigma-phase. The onset of the plastic behavior has been studied by analyzing the pop-in phenomenon observed in the nanoindentation loading curves. For the as-cast alloy, this analysis showed that the elastic-to-plastic transition seems to be triggered by dislocation nucleation. The alloy has a low thermal diffusivity in the measured temperature range that increases on increasing temperature.

Automated summary

This study investigated the microstructure, thermal stability, and mechanical properties of a novel high-entropy alloy. The correlation between mechanical properties and microstructure was examined using nanoindentation and Vickers microhardness measurements. The alloy exhibited a unique microstructure with a body-centered cubic phase and interdendritic phase. Thermal treatments resulted in the formation of intermetallic particles and a sigma-phase. The alloy demonstrated good mechanical properties, as indicated by the hardness values obtained from nanoindentation.