相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Selective laser melting of Ti6Al4V alloy: Process parameters, defects and post-treatments
Anil Kumar Singla et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Diffusion of oxygen and nitrogen into titanium under laser irradiation in air
Congyuan Zeng et al.
APPLIED SURFACE SCIENCE (2020)
Mechanism of stress relaxation and phase transformation in additively manufactured Ti-6Al-4V via in situ high temperature XRD and TEM analyses
F. R. Kaschel et al.
ACTA MATERIALIA (2020)
Microstructural tailoring of As-Selective Laser Melted Ti6Al4V alloy for high mechanical properties
Yangli Xu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Influence of the pore size and porosity of selective laser melted Ti6Al4V ELI porous scaffold on cell proliferation, osteogenesis and bone ingrowth
Ziyu Chen et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Strength-ductility improvement of extruded Ti-(N) materials using pure Ti powder with high nitrogen solution
Ammarueda Issariyapat et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effect of heat treatment on the tensile behavior of selective laser melted Ti-6Al-4V by in situ X-ray characterization
Dingchang Zhang et al.
ACTA MATERIALIA (2020)
Microstructural evolution and stress state related to mechanical properties of electron beam melted Ti-6Al-4V alloy modified by laser shock peening
Liang Lan et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Selective laser-melted titanium materials with nitrogen solid solutions for balanced strength and ductility
Katsuyoshi Kondoh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Study of pore defect and mechanical properties in selective laser melted Ti6Al4V alloy based on X-ray computed tomography
Wei Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
In-situ preparation and formation of TiB/Ti-6Al-4V nanocomposite via laser additive manufacturing: Microstructure evolution and tribological behavior
Chao Cai et al.
POWDER TECHNOLOGY (2019)
Quantitative Analysis on Light Elements Solution Strengthening in Pure Titanium Sintered Materials by Labusch Model Using Experimental Data
Shota Kariya et al.
MATERIALS TRANSACTIONS (2019)
Additive manufacturing of Ti6Al4V alloy: A review
Shunyu Liu et al.
MATERIALS & DESIGN (2019)
The role of lattice defects, element partitioning and intrinsic heat effects on the microstructure in selective laser melted Ti-6Al-4V
Jan Haubrich et al.
ACTA MATERIALIA (2019)
Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance
Dongdong Gu et al.
COMPOSITES PART B-ENGINEERING (2019)
Ductilization of selective laser melted Ti6Al4V alloy by friction stir processing
Chunjie Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Fatigue strength improvement of selective laser melted Ti6Al4V using ultrasonic surface mechanical attrition
Xingchen Yan et al.
MATERIALS RESEARCH LETTERS (2019)
Selective laser melting under the reactive atmosphere: A convenient and efficient approach to fabricate ultrahigh strength commercially pure titanium without sacrificing ductility
D. W. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Achieving Ti6Al4V alloys with both high strength and ductility via selective laser melting
Jiangwei Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Titanium and nitrogen interactions under laser additive manufacturing conditions
Congyuan Zeng et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Influence of trace boron addition on microstructure, tensile properties and their anisotropy of Ti6Al4V fabricated by laser directed energy deposition
Aitang Xue et al.
MATERIALS & DESIGN (2019)
Controlling martensitic decomposition during selective laser melting to achieve best ductility in high strength Ti-6Al-4V
A. Zafari et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of heat treatment on the phase transformation and mechanical properties of Ti6Al4V fabricated by selective laser melting
Xingchen Yan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Microstructure and tensile properties of TiCp/Ti6Al4V titanium matrix composites manufactured by laser melting deposition
Jiandong Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Effect of laser power on oxygen and nitrogen concentration of commercially pure titanium manufactured by selective laser melting
Tae-Wook Na et al.
MATERIALS CHARACTERIZATION (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Examination of the twinning activity in additively manufactured Ti-6Al-4V
H. Z. Zhong et al.
MATERIALS & DESIGN (2018)
Experimental investigations on natural fiber embedded additive manufacturing-based biodegradable structures for biomedical applications
Amarveer Singh Mangat et al.
RAPID PROTOTYPING JOURNAL (2018)
Laser deposition-additive manufacturing of in situ TiB reinforced titanium matrix composites: TiB growth and part performance
Yingbin Hu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Effects of Oxygen Content on Tensile and Fatigue Performance of Ti-6Al-4 V Manufactured by Selective Laser Melting
Oscar A. Quintana et al.
JOM (2017)
Oxygen and nitrogen concentrations in the Ti-6Al-4V alloy manufactured by direct metal laser sintering (DMLS) process
N. Kazantseva et al.
MATERIALS LETTERS (2017)
In-situ residual stress reduction, martensitic decomposition and mechanical properties enhancement through high temperature powder bed pre-heating of Selective Laser Melted Ti6Al4V
Haider Ali et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Achieving grain refinement and enhanced mechanical properties in Ti-6Al-4V alloy produced by multidirectional isothermal forging
Z. X. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructure and mechanical properties of functionally graded TiCp/Ti6A14V composite fabricated by laser melting deposition
Liqun Li et al.
CERAMICS INTERNATIONAL (2017)
Selective laser melting of nano-TiB2 decorated AlSi10Mg alloy with high fracture strength and ductility
X. P. Li et al.
ACTA MATERIALIA (2017)
Inducing Stable α plus β Microstructures during Selective Laser Melting of Ti-6Al-4V Using Intensified Intrinsic Heat Treatments
Pere Barriobero-Vila et al.
MATERIALS (2017)
Effect of processing parameters on microstructure during laser-sustained plasma (LSP) nitriding of commercially-pure titanium
Amar M. Kamat et al.
ACTA MATERIALIA (2016)
Six decades of the Hall-Petch effect - a survey of grain-size strengthening studies on pure metals
Z. C. Cordero et al.
INTERNATIONAL MATERIALS REVIEWS (2016)
Microstructural evolution and microhardness of a selective-laser-melted Ti-6Al-4V alloy after post heat treatments
S. Q. Wu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting
Jingjing Yang et al.
MATERIALS & DESIGN (2016)
Revealing martensitic transformation and α/β interface evolution in electron beam melting three-dimensional-printed Ti-6Al-4V
Xipeng Tan et al.
SCIENTIFIC REPORTS (2016)
Additive manufacturing of strong and ductile Ti-6Al-4V by selective laser melting via in situ martensite decomposition
W. Xu et al.
ACTA MATERIALIA (2015)
Rapid in situ fabrication of Fe/SiC bulk nanocomposites by selective laser melting directly from a mixed powder of microsized Fe and SiC
Bo Song et al.
SCRIPTA MATERIALIA (2014)
Laser additive manufacturing of metallic components: materials, processes and mechanisms
D. D. Gu et al.
INTERNATIONAL MATERIALS REVIEWS (2012)
Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
Bey Vrancken et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Investigations of laser-sustained plasma and its role in laser nitriding of titanium
A. R. Nassar et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2012)
As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting
T. Vilaro et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
A study of the micro structural evolution during selective laser melting of Ti-6Al-4V
Lore Thijs et al.
ACTA MATERIALIA (2010)
Lattice expansion of Ti-6Al-4V by nitrogen and oxygen absorption
R. Montanari et al.
MATERIALS CHARACTERIZATION (2008)
Microstructure, hardness and cavitation erosion behaviour of Ti-6Al-4V laser nitrided under different gas atmospheres
J. Kaspar et al.
SURFACE ENGINEERING (2007)