相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Sustainable use of recycled carbon fiber reinforced polymer and crumb rubber in concrete: mechanical properties and ecological evaluation
Chen Xiong et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Life cycle assessment of a cleaner supercritical coal-fired power plant
Rizwan Rasheed et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Mechanical properties of basalt and polypropylene fibre-reinforced alkali-activated slag concrete
Xianyu Zhou et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Experimental investigation on mechanical properties of plain and rubberised concretes with steel-polypropylene hybrid fibre
Emad A. H. Alwesabi et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Research on crumb rubber concrete: From a multi-scale review
Jie Xu et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Properties of high strength polypropylene fiber concrete containing recycled aggregate
Tuqa Waleed Ahmed et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Environmental performance and durability of concrete incorporating waste tire rubber and steel fiber subjected to acid attack
Soudabeh Dezhampanah et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Evaluation of tire rubber surface pre-treatment and silica fume on physical-mechanical behavior and microstructural properties of concrete
Cauana Melo Copetti et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Characteristics of Recycled Polypropylene Fibers as an Addition to Concrete Fabrication Based on Portland Cement
Marcin Malek et al.
MATERIALS (2020)
Experimental investigation on the effect of using crumb rubber and steel fibers on the structural behavior of reinforced concrete beams
Ahmed S. Eisa et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Influence of rubber particles on the properties of foam concrete
Essam Eltayeb et al.
JOURNAL OF BUILDING ENGINEERING (2020)
Long-term mechanical and durable properties of waste tires rubber crumbs replaced GBFS modified concretes
Akram M. Mhaya et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Mechanical properties of high performance concrete reinforced with basalt fiber and polypropylene fiber
Dehong Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Combination effects of rubber and silica fume on the fracture behaviour of steel-fibre recycled aggregate concrete
Jianhe Xie et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Impact resistance of hybrid fibre reinforced concrete containing sisal fibres
Srinivasa Rao Naraganti et al.
AIN SHAMS ENGINEERING JOURNAL (2019)
Impact resistance of fiber-reinforced concrete - A review
Doo-Yeol Yoo et al.
CEMENT & CONCRETE COMPOSITES (2019)
Properties and utilizations of waste tire rubber in concrete: A review
Ayesha Siddika et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Mechanical properties of recycled aggregate concrete containing crumb rubber and polypropylene fiber
F. M. Zahid Hossain et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Characterization and optimization of hardened properties of self-consolidating concrete incorporating recycled steel, industrial steel, polypropylene and hybrid fibers
M. Mastali et al.
COMPOSITES PART B-ENGINEERING (2018)
The durability and environmental properties of self-compacting concrete incorporating cold bonded lightweight aggregates produced from combined industrial solid wastes
P. Tang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
The combined effect of crumb rubber and synthetic fibers on impact resistance of self-consolidating concrete
Basem H. AbdelAleem et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Phase characterizations, physical properties and strength of environment-friendly cold-bonded fly ash lightweight aggregates
Chalermphan Narattha et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Impact response of concrete reinforced with hybrid basalt-polypropylene fibers
Qiang Fu et al.
POWDER TECHNOLOGY (2018)
Experimental investigation on the flexural behavior of steel-polypropylene hybrid fiber reinforced concrete
Biao Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Employing cold bonded pelletization to produce lightweight aggregates from incineration fine bottom ash
P. Tang et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Microstructural and Mineralogical Characterization of Artificially Produced Pellets for Civil Engineering Applications
Niyazi Ugur Kockal et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2017)
Impact Resistance and Mechanical Properties of Self-Consolidating Rubberized Concrete Reinforced with Steel Fibers
Mohamed K. Ismail et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2017)
Impact resistance of polypropylene fiber reinforced concrete two-way slabs
Rajai Z. Al-Rousan et al.
STRUCTURAL ENGINEERING AND MECHANICS (2017)
Mix design and properties of fly ash waste lightweight aggregates in structural lightweight concrete
Manu S. Nadesan et al.
