4.7 Article

Improving corrosive wear resistance of Mg-Zn-Y-Zr alloys through heat treatment

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Multidisciplinary

Effect of Ce Addition on the Tribological Behavior of ZK60 Mg-Alloy

S. M. Banijamali et al.

Summary: The addition of Ce element can significantly improve the microstructure of ZK60 alloy, reducing grain size and increasing the total fraction of precipitates, thereby enhancing the mechanical properties of the alloy. Ce element can also improve the wear resistance of the alloy, enhancing wear resistance under low load conditions and providing a protective oxide layer under high load conditions. However, under severe oxidation conditions, the microstructural evolutions caused by Ce addition do not contribute to the enhancement of wear resistance.

METALS AND MATERIALS INTERNATIONAL (2021)

Review Metallurgy & Metallurgical Engineering

Towards developing Mg alloys with simultaneously improved strength and corrosion resistance via RE alloying

Jinshu Xie et al.

Summary: Magnesium alloys have great application potential, but improvements in both strength and corrosion resistance are still needed. The addition of rare earth elements can enhance the performance of magnesium alloys, but further research is necessary to improve both strength and anti-corrosion properties.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Article Metallurgy & Metallurgical Engineering

Microstructure and corrosion resistance of a duplex structured Mg-7.5Li-3Al-1Zn

Anna Dobkowska et al.

Summary: The study found that the relative composition of Mg-7.5Li-3Al-1Zn alloy changed after extrusion and post-processing annealing, with an increase in beta(Li) content leading to improved corrosion resistance.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Article Metallurgy & Metallurgical Engineering

Effect of Ca addition on the microstructure and mechanical properties of heat-treated Mg-6.0Zn-1.2Y-0.7Zr alloy

Young-Gil Jung et al.

Summary: The addition of Ca improved the ignition resistance and refined the grains of the ZWK611 alloy, leading to enhanced mechanical properties at both room temperature and 150 degrees C. The presence of Tau- and W-phases, as well as the more uniform distribution of MgZn' precipitates in the Ca-added alloys, contributed to the improved performance of the T6-treated alloys.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Article Materials Science, Multidisciplinary

Strain-Aging-Assisted Localized Corrosion of a Mill-Scaled X-65 Pipeline Steel

Shidong Wang et al.

Summary: The study found that strain aging can exacerbate the severity of localized corrosion in pipeline steels, leading to reduced exfoliation of oxide scales during cyclic loading and corrosion exposure, increasing galvanic corrosion between the steel and oxide scales.

CORROSION (2021)

Article Materials Science, Multidisciplinary

Fabrication of low-cost Ni-P composite coating on Mg alloys with a significant improvement of corrosion resistance: Critical role of mitigating the galvanic contact between the substrate and the coating

Liangshuai Guo et al.

Summary: The high galvanic corrosion susceptibility and expensive Pd-activation process are critical obstacles for the application of electroless nickel (EN) plating on Mg alloy. In this study, a plasma electrolytic oxidation (PEO) coating was post-treated with chemical conversion to obtain an intermediate layer with high electrical resistance, aiming to reduce galvanic corrosion susceptibility. A low-cost Ag-activation technique was proposed to catalyze the EN plating process, leading to significant improvement in corrosion resistance of the EN composite coating. Additionally, the composite coating demonstrated high adhesion, hardness, electrical conductivity, and low magnetism.

CORROSION SCIENCE (2021)

Article Materials Science, Multidisciplinary

On the formation of stress corrosion crack colonies with different crack population

Shidong Wang et al.

CORROSION SCIENCE (2020)

Article Materials Science, Multidisciplinary

Influence of specific second phases on corrosion behaviors of Mg-Zn-Gd-Zr alloys

Siqi Yin et al.

CORROSION SCIENCE (2020)

Review Chemistry, Applied

Phosphate chemical conversion coatings for magnesium alloys: a review

M. A. Hafeez et al.

JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2020)

Article Nanoscience & Nanotechnology

Strengthening a dual-phase Mg-Li alloy by strain-induced phase transformation at room temperature

Fei Guo et al.

SCRIPTA MATERIALIA (2020)

Review Engineering, Mechanical

A review of recent advances in tribology

Yonggang Meng et al.

