4.7 Article

Why are tensile cracks suppressed under dynamic loading?-Transition strain rate for failure mode

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Energy & Fuels

Mechanical behavior and permeability evolution of sandstone with confining pressure after dynamic loading

Quanqi Zhu et al.

Summary: Permeability, a fundamental index related to rock damage, was studied through dynamic triaxial compression tests on sandstone under various conditions. Results showed that peak stress, strain, plasticity, damage, and permeability increase with higher incident energy. Only peak stress increases with higher confining pressure.

GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES (2021)

Article Engineering, Geological

Progressive Damage Behaviours of Triaxially Confined Rocks under Multiple Dynamic Loads

K. Liu et al.

Summary: Investigating rock progressive damage under static confinement and strain rates using dynamic triaxial compression tests reveals the generation mechanism of natural fault damage zones. The study found that dynamic mechanical properties decrease with increasing impact times, and microcracks primarily propagate along the maximum principal stress, influenced by true triaxial confinement and dynamic impacts. Additionally, different types of rocks exhibit distinct failure modes, with absorbed energy increasing nonlinearly with crack surface and volume.

ROCK MECHANICS AND ROCK ENGINEERING (2021)

Article Engineering, Mechanical

Flow-coupled cohesive interface framework for simulating heterogeneous crack morphology and resolving numerical divergence in hydraulic fracture

Xin Cai et al.

Summary: This study developed a user-friendly and generic finite element framework for simulating hydraulic fracture with a complex crack network in unconventional oil and gas exploitation, with unique features such as regularizing numerical convergence problems with a fictitious viscosity approach, decoupling cohesive-cracked solid and fluid, and enforcing the Kirchhoff condition in polycrystalline geomaterials.

EXTREME MECHANICS LETTERS (2021)

Article Engineering, Mechanical

High strain rate impact effect and failure behavior of 3D six-directional braided composites

Dian-sen Li et al.

Summary: This paper investigates the high strain rate impact effect and failure behavior of three-dimensional six-directional (3D6d) braided composites. The results indicate that the composites exhibit typical strain rate sensitivity, with increased strength and modulus but decreased failure strain as the strain rate rises. Additionally, composites with larger braiding angles show higher dynamic curves and improved high strain rate properties.

EXTREME MECHANICS LETTERS (2021)

Article Energy & Fuels

Three-dimensional numerical investigation of rock plate cracking and failure under impact loading

Zhiyi Liao et al.

Summary: This study investigates the cracking and failure characteristics of rock plates under impact loading using three-dimensional FEM-based numerical modeling. The simulation results show that radial cracks initiate at the center of the rock plate and propagate to the boundaries and front surface under impact, with the number of cracks decreasing as the plate thickness increases. Circular cracks are induced at high impact velocities or small plate thicknesses, with two types of circular cracks identified and classified based on initiation time and mechanism.

GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES (2021)

Article Engineering, Geological

Dynamic strength and failure modes of sandstone under biaxial compression

K. Liu et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2020)

Article Engineering, Mechanical

Deterioration of dynamic fracture characteristics, tensile strength and elastic modulus of tight sandstone under dry-wet cycles

Peng Ying et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)

Review Energy & Fuels

Application of nanoindentation technology in rocks: a review

Zhaoyang Ma et al.

GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES (2020)

Article Energy & Fuels

Dynamic compression mechanical behavior and damage model of singly-jointed samples

Fei Wang et al.

GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES (2020)

Review Energy & Fuels

Investigation of the relationship between dynamic and static deformation moduli of rocks

Seyed Morteza Davarpanah et al.

GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES (2020)

Article Engineering, Geological

Dynamic Characterisation of Gneiss

Sunita Mishra et al.

ROCK MECHANICS AND ROCK ENGINEERING (2019)

Article Geochemistry & Geophysics

Dynamics of Microscale Precursors During Brittle Compressive Failure in Carrara Marble

Neelima Kandula et al.

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2019)

Article Engineering, Geological

Fracture Processes in Granite Blocks Under Blast Loading

Li Yuan Chi et al.

ROCK MECHANICS AND ROCK ENGINEERING (2019)

Article Engineering, Mechanical

Nano-impact indentation for high strain rate testing: The influence of rebound impacts

J. M. Wheeler et al.

EXTREME MECHANICS LETTERS (2019)

Article Geosciences, Multidisciplinary

The Decorah structure, northeastern Iowa: Geology and evidence for formation by meteorite impact

Bevan M. French et al.

GEOLOGICAL SOCIETY OF AMERICA BULLETIN (2018)

Proceedings Paper Materials Science, Multidisciplinary

Mechanical and Microstructural Aspects of Material Failure due to Localized Shear under High-Rate Loading Conditions

Mikhail Sokovikov et al.

