相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Intermetallic-Rich Layer Formation for Improving Corrosion Resistance of Magnesium Alloys
D. Calderon et al.
METALS AND MATERIALS INTERNATIONAL (2022)
On the corrosion, stress corrosion and cytocompatibility performances of ALD TiO2 and ZrO2 coated magnesium alloys
M. Peron et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2022)
Effect of Grain Refinement by Laser Surface Treatment on Cell Adhesion Behavior of AZ91D Magnesium Alloy
Changgang Guo et al.
JOURNAL OF TESTING AND EVALUATION (2021)
Healthcare utilization and related cost of midshaft clavicle fracture treatment in Belgium
Michiel Herteleer et al.
EUROPEAN JOURNAL OF TRAUMA AND EMERGENCY SURGERY (2021)
In vitrodegradation and mechanical behaviour of calcium phosphate coated Mg-Ca alloy
Shebeer A. Rahim et al.
MATERIALS TECHNOLOGY (2021)
Electrochemical characterization of electrophoretically deposited hydroxyapatite/chitosan/graphene oxide composite coating on Mg substrate
Ahmad Saadati et al.
SURFACES AND INTERFACES (2021)
Magnesium alloys for biomedical application: Advanced corrosion control through surface coating
Robert B. Heimann
SURFACE & COATINGS TECHNOLOGY (2021)
Investigating TiO2-HA-PCL hybrid coating as an efficient corrosion resistant barrier of ZM21 Mg alloy
Navdeep Singh et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2021)
Poly caprolactone/titanium dioxide nanofiber coating on AM50 alloy for biomedical application
Mani Karthega et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2021)
Ternary hydroxyapatite/chitosan/graphene oxide composite coating on AZ91D magnesium alloy by electrophoretic deposition
R. Askarnia et al.
CERAMICS INTERNATIONAL (2021)
Fabrication of superhydrophobic composite coating of hydroxyapatite/stearic acid on magnesium alloy and its corrosion resistance, antibacterial adhesion
Qianqian Li et al.
JOURNAL OF MATERIALS SCIENCE (2021)
Evolution of gradient structured layer on AZ91D magnesium alloy and its corrosion behaviour
Digvijay Singh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Functional Gradient Metallic Biomaterials: Techniques, Current Scenery, and Future Prospects in the Biomedical Field
Hongyuan Shi et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2021)
Microstructure and surface texture driven improvement in in-vitro response of laser surface processed AZ31B magnesium alloy
Tso-Chang Wu et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2021)
Tuning of the Mg Alloy AZ31 Anodizing Process for Biodegradable Implants
Andrea Zaffora et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
Micro-arc oxidation-assisted sol-gel preparation of calcium metaphosphate coatings on magnesium alloys for bone repair
Yanping Liu et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)
Role of Surface Preparation in Corrosion Resistance Due to Silane Coatings on a Magnesium Alloy
Abhishek Saxena et al.
MOLECULES (2021)
Plasma-Sprayed Hydroxyapatite-Strontium Coating for Improved Corrosion Resistance and Surface Properties of Biodegradable AZ31 Mg Alloy for Biomedical Applications
Puneet Bansal et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)
Bilayer micro-arc oxidation-poly (glycerol sebacate) coating on AZ91 for improved corrosion resistance and biological activity
Mohsen Ghafarzadeh et al.
PROGRESS IN ORGANIC COATINGS (2021)
被撤回的出版物: An experimental study on stress-shielding effects of locked compression plates in fixing intact dog femur (Retracted article. See vol. 17, 2022)
Xinwen Zhao et al.
JOURNAL OF ORTHOPAEDIC SURGERY AND RESEARCH (2021)
Does acid pickling of Mg-Ca alloy enhance biomineralization?
Shebeer A. Rahim et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2021)
Recent Developments and Novel Applications of Laser Shock Peening: A Review
Chaoyi Zhang et al.
ADVANCED ENGINEERING MATERIALS (2021)
Biomimicking Bone-Implant Interface Facilitates the Bioadaption of a New Degradable Magnesium Alloy to the Bone Tissue Microenvironment
Wenting Li et al.
ADVANCED SCIENCE (2021)
Polycaprolactone tridentate ligand corrosion inhibitors coated on biodegradable Mg implant
Hamouda M. Mousa et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2021)
Improving the in vitro Degradation, Mechanical and Biological Properties of AZ91-3Ca Mg Alloy via Hydrothermal Calcium Phosphate Coatings
Asif Ali et al.