FRICTION (2020)

Review Metallurgy & Metallurgical Engineering

HA coating on Mg alloys for biomedical applications: A review

Mostafizur Rahman et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2020)

Article Materials Science, Multidisciplinary

Near-neutral pH corrosion of mill-scaled X-65 pipeline steel with paint primer

Shidong Wang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Article Electrochemistry

Corrosion Evolution of a Concrete/Casing Steel in Simulated Formation Water under Different CO2 Partial Pressures

Shuliang Wang et al.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2020)

Article Materials Science, Multidisciplinary

Development of High Corrosion- and Wear-Resistant Al-Si Alloy Coating on AZ80 Mg Alloy by Hot Extrusion

Toko Tokunaga et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)

Review Materials Science, Multidisciplinary

What activates the Mg surface-A comparison of Mg dissolution mechanisms

Jufeng Huang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Proceedings Paper Materials Science, Multidisciplinary

Mechanical properties and applications of Magnesium alloy - Review

S. Jayasathyakawin et al.

MATERIALS TODAY-PROCEEDINGS (2020)

Article Engineering, Mechanical

Effect of Compressive Deformation on Wear Property of Extruded ZK60 Magnesium Alloy

Guilin Gong et al.

TRIBOLOGY TRANSACTIONS (2019)

Article Engineering, Mechanical

Influence of solution treatment on the corrosion fatigue behavior of an as forged Mg-Zn-Y-Zr alloy

B. J. Wang et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

Article Materials Science, Coatings & Films

Development of corrosion and wear resistant micro-arc oxidation coating on a magnesium alloy

Faiz Muhaffel et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Article Materials Science, Multidisciplinary

Influence of reinforcements in friction stir processed magnesium alloys: insight in medical applications

Adedotun Adetunla et al.

MATERIALS RESEARCH EXPRESS (2019)

Article Metallurgy & Metallurgical Engineering

The corrosion behavior of AZ31 alloy in chloride and sulfate media - A comparative study through electrochemical investigations

M. Gururaj Acharya et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2019)

Article Materials Science, Multidisciplinary

What is going on in magnesium alloys?

X. J. Wang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)

Article Materials Science, Ceramics

Tribological and corrosion behaviors of Mg56.5Cu27Ag5Dy11.5 bulk metallic glass in NaCl solution

Nengbin Hua et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2017)

Article Electrochemistry

Characterization of Filiform Corrosion of Mg-3Zn Mg Alloy

Hongxin Wang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Article Nanoscience & Nanotechnology

Effect of solution treatment temperature and cooling rate on the mechanical properties of tungsten heavy alloy

Anjali Kumari et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Article Metallurgy & Metallurgical Engineering

Friction and wear behaviors of biodegradable Mg-6Gd-0.5Zn-0.4Zr alloy under simulated body fluid condition

Jianwei Dai et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2017)

Review Materials Science, Multidisciplinary

A Critical Review of Mg-Zn-Y Series Alloys Containing I, W, and LPSO Phases

Nabila Tahreen et al.

ADVANCED ENGINEERING MATERIALS (2016)

Article Multidisciplinary Sciences

Effect of solution treatment on stress corrosion cracking behavior of an as-forged Mg-Zn-Y-Zr alloy

S. D. Wang et al.

SCIENTIFIC REPORTS (2016)

Article Materials Science, Multidisciplinary

Effect of heat treatment on the corrosion resistance and mechanical properties of an as-forged Mg-Zn-Y-Zr alloy

S. D. Wang et al.

CORROSION SCIENCE (2015)

Article Electrochemistry

Enhanced hydrogen evolution on Mg (OH)2 covered Mg surfaces

S. H. Salleh et al.

ELECTROCHIMICA ACTA (2015)

Article Chemistry, Physical

Effect of immersion time on the electrochemical behaviour of AZ31B alloy

A. Fattah-alhosseini et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Article Electrochemistry

Film Breakdown and Nano-Porous Mg(OH)2 Formation from Corrosion of Magnesium Alloys in Salt Solutions

M. P. Brady et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Article Materials Science, Multidisciplinary

Effect of corrosion attack on the fatigue behavior of an as-cast Mg-7%Gd-5%Y-1%Nd-0.5%Zr alloy

S. D. Wang et al.

MATERIALS & DESIGN (2015)

Article Materials Science, Multidisciplinary

Quasicrystal dissolution and performance of isothermally heat-treated Mg-Zn-Y alloy

Di-Qing Wan et al.