CASE STUDIES IN CONSTRUCTION MATERIALS (2017)
The impact resistance and mechanical properties of concrete reinforced with waste polypropylene carpet fibres
Hossein Mohammadhosseini et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Recycling of non-metallic automotive shredder residues and coal fly-ash in cold-bonded aggregates for sustainable concrete
F. Colangelo et al.
COMPOSITES PART B-ENGINEERING (2017)
Investigation on mechanical properties and microstructure of high performance polypropylene fiber reinforced lightweight aggregate concrete
Jing Jun Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Effect of nano silica on the workability of self-compacting concretes having untreated and, surface treated lightweight aggregates
Erhan Guneyisi et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Crumb rubber used in concrete to provide freeze-thaw protection (optimal particle size)
Alan Richardson et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Recycling of waste tire rubber as aggregate in concrete: durability-related performance
Blessen Skariah Thomas et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Properties of high strength concrete containing scrap tire rubber
Blessen Skariah Thomas et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Mechanical and durability properties of waste rubber fiber concrete with and without silica fume
Trilok Gupta et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Massive volume fly-ash concrete: A more sustainable material with fly ash replacing cement and aggregates
Felipe Rivera et al.
CEMENT & CONCRETE COMPOSITES (2015)
The different properties of lightweight aggregates with the fly ashes of fluidized-bed and mechanical incinerators
Chien-Hsing Lu et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Accelerated curing effects on the mechanical performance of cold bonded and sintered fly ash aggregate concrete
P. Gomathi et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Fatigue performance of rubber-modified recycled aggregate concrete (RRAC) for pavement
Liu Feng et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Impact resistance of concrete containing waste rubber fiber and silica fume
Trilok Gupta et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2015)
Recycling of MSWI fly ash by means of cementitious double step cold bonding pelletization: Technological assessment for the production of lightweight artificial aggregates
Francesco Colangelo et al.
JOURNAL OF HAZARDOUS MATERIALS (2015)
Impact resistance of hybrid fibre-reinforced oil palm shell concrete
Kim Hung Mo et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
High performance concrete under elevated temperatures
Abdullah Huzeyfe Akca et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
A study of the durability properties of waste tire rubber applied to self-compacting concrete
Wang Her Yung et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Characterisation of the behaviour of high performance mortar subjected to high temperatures
S. Djaknoun et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Crumb rubber in concrete: Static and dynamic evaluation
Ali O. Atahan et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Study of impact performance of rubber reinforced concrete
Feng Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Concrete made with used tyre aggregate: durability-related performance
Miguel Bravo et al.
JOURNAL OF CLEANER PRODUCTION (2012)
Characteristics of lightweight fly ash aggregates produced with different binders and heat treatments
Niyazi Ugur Kockal et al.
CEMENT & CONCRETE COMPOSITES (2011)
Permeability properties of self-compacting rubberized concretes
Mehmet Gesoglu et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Durability of lightweight concretes with lightweight fly ash aggregates
Niyazi Ugur Kockal et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Strength and deformability of waste tyre rubber-filled reinforced concrete columns
Ki Sang Son et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Prediction of density and compressive strength for rubberized concrete blocks
Tung-Chai Ling
CONSTRUCTION AND BUILDING MATERIALS (2011)
Strength and elastic properties of structural lightweight concretes
Niyazi Ugur Kockal et al.
MATERIALS & DESIGN (2011)
Compressive strength, abrasion resistance and energy absorption capacity of rubberized concretes with and without slag
Erdogan Ozbay et al.
MATERIALS AND STRUCTURES (2011)
The effects of silica fume and polypropylene fibers on the impact resistance and mechanical properties of concrete
Mahmoud Nili et al.
CONSTRUCTION AND BUILDING MATERIALS (2010)
Effects of lightweight fly ash aggregate properties on the behavior of lightweight concretes
Niyazi Ugur Kockal et al.