FRONTIERS IN MATERIALS (2021)
Preliminary Studies for One-Step Fabrication of Metallic Iron-Based Coatings on Magnesium as Temporary Protection in Biodegradable Medical Application
Yuyun Yang et al.
FRONTIERS IN MATERIALS (2021)
The Role of Biodegradable Magnesium and Its Alloys in Anterior Cruciate Ligament Reconstruction: A Systematic Review and Meta-Analysis Based on Animal Studies
Zhizhong Shang et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2021)
Clinical translation and challenges of biodegradable magnesium-based interference screws in ACL reconstruction
Ying Luo et al.
BIOACTIVE MATERIALS (2021)
Bed of nails: bioinspired nano-texturing towards antibacterial and bioactivity functions
D. Chopra et al.
MATERIALS TODAY ADVANCES (2021)
A composite coating with physical interlocking and chemical bonding on WE43 magnesium alloy for corrosion protection and cytocompatibility enhancement
Haili Zhou et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Additively Manufactured Absorbable Porous Metal Implants - Processing, Alloying and Corrosion Behavior
Holger Jahr et al.
FRONTIERS IN MATERIALS (2021)
Preparation and characterization of chitosan/graphene oxide nanocomposite coatings on Mg-2 wt% Zn scaffold by pulse electrodeposition process
Mohammad Ranjbar Hamghavandi et al.
BIOMEDICAL MATERIALS (2021)
Copper coating formed by micro-arc oxidation on pure Mg improved antibacterial activity, osteogenesis, and angiogenesis in vivo and in vitro
Dong-yu Liang et al.
BIOMEDICAL MICRODEVICES (2021)
Sacrificial protection of Mg-based resorbable implant alloy by magnetron sputtered Mg5Gd alloy coating: A short-term study
K. A. Yasakau et al.
CORROSION SCIENCE (2021)
Design approaches and challenges for biodegradable bone implants: a review
Girish Chandra et al.
EXPERT REVIEW OF MEDICAL DEVICES (2021)
Corrosion Resistance of MgZn Alloy Covered by Chitosan-Based Coatings
Iryna Kozina et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2021)
Sol-gel coatings doped with graphene nanoplatelets for improving the degradation rate and the cytocompatibility of AZ31 alloy for biomedical applications
J. P. Fernandez-Hernan et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Microstructure and improved anti-corrosion properties of cold-sprayed Zn coatings fabricated by post shot-peening process
Hai-Long Yao et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Electrophoretically deposited high molecular weight chitosan/bioactive glass composite coatings on WE43 magnesium alloy
Agnieszka Witecka et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Surface properties modification of magnesium alloys by low energy high current pulsed electron beam
Federico Morini et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Effects of strontium-substitution in sputter deposited calcium phosphate coatings on the rate of corrosion of magnesium alloys
Jonathan G. Acheson et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Point-of-care antimicrobial coating protects orthopaedic implants from bacterial challenge
Weixian Xi et al.
NATURE COMMUNICATIONS (2021)
Diamond in the Rough: Toward Improved Materials for the Bone-Implant Interface
Jessica S. L. Fong et al.
ADVANCED HEALTHCARE MATERIALS (2021)
Recent Advances in Research on Antibacterial Metals and Alloys as Implant Materials
Juyang Jiao et al.
FRONTIERS IN CELLULAR AND INFECTION MICROBIOLOGY (2021)
A Comprehensive Review on Surface Modifications of Biodegradable Magnesium-Based Implant Alloy: Polymer Coatings Opportunities and Challenges
Abbas Saberi et al.
COATINGS (2021)
Magnesium Promotes the Regeneration of the Peripheral Nerve
Jingxin Zhang et al.
FRONTIERS IN CELL AND DEVELOPMENTAL BIOLOGY (2021)
Pure Mg-Al Layered Double Hydroxide Film on Magnesium Alloys for Orthopedic Applications
Shi Cheng et al.
ACS OMEGA (2021)
Effect of ZnO nanoparticles addition to PEO coatings on AZ31B Mg alloy: antibacterial effect and corrosion behavior of coatings in Ringer's physiological solution
Mahya Seyfi et al.
JOURNAL OF ASIAN CERAMIC SOCIETIES (2021)
Nano-hydroxyapatite/ZnO coating prepared on a biodegradable Mg-Zn-Ca bulk metallic glass by one-step hydrothermal method in acid situation
Jie Zhou et al.
