☆ 4.8 Article

Fabrication of high-performance silica-based ceramic cores through selective laser sintering combined with vacuum infiltration

ADDITIVE MANUFACTURING (2021)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Ceramics

Selective laser sintering of porous Al2O3-based ceramics using both Al2O3 and SiO2 poly-hollow microspheres as raw materials

Jia-Min Wu et al.

Summary: The study found that a moderate content of SiO2 PHMs could enhance the compressive strength and reduce the porosity of Al2O3-based ceramics, while increasing the open pore size. However, an increase in the content of SiO2 PHMs to 40 wt% led to an increase in porosity and a decrease in pore size of the material. The selective laser sintering of different types of ceramic PHMs is a feasible method for producing porous ceramics with complex shapes, controllable pore sizes, and improved properties.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Improved mechanical properties of silica ceramic cores prepared by 3D printing and sintering processes

He Li et al.

Summary: This study fabricated silica ceramic cores with improved mechanical properties using stereolithography based-3D printing. By controlling the printing direction and sintering temperature, the flexural strength was optimized, emphasizing the importance of controlling 3D printing parameters and sintering process.

SCRIPTA MATERIALIA (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Accurate and Computational: A review of color reproduction in Full-color 3D printing

Jiangping Yuan et al.

Summary: This review article discusses the color reproduction of 3D objects, emphasizing the methods and challenges of color reproduction, and presents the core issues and future prospects of color reproduction in full-color 3D printing.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Materials Science, Ceramics

Effects of micro-sized mullite on cristobalite crystallization and properties of silica-based ceramic cores

Wenlong Zheng et al.

Summary: By adding micro-sized mullite, the high temperature properties of silica-based ceramic cores can be optimized, reducing the crystallization of cristobalite, enhancing flexural strength, and altering the fracture mechanism. However, when the mullite content exceeds 4.6%, the mechanical and thermal properties of ceramic cores are slightly reduced.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Recycling photovoltaic silicon waste for fabricating porous mullite ceramics by low-temperature reaction sintering

Ruipeng Liu et al.

Summary: By studying the effects of additive content and sintering temperature on the mullitization reaction of mullite ceramics, it was found that ammonium molybdate tetrahydrate molybdenum can reduce the reaction temperature and potentially be used in the preparation of porous mullite ceramics. The research provides a new idea for the low-cost preparation of porous mullite ceramics with high purity using photovoltaic silicon waste.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Engineering, Manufacturing

A numerical study on the packing quality of fibre/polymer composite powder for powder bed fusion additive manufacturing

Pengfei Tan et al.

Summary: A discrete element model was developed to simulate the packing process of fibre/polymer composite powder, analyzing the effects of powder layer thickness, roller spreading velocity, and fibre quantity on packing quality. The model suggested that increasing powder layer thickness improves packing density, while high spreading velocity and excessive fibres degrade packing quality.

VIRTUAL AND PHYSICAL PROTOTYPING (2021)

添加到收藏夹

Article Materials Science, Ceramics

Creep mechanism of zircon-added silica ceramic cores formed by stereolithography

Guang Zhao et al.

Summary: This study investigates the creep behavior of 3D-printed ceramic cores, specifically focusing on the influence of ZrSiO4 addition on their creep mechanism and analyzing delamination phenomenon through SEM observations. The addition of ZrSiO4 was found to hinder viscous flow of fused silica, deteriorating delamination and increasing creep, but also promote interlayer densification, strengthening creep resistance.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Ceramics

Microstructure and properties evolution of silicon-based ceramic cores fabricated by 3D printing with stair-stepping effect control

Xingang Wang et al.

Summary: The study investigated the influence of nano-silica content on the microstructure and properties of silicon-based ceramic cores for hollow turbine blades. Results showed that increasing nano-silica content led to decreased surface roughness, increased flexural strength, and improved creep-resistance of the ceramic cores, contributing to the high quality of cast superalloy blades.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Review Engineering, Manufacturing

Perspectives of using machine learning in laser powder bed fusion for metal additive manufacturing

S. L. Sing et al.

Summary: The adoption of laser powder bed fusion (L-PBF) for metals by the industry has been limited due to inconsistency in parts. Machine learning (ML) has the potential to overcome this obstacle by utilizing datasets obtained at various stages of the process chain, leading to better quality control.

VIRTUAL AND PHYSICAL PROTOTYPING (2021)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication of Al2O3-SiO2 ceramics through combined selective laser sintering and SiO2-sol infiltration

Chen-Hui Li et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Preparation of high-porosity Al2O3 ceramic foams via selective laser sintering of Al2O3 poly-hollow microspheres

Shan-Shan Liu et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Ceramics

Enhanced thermal properties of silica-based ceramic cores prepared by coating alumina/mullite on the surface of fused silica powders

Xiao Chen et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Ceramics

Influence of yttrium oxide addition and sintering temperature on properties of alumina-based ceramic cores

Zhijia Zhao et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Manufacturing

Fabrication of a ceramic core for an impeller blade using a 3D printing technique and inorganic binder

Eun-Hee Kim et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Materials Science, Ceramics

Porous Al2O3 ceramics with spontaneously formed pores and enhanced strength prepared by indirect selective laser sintering combined with reaction bonding

Ye Dong et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Chemistry, Physical

High-Temperature Mechanical Behaviors of SiO2-Based Ceramic Core for Directional Solidification of Turbine Blades

Jiangwei Zhong et al.

MATERIALS (2020)

添加到收藏夹

Article Engineering, Manufacturing

Leaching improvement of ceramic cores for hollow turbine blades based on additive manufacturing

Wei-Jun Zhu et al.

ADVANCES IN MANUFACTURING (2019)

添加到收藏夹

Article Chemistry, Physical

TEM analysis and mechanical strengthening mechanism of MnO2 sintering aid in selective laser sintered porous mullites

An-Nan Chen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Engineering, Manufacturing

Electrical and thermal conductivities of MWCNT/polymer composites fabricated by selective laser sintering

Shangqin Yuan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

添加到收藏夹

Article Engineering, Manufacturing

Design and development of a customised knee positioning orthosis using low cost 3D printers

Sara Santos et al.

VIRTUAL AND PHYSICAL PROTOTYPING (2017)

添加到收藏夹

Article Materials Science, Ceramics

Shrinkage and flexural strength improvement of silica-based composites for ceramic cores by colloidal alumina infiltration

Young-Hwan Kim et al.

CERAMICS INTERNATIONAL (2016)

添加到收藏夹

Article Materials Science, Ceramics

Effect of Cristobalite on the Strength of Sintered Fused Silica Above and Below the Cristobalite Transformation

Ryan C. Breneman et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)

添加到收藏夹

Article Materials Science, Ceramics

Effect of zircon content on chemical and mechanical behavior of silica-based ceramic cores

A. Kazemi et al.

CERAMICS INTERNATIONAL (2014)

添加到收藏夹

Article Materials Science, Ceramics

Thermal Reaction of Cristobalite in Nano-SiO2/α-Al2O3 Powder Systems for Mullite Synthesis

Pei-Ching Yu et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)

添加到收藏夹

Article Chemistry, Physical

Preparation and characterization of CaO-Al2O3-SiO2 glass/fused silica composites for LTCC application

Guobin Xia et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Reaction-sintered mullite-zirconia composites by colloidal processing of alumina-zircon-CeO2 mixtures

LB Garrido et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dimensional changes and creep of silica core ceramics used in investment casting of superalloys

AA Wereszczak et al.

JOURNAL OF MATERIALS SCIENCE (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.