JOURNAL OF HAZARDOUS MATERIALS (2010)
Fly ash lightweight aggregates in high performance concrete
O. Kayali
CONSTRUCTION AND BUILDING MATERIALS (2008)
Mechanical, fracture, and microstructural investigations of rubber concrete
M. M. Reda Taha et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2008)
Mechanical properties of concrete containing a high volume of tire-rubber particles
Ali R. Khaloo et al.
WASTE MANAGEMENT (2008)
Effects of fly ash properties on characteristics of cold-bonded fly ash lightweight aggregates
Mehmet Gesoglu et al.
CONSTRUCTION AND BUILDING MATERIALS (2007)
Long-term strength and durability parameters of lightweight concrete in hot regime: importance of initial curing
M. N. Haque et al.
BUILDING AND ENVIRONMENT (2007)
Influence of fineness of fly ash on the aggregate pelletization process
R. Manikandan et al.
CEMENT & CONCRETE COMPOSITES (2007)
Statistical variations in impact resistance of polypropylene fibre-reinforced concrete
A Badr et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2006)
Properties of concrete pedestrian block mixed with crumb rubber
Piti Sukontasukkul et al.
CONSTRUCTION AND BUILDING MATERIALS (2006)
Physico-mechanical properties of aerated cement composites containing shredded rubber waste
A. Benazzouk et al.
CEMENT & CONCRETE COMPOSITES (2006)
Effects of cold-bonded fly ash aggregate properties on the shrinkage cracking of lightweight concretes
Mehmet Gesoglu et al.
CEMENT & CONCRETE COMPOSITES (2006)
Influence of pelletization process on the properties of fly ash aggregates
K. I. Hankrishnan et al.
WASTE MANAGEMENT (2006)
Strength properties of nylon- and polypropylene-fiber-reinforced concretes
PS Song et al.
CEMENT AND CONCRETE RESEARCH (2005)
Assessment of statistical variations in impact resistance of high-strength concrete and high-strength steel fiber-reinforced concrete
PS Song et al.
CEMENT AND CONCRETE RESEARCH (2005)
Statistical analysis of impact strength and strength reliability of steel-polypropylene hybrid fiber-reinforced concrete
PS Song et al.
CONSTRUCTION AND BUILDING MATERIALS (2005)
Properties of lightweight aggregate produced by rapid sintering of incinerator bottom ash
CR Cheeseman et al.
RESOURCES CONSERVATION AND RECYCLING (2005)
A life cycle inventory of coal used for electricity production in Florida
CW Babbitt et al.
JOURNAL OF CLEANER PRODUCTION (2005)
Development of waste tire modified concrete
GQ Li et al.
CEMENT AND CONCRETE RESEARCH (2004)
Properties of rubberized concretes containing silica fume
E Güneyisi et al.
CEMENT AND CONCRETE RESEARCH (2004)
Shrinkage cracking of lightweight concrete made with cold-bonded fly ash aggregates
M Gesoglu et al.
CEMENT AND CONCRETE RESEARCH (2004)
Properties of concrete containing scrap-tire rubber - an overview
R Siddique et al.
WASTE MANAGEMENT (2004)
Finding the optimum binder for fly ash pelletization
JG Yoo et al.
FUEL PROCESSING TECHNOLOGY (2003)
Some characteristics of high strength fiber reinforced lightweight aggregate concrete
O Kayall et al.
CEMENT & CONCRETE COMPOSITES (2003)
Influence of steel fibres on strength and ductility of normal and lightweight high strength concrete
RV Balendran et al.
BUILDING AND ENVIRONMENT (2002)
Potential of fly ash utilisation in India
U Bhattacharjee et al.
ENERGY (2002)
Measurement and statistics of single pellet mechanical strength of differently shaped catalysts
YD Li et al.
POWDER TECHNOLOGY (2000)
Utilization of fly ash by pelletization process;: theory, application areas and research results
G Baykal et al.
RESOURCES CONSERVATION AND RECYCLING (2000)
Proposed mechanism of C-S-H growth tested by soft X-ray microscopy
EM Gartner et al.
CEMENT AND CONCRETE RESEARCH (2000)