CERAMICS INTERNATIONAL (2020)
Formation of a protective layer against corrosion on Mg alloy via alkali pretreatment followed by vanillic acid treatment
Sheng Li et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2020)
Co-incorporation of graphene oxide/silver nanoparticle into poly-L-lactic acid fibrous: A route toward the development of cytocompatible and antibacterial coating layer on magnesium implants
Hamid Reza Bakhsheshi-Rad et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Fabrication, characterisation and corrosion of HA coated AZ31B Mg implant material: Effect of electrodeposition current density
Mohammad Uddin et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Surface modification of biodegradable AZ91 magnesium alloy by electrospun polymer nanocomposite: Evaluation of in vitro degradation and cytocompatibility
Z. Panahi et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Design of biodegradable, implantable devices towards clinical translation
Chunmei Li et al.
NATURE REVIEWS MATERIALS (2020)
Corrosion Resistance and Biocompatibility Assessment of a Biodegradable Hydrothermal-Coated Mg-Zn-Ca Alloy: An in Vitro and in Vivo Study
Zheng Xi et al.
ACS OMEGA (2020)
Biodegradable Magnesium-Based Implants in Orthopedics-A General Review and Perspectives
Jia-Li Wang et al.
ADVANCED SCIENCE (2020)
Failure after proximal humeral fracture osteosynthesis: a one year analysis of hospital-related healthcare cost
Jan Dauwe et al.
INTERNATIONAL ORTHOPAEDICS (2020)
PLA deposition on surface treated magnesium alloy: Adhesion, toughness and corrosion behaviour
M. Munoz et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Structure and corrosion behavior of TiO2 thin films deposited onto Mg-based alloy using magnetron sputtering and sol-gel
Aneta Kania et al.
THIN SOLID FILMS (2020)
Hybrid Sol-gel Coatings for Corrosion Mitigation: A Critical Review
Rita B. Figueira
POLYMERS (2020)
Microstructure, mechanical properties, and degradation of Mg-Ag alloy after equal-channel angular pressing
Krzysztof Bryla et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Fabrication and characterization of silk fibroin coating on APTES pretreated Mg-Zn-Ca alloy
Chenxi Wang et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Tailoring biomineralization and biodegradation of Mg-Ca alloy by acetic acid pickling
Shebeer A. Rahim et al.
MATERIALS RESEARCH EXPRESS (2020)
Microstructure and corrosion resistance of a Mg2Sn-dispersed Mg alloy subjected to pulsed electron beam treatment
Daseul Lee et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2020)
Preparation and Degradation Behavior of Composite Bio-Coating on ZK60 Magnesium Alloy Using Combined Micro-Arc Oxidation and Electrophoresis Deposition
Ze-Xin Wang et al.
FRONTIERS IN MATERIALS (2020)
Magnesium Alloys With Tunable Interfaces as Bone Implant Materials
Mostafizur Rahman et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)
Biodegradation behavior of micro-arc oxidation coating on magnesium alloy-from a protein perspective
Zhao-Qi Zhang et al.
BIOACTIVE MATERIALS (2020)
Effect of warm shot peening treatments on surface properties and corrosion behavior of AZ31 magnesium alloy
L. B. Peral et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Stress Corrosion Resistance of Laser Shock Peening/Microarc Oxidation Reconstruction Layer Fabricated on AZ80 Magnesium Alloy in Simulated Body Fluid
Ying Xiong et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)
Original nanomedjournal.com Bilayer nanostructure coated AZ31 magnesium alloy implants: in vivo reconstruction of critical-sized rabbit femoral segmental bone defect
Govindaraj Perumal et al.
NANOMEDICINE-NANOTECHNOLOGY BIOLOGY AND MEDICINE (2020)
Electrophoretic deposition of chitosan-bioactive glass nanocomposite coatings on AZ91 Mg alloy for biomedical applications
Masoumeh Alaei et al.
PROGRESS IN ORGANIC COATINGS (2020)
58S and 68S sol-gel glass-like bioactive coatings for enhancing the implant performance of AZ91D magnesium alloy
S. A. Omar et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Gradient Microstructure Induced by Surface Mechanical Attrition Treatment (SMAT) in Magnesium Studied Using Positron Annihilation Spectroscopy and Complementary Methods
Konrad Skowron et al.
MATERIALS (2020)
Properties of Titanium Oxide Coating on MgZn Alloy by Magnetron Sputtering for Stent Application
Shusen Hou et al.
COATINGS (2020)
Properties of Micro-Arc Oxidation Coating Fabricated on Magnesium Under Two Steps Current-Decreasing Mode
Ze-Xin Wang et al.
