4.7 Article

Composite phase change materials of ultra-high molecular weight polyethylene/paraffin wax/carbon nanotubes with high performance and excellent shape stability for energy storage

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Composites

A study on the effect of carbon nanotube surface modification on mechanical and thermal properties of CNT/HDPE nanocomposite

S. Salehi et al.

Summary: This study investigated the effect of carbon nanotube surface modification on the properties of CNT/HDPE nanocomposites, showing that acid-treated CNT can improve the mechanical properties of HDPE while also reducing tensile strength and enhancing fracture toughness. The best dispersion of CNTs in the HDPE matrix was observed in CNT-SA/HDPE nanocomposites.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2021)

Article Energy & Fuels

Applications and technological challenges for heat recovery, storage and utilisation with latent thermal energy storage

Zhi Li et al.

Summary: This article presents a comprehensive review of latent thermal energy storage technology, focusing on medium-high temperature phase change materials. The key points include insights into phase change materials, design of heat exchangers, and applications in various thermal sources such as solar energy and waste heat.

APPLIED ENERGY (2021)

Article Materials Science, Ceramics

Syntheses and characterization of highly transparent ZnAl2O4 ceramic films using poly(acrylamide-co-acrylic acid) assisted microwave approach

Waleed E. Mahmoud

Summary: Zinc aluminate nanopowders were synthesized using a poly(acrylamide-co-acrylic acid) assisted microwave approach, which led to a decrease in particle size and an increase in densification rate. The addition of poly(acrylamide-co-acrylic acid) also lowered the sintering temperature required for full density of the ZnAl2O4 ceramic films.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Article Thermodynamics

Experimental investigation on the enhanced performance of a solar PVT system using micro-encapsulated PCMs

Zaiguo Fu et al.

Summary: This study investigated the performance of a photovoltaic-thermal (PVT) solar system using MPCM slurry as the cooling medium. Results showed that using MPCM slurry can improve the thermal and electrical efficiency of the system compared to using tap water or a system with a PCM layer. The study demonstrated the feasibility of enhancing performance in solar PVT systems by utilizing MPCM slurry.

ENERGY (2021)

Article Green & Sustainable Science & Technology

Modeling and improvement of a packed bed latent heat storage filled with non-spherical encapsulated PCM-Elements

Matti Grabo et al.

Summary: A study on a thermal energy storage system filled with macro-encapsulated latent heat storage elements was conducted. The introduction of capsule designs based on super-ellipsoidal shapes improved heat transfer efficiency. A new model was developed to describe the charging and discharging processes, allowing for accurate prediction of temperature changes and system performance.

RENEWABLE ENERGY (2021)

Article Energy & Fuels

Sponge gourd-bioinspired phase change material with high thermal conductivity and excellent shape-stability

Yanjuan Liang et al.

Summary: A novel phase change material PW/EG@GO with a core-shell structure was prepared, exhibiting enhanced thermal conductivity and shape stability. The material has high latent heat values and thermal stability, making it suitable for thermal energy storage applications.

JOURNAL OF ENERGY STORAGE (2021)

Article Energy & Fuels

Enhanced thermal management performance of comb-like polymer/boron nitride composite phase change materials for the thermoregulated fabric application

Shuqin Li et al.

Summary: A series of PTA/BN composite PCMs with high thermal conductivity and good energy storage capability are developed in this study, showing excellent thermal stability.

JOURNAL OF ENERGY STORAGE (2021)

Review Thermodynamics

Recent developments in thermo-physical property enhancement and applications of solid solid phase change materials A review

Cyril Reuben Raj et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

Review Chemistry, Physical

Nanoencapsulation of phase change materials (PCMs) and their applications in various fields for energy storage and management

Elham Alehosseini et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2020)

Article Chemistry, Physical

Porous Open-Cell UHMWPE: Experimental Study of Structure and Mechanical Properties

Alexei I. Salimon et al.

MATERIALS (2019)

Article Materials Science, Composites

Flexible phase change composite materials with simultaneous light energy storage and light-actuated shape memory capability

Xiao-dong Qi et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Review Engineering, Environmental

Shape-stabilized phase change materials based on porous supports for thermal energy storage applications

Xiubing Huang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Chemistry, Physical

Polyurethane-based flexible and conductive phase change composites for energy conversion and storage

Waseem Aftab et al.

ENERGY STORAGE MATERIALS (2019)

Article Chemistry, Physical

A textile-based SnO2 ultra-flexible electrode for lithium-ion batteries

Xin Min et al.