PROCEEDINGS OF THE ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES (2018)

Review Engineering, Geological

High-Speed Photography and Digital Optical Measurement Techniques for Geomaterials: Fundamentals and Applications

H. Z. Xing et al.

ROCK MECHANICS AND ROCK ENGINEERING (2017)

Article Engineering, Geological

Size and Geometry Effects on the Mechanical Properties of Carrara Marble Under Dynamic Loadings

Chunjiang Zou et al.

ROCK MECHANICS AND ROCK ENGINEERING (2016)

Article Engineering, Geological

Strain Rate Effect on the Mechanical Behaviour of Sandstones with Different Grain Sizes

P. L. P. Wasantha et al.

ROCK MECHANICS AND ROCK ENGINEERING (2015)

Article Engineering, Geological

Experimental studies on cracking processes and failure in marble under dynamic loading

Chunjiang Zou et al.

ENGINEERING GEOLOGY (2014)

Article Engineering, Geological

Fracturing and Failure Behavior of Carrara Marble in Quasistatic and Dynamic Brazilian Disc Tests

Louis Ngai Yuen Wong et al.

ROCK MECHANICS AND ROCK ENGINEERING (2014)

Article Mechanics

Effect of loading rate on fracture toughness and failure micromechanisms in marble

Q. B. Zhang et al.

ENGINEERING FRACTURE MECHANICS (2013)

Article Multidisciplinary Sciences

Virtual melting as a new mechanism of stress relaxation under high strain rate loading

Valery I. Levitas et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2012)

Article Engineering, Civil

Numerical Evaluation of the Influence of Aggregates on Concrete Compressive Strength at High Strain Rate

Yifei Hao et al.

INTERNATIONAL JOURNAL OF PROTECTIVE STRUCTURES (2011)

Article Engineering, Geological

Simulations of explosion-induced damage to underground rock chambers

G. W. Ma et al.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2011)

Article Engineering, Geological

Systematic evaluation of cracking behavior in specimens containing single flaws under uniaxial compression

L. N. Y. Wong et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2009)

Article Engineering, Geological

Effects of microstructures on dynamic compression of Barre granite

K. Xia et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2008)

Article Geosciences, Multidisciplinary

A study on the dynamic behavior of the Meuse/Haute-Marne argillite

M. Cai et al.

PHYSICS AND CHEMISTRY OF THE EARTH (2007)

Article Geochemistry & Geophysics

A method for testing dynamic tensile strength and elastic modulus of rock materials using SHPB

QZ Wang et al.

PURE AND APPLIED GEOPHYSICS (2006)

Article Engineering, Geological

Dynamic characteristics of granite subjected to intermediate loading rate

XB Li et al.

ROCK MECHANICS AND ROCK ENGINEERING (2005)

Article Engineering, Mechanical

Influence of loading rate on shear fracture toughness for failure mode transition

JF Kalthoff et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2004)

Article Engineering, Biomedical

High strain rate testing of kidney stones

ET Sylven et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2004)

Article Engineering, Geological

Strain-rate dependency of the dynamic tensile strength of rock

SH Cho et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2003)

Article Construction & Building Technology

Testing and response of large diameter brittle materials subjected to high strain rate

TS Lok et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2002)

Article Engineering, Mechanical

Dynamic behavior of concrete at high strain rates and pressures: I. experimental characterization

DL Grote et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2001)

Article Engineering, Mechanical

An experimental method for dynamic tensile testing of concrete by spalling

JR Klepaczko et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2001)

Article Materials Science, Multidisciplinary

A split Hopkinson pressure bar technique to determine compressive stress-strain data for rock materials

DJ Frew et al.

EXPERIMENTAL MECHANICS (2001)

Article Engineering, Geological

Applicability of Mohr-Coulomb and Hoek-Brown strength criteria to the dynamic strength of brittle rock

J Zhao

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2000)

Article Geochemistry & Geophysics

Micromechanical modeling of cracking and failure in brittle rocks

JF Hazzard et al.

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2000)

Article Engineering, Geological

Experimental determination of dynamic tensile properties of a granite

J Zhao et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2000)

Article Engineering, Geological

Time-dependent tests on intact rocks in uniaxial compression

YS Li et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2000)

Article Materials Science, Multidisciplinary

Failure mode transitions in polymers under high strain rate loading

K Ravi-Chandar et al.

INTERNATIONAL JOURNAL OF FRACTURE (2000)

Article Materials Science, Multidisciplinary

Modes of dynamic shear failure in solids

JF Kalthoff

INTERNATIONAL JOURNAL OF FRACTURE (2000)