RARE METALS (2015)

Article Materials Science, Multidisciplinary

Wear and Friction Properties of Mg-Zn-Y Alloy with Dispersion of Quasi-Crystalline Phase

Hidetoshi Somekawa et al.

MATERIALS TRANSACTIONS (2014)

Review Materials Science, Multidisciplinary

Anomalous transport phenomena in Weyl metal beyond the Drude model for Landau's Fermi liquids

Ki-Seok Kim et al.

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2014)

Article Engineering, Mechanical

Dry Sliding Wear Behavior of Mg-Zn-Gd Alloy before and after Cryogenic Treatment

Yong Liu et al.

TRIBOLOGY TRANSACTIONS (2014)

Article Metallurgy & Metallurgical Engineering

Stress corrosion cracking susceptibility of a high strength Mg-7% Gd-5% Y-1% Nd-0.5% Zr alloy

S. D. Wang et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2014)

Article Engineering, Mechanical

Corrosive wear resistance of Mg-Al-Zn alloys with alloyed yttrium

Xiaoguang Sun et al.

Review Metallurgy & Metallurgical Engineering

Advances in Mg corrosion and research suggestions

Andrej Atrens et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2013)

Article Materials Science, Multidisciplinary

The role of second phases in the corrosion behavior of Mg-5Zn alloy

Yingwei Song et al.

CORROSION SCIENCE (2012)

Article Materials Science, Multidisciplinary

The effect of Zn concentration on the corrosion behavior of Mg-xZn alloys

Yingwei Song et al.

CORROSION SCIENCE (2012)

Review Materials Science, Multidisciplinary

Effects of icosahedral phase formation on the microstructure and mechanical improvement of Mg alloys: A review

D. K. Xu et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2012)

Review Chemistry, Applied

Recent progress in corrosion protection of magnesium alloys by organic coatings

Rong-Gang Hu et al.

PROGRESS IN ORGANIC COATINGS (2012)

Article Materials Science, Multidisciplinary

Formation and evolution of the hardening precipitates in a Mg-Y-Nd alloy

G. Barucca et al.

ACTA MATERIALIA (2011)

Article Materials Science, Multidisciplinary

Microstructure and Dry Sliding Wear Behavior of Mg-Y-Zn Alloy Modified by Laser Surface Melting

X. X. Lv et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2011)

Article Materials Science, Multidisciplinary

Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation

Zhiming Shi et al.

CORROSION SCIENCE (2010)

Article Electrochemistry

Corrosion behavior of Mg, AZ31, and AZ91 alloys in dilute NaCl solutions

Lei Wang et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2010)

Article Metallurgy & Metallurgical Engineering

Corrosion behavior of as-cast Mg68Zn28Y4 alloy with I-phase

Shi Fei et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2009)

Article Nanoscience & Nanotechnology

Friction and wear behavior of as-cast Mg-Zn-Y quasicrystal materials

Yingbo Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Article Engineering, Mechanical

Dry sliding wear behavior of magnesium alloys

J. An et al.

Article Metallurgy & Metallurgical Engineering

Corrosion and oxidation of alloys of the Mg-Y-Zr-REM system

A. Kaya et al.

METAL SCIENCE AND HEAT TREATMENT (2006)

Article Materials Science, Multidisciplinary

Validation of corrosion rates measured by the Tafel extrapolation method

E McCafferty

CORROSION SCIENCE (2005)

Article Chemistry, Physical

Variations of work function and corrosion behaviors of deformed copper surfaces

W Li et al.

APPLIED SURFACE SCIENCE (2005)

Article Materials Science, Multidisciplinary

Deformation behavior of Mg-Zn-Y alloys reinforced by icosahedral quasicrystalline particles

DH Bae et al.

ACTA MATERIALIA (2002)

Article Materials Science, Multidisciplinary

High strength Mg-Zn-Y alloy containing quasicrystalline particles

DH Bae et al.

MATERIALS TRANSACTIONS (2001)