ENERGY STORAGE MATERIALS (2019)

Review Chemistry, Multidisciplinary

Nanoencapsulation of phase change materials for advanced thermal energy storage systems

E. M. Shchukina et al.

CHEMICAL SOCIETY REVIEWS (2018)

Article Engineering, Manufacturing

An energy-efficient composite by using expanded graphite stabilized paraffin as phase change material

Xi Guo et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

Article Chemistry, Physical

Thermal properties of lauric acid filled in carbon nanotubes as shape-stabilized phase change materials

Yanhui Feng et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2018)

Review Green & Sustainable Science & Technology

Selection principles and thermophysical properties of high temperature phase change materials for thermal energy storage: A review

Gaosheng Wei et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Review Green & Sustainable Science & Technology

Review on thermal conductivity enhancement, thermal properties and applications of phase change materials in thermal energy storage

Yaxue Lin et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Review Green & Sustainable Science & Technology

A review of phase change material and performance enhancement method for latent heat storage system

Y. B. Tao et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Article Nanoscience & Nanotechnology

Microwave resonant sintering of powder metals

K. I. Rybakov et al.

SCRIPTA MATERIALIA (2018)

Article Chemistry, Multidisciplinary

Facile Strategy in Designing Epoxy/Paraffin Multiple Phase Change Materials for Thermal Energy Storage Applications

Qingsong Lian et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Article Engineering, Electrical & Electronic

Electrical properties of conventional and microwave sintered lead free magnetoelectric composites

Renu Rani et al.

INTEGRATED FERROELECTRICS (2018)

Article Materials Science, Multidisciplinary

Porous UHMWPE Membranes and Composites Filled with Carbon Nanotubes: Permeability, Mechanical, and Electrical Properties

Christian Otto et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2017)

Article Automation & Control Systems

Sintering of 17-4PH stainless steel powder assisted by microwave and the gradient of mechanical properties in the sintered body

J. Shi et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

Review Green & Sustainable Science & Technology

Heat transfer enhancement of phase change materials for thermal energy storage applications: A critical review

Nasiru I. Ibrahim et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Review Green & Sustainable Science & Technology

A review on current status and challenges of inorganic phase change materials for thermal energy storage systems

Shamseldin A. Mohamed et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Article Chemistry, Physical

Mechanical properties of surface treated UHMWPE fiber and SiO2 filled PMMA composites

Gang Tang et al.

SURFACE AND INTERFACE ANALYSIS (2017)

Article Materials Science, Composites

Fabrication and properties of graphene oxide-grafted-poly(hexadecyl acrylate) as a solid-solid phase change material

Ruirui Cao et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2017)

Article Nanoscience & Nanotechnology

Epoxy-Based Organogels for Thermally Reversible Light Scattering Films and Form-Stable Phase Change Materials

Julieta Puig et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Energy & Fuels

Encapsulation of phase change materials using rice-husk-char

Wayne Gondora et al.

APPLIED ENERGY (2016)

Article Energy & Fuels

Pumped hydro energy storage in buildings

Guilherme de Oliveira e Silva et al.

APPLIED ENERGY (2016)

Article Construction & Building Technology

Research on the preparation and properties of lauric acid/expanded perlite phase change materials

Liu Jiesheng et al.

ENERGY AND BUILDINGS (2016)

Article Thermodynamics

Effect of porosity of conducting matrix on a phase change energy storage device

Aditya Atal et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

Article Energy & Fuels

Preparation of binary eutectic chloride/expanded graphite as high-temperature thermal energy storage materials

Heqing Tian et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2016)

Article Multidisciplinary Sciences

Pore structure modified diatomite-supported PEG composites for thermal energy storage

Tingting Qian et al.

SCIENTIFIC REPORTS (2016)

Article Chemistry, Physical

Kaolinite stabilized paraffin composite phase change materials for thermal energy storage

Chuanchang Li et al.

APPLIED CLAY SCIENCE (2015)

Article Engineering, Manufacturing

Effects of carbon nanotube aspect ratio on strengthening and tribological behavior of ultra high molecular weight polyethylene composite

R. Manoj Kumar et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

Review Construction & Building Technology

Phase change materials and products for building applications: A state-of-the-art review and future research opportunities

Simen Edsjo Kalnaes et al.

ENERGY AND BUILDINGS (2015)

Article Thermodynamics

Experimental and theoretical analysis of an aluminum foam enhanced phase change thermal storage unit

Evan Fleming et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

Review Multidisciplinary Sciences

Graphene, related two-dimensional crystals, and hybrid systems for energy conversion and storage

Francesco Bonaccorso et al.

SCIENCE (2015)

Article Chemistry, Multidisciplinary

Chitosan as a Sustainable Organocatalyst: A Concise Overview

Abdelkrim El Kadib

CHEMSUSCHEM (2015)

Article Thermodynamics

Effective thermal conductivity of open-cell metal foams' impregnated with pure paraffin for latent heat storage

X. Xiao et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2014)

Article Engineering, Biomedical

The antioxidant and non-antioxidant contributions of vitamin E in vitamin E blended ultra-high molecular weight polyethylene for total knee replacement

Alex Turner et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2014)

Article Thermodynamics

Thermal conductivity of individual multiwalled carbon nanotubes

M. K. Samani et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2012)

Article Polymer Science

Study on molding process of UHMWPE microporous filter materials

Qiang Zhang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2012)

Review Thermodynamics

Organic phase change materials and their textile applications: An overview

Nihal Sarier et al.

THERMOCHIMICA ACTA (2012)