FRONTIERS IN MATERIALS (2020)
Fabrication of superhydrophobic coatings for corrosion protection by electrodeposition: A comprehensive review
Jianguo Liu et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)
Enhanced corrosion resistance and surface bioactivity of AZ31B Mg alloy by high pressure cold sprayed monolayer Ti and bilayer Ta/Ti coatings in simulated body fluid
M. Daroonparvar et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
Formation of nanostructures on magnesium alloy by anodization for potential biomedical applications
L. Mohan et al.
MATERIALS TODAY COMMUNICATIONS (2020)
Bone and Cartilage Interfaces With Orthopedic Implants: A Literature Review
Remigiusz M. Grzeskowiak et al.
FRONTIERS IN SURGERY (2020)
Surface chemistry, film morphology, local electrochemical behavior and cytotoxic response of anodized AZ31B magnesium alloy
Leandro Antonio de Oliveira et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Osteochondral Injury, Management and Tissue Engineering Approaches
George Jacob et al.
FRONTIERS IN CELL AND DEVELOPMENTAL BIOLOGY (2020)
Investigation of surface properties and corrosion behavior of plasma sprayed HA/ZnO coatings prepared on AZ31 Mg alloy
Puneet Bansal et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Enhanced corrosion resistance and biocompatibility of biodegradable magnesium alloy modified by calcium phosphate/collagen coating
Yunting Guo et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Improving stress corrosion cracking behavior of AZ31 alloy with conformal thin titania and zirconia coatings for biomedical applications
M. Peron et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
Comparative study on microstructure and corrosion behavior of nanostructured hydroxyapatite coatings deposited by high velocity oxygen fuel and flame spraying on AZ61 magnesium based substrates
M. Mardali et al.
APPLIED SURFACE SCIENCE (2019)
Composite PCL/HA/simvastatin electrospun nanofiber coating on biodegradable Mg alloy for orthopedic implant application
Abdelrahman I. Rezk et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2019)
Controlling corrosion kinetics of magnesium alloys by electrochemical anodization and investigation of film mechanical properties
Zia Ur Rahman et al.
APPLIED SURFACE SCIENCE (2019)
Antibacterial activity and corrosion resistance of Ta2O5 thin film and electrospun PCL/MgO-Ag nanofiber coatings on biodegradable Mg alloy implants
Hamid Reza Bakhsheshi-Rad et al.
CERAMICS INTERNATIONAL (2019)
Enhanced mechanical properties and biocompatibility of Mg-Gd-Ca alloy by laser surface processing
Jiaru Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Acetic Acid Etching of Mg-xGd Alloys
Marcjanna Maria Gawlik et al.
METALS (2019)
Hydrothermal Synthesis of Protective Coating on Mg Alloy for Degradable Implant Applications
Jinshu Xie et al.
COATINGS (2019)
Additive manufacturing of biodegradable metals: Current research status and future perspectives
Yu Qin et al.
ACTA BIOMATERIALIA (2019)
Influence of duty cycle on properties of the superhydrophobic coating on an anodized magnesium alloy fabricated by pulse electrodeposition
Yufen Zhang et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2019)
One-pot hydrothermal synthesis, in vitro biodegradation and biocompatibility of Sr-doped nanorod/nanowire hydroxyapatite coatings on ZK60 magnesium alloy
Taolei Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
In Vitro Osteocompatibility and Enhanced Biocorrosion Resistance of Diammonium Hydrogen Phosphate-Pretreated/Poly(ether imide) Coatings on Magnesium for Orthopedic Application
Yuyun Yang et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Laser surface melting of Mg-Zn-Dy alloy for better wettability and corrosion resistance for biodegradable implant applications
K. R. Rakesh et al.
APPLIED SURFACE SCIENCE (2019)
Effect of alkali/acid pretreatment on the topography and corrosion resistance of as-deposited CaP coating on magnesium alloys
Song Jiang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Surface microstructure and property modifications in a Mg-8Gd-3Y-0.5Zr magnesium alloy treated by high current pulsed electron beam
T. C. Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
In-vitro assessment of HA-Nb coating on Mg alloy ZK60 for biomedical applications
Balraj Singh et al.
MATERIALS CHEMISTRY AND PHYSICS (2019)
Development of a novel biodegradable and anti-bacterial polyurethane coating for biomedical magnesium rods
Chunhua Wang et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
In Vitro and in Vivo Studies on Two-Step Alkali-Fluoride-Treated Mg-Zn-Y-Nd Alloy for Vascular Stent Application: Enhancement in Corrosion Resistance and Biocompatibility
Pei Wang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
The effects of a phytic acid/calcium ion conversion coating on the corrosion behavior and osteoinductivity of a magnesium-strontium alloy
Li Liu et al.
APPLIED SURFACE SCIENCE (2019)
Effect of surface mechanical attrition treatment on corrosion fatigue behavior of AZ31B magnesium alloy
Gang Chen et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Surface and in vitro properties of Ag-deposited antibacterial and bioactive coatings on AZ31 Mg alloy
Salim Levent Aktug et al.
SURFACE & COATINGS TECHNOLOGY (2019)
The Effect of Laser Shock Peening on the Corrosion Behavior of Biocompatible Magnesium Alloy ZK60
Yu Guo et al.
METALS (2019)
Polyvinyl alcohol/magnesium phosphate composite coated Mg-Ca alloy for biodegradable orthopaedic implant applications
T. T. Dilshad et al.
MATERIALS RESEARCH EXPRESS (2019)
Radio-Telemetric Assessment of Cardiac Variables and Locomotion With Experimentally Induced Hypermagnesemia in Horses Using Chronically Implanted Catheters
Stephen A. Schumacher et al.
FRONTIERS IN VETERINARY SCIENCE (2019)
Improved corrosion resistance and biocompatibility of biodegradable magnesium alloy by coating graphite carbon nitride (g-C3N4)
Guoqiang Yang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Improved corrosion resistance of Mg alloy AZ31B induced by selective evaporation of Mg using large pulsed electron beam irradiation
Woo Jin Lee et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
MgF2/MgO composite coating on porous magnesium surface and its biocorrosion resistance
Hukui Chen et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2019)
Bone marrow derived mesenchymal stem cell response to the RF magnetron sputter deposited hydroxyapatite coating on AZ91 magnesium alloy
Maria A. Surmeneva et al.
MATERIALS CHEMISTRY AND PHYSICS (2019)
Optimization of biocompatibility in a laser surface treated Mg-AZ31B alloy
Jonathan Z. Lu et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Effects of nanofeatures induced by severe shot peening (SSP) on mechanical, corrosion and cytocompatibility properties of magnesium alloy AZ31
Sara Bagherifard et al.
ACTA BIOMATERIALIA (2018)
Corrosion resistance and adhesion strength of a spin-assisted layer-by-layer assembled coating on AZ31 magnesium alloy
Yan-Bin Zhao et al.
APPLIED SURFACE SCIENCE (2018)
Electrospun PCL/HA coated friction stir processed AZ31/HA composites for degradable implant applications
T. Hanas et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
A novel approach to fabricate Zn coating on Mg foam through a modified thermal evaporation technique
Xinfu Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Improving the Degradation Resistance and Surface Biomineralization Ability of Calcium Phosphate Coatings on a Biodegradable Magnesium Alloy via a Sol-Gel Spin Coating Method
Yingchao Su et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Surface design of Mg-Zn alloy temporary orthopaedic implants: Tailoring wettability and biodegradability using laser surface melting
Bhaskar Manne et al.
SURFACE & COATINGS TECHNOLOGY (2018)
The effects of laser shock peening on the mechanical properties and biomedical behavior of AZ31B magnesium alloy
Ruixia Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Antibacterial activities and corrosion behavior of novel PEO/nanostructured ZrO2 coating on Mg alloy
Mohammadreza Daroonparvar et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2018)
Fabrication and Characterization of Mg(OH)2 Films on AZ31 Magnesium Alloy by Alkali Treatment
Hui Tang et al.
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2017)
Microstructure and corrosion behavior of laser surface-treated AZ31B Mg bio-implant material
Tso-Chang Wu et al.
LASERS IN MEDICAL SCIENCE (2017)
Innovative micro-textured hydroxyapatite and poly(L-lactic)-acid polymer composite film as a flexible, corrosion resistant, biocompatible, and bioactive coating for Mg implants
Sae-Mi Kim et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Effect of laser shock peening on the stress corrosion cracking of AZ31B magnesium alloy in a simulated body fluid
Mao-Zhong Ge et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Current status on clinical applications of magnesium-based orthopaedic implants: A review from clinical translational perspective
Dewei Zhao et al.
BIOMATERIALS (2017)
Anodization of magnesium for biomedical applications - Processing, characterization, degradation and cytocompatibility
Aaron F. Cipriano et al.
ACTA BIOMATERIALIA (2017)
Atomic layer deposited ZrO2 nanofilm on Mg-Sr alloy for enhanced corrosion resistance and biocompatibility
Qiuyue Yang et al.
ACTA BIOMATERIALIA (2017)
In Vitro Corrosion and Cytocompatibility of a Microarc Oxidation Coating and Poly(L-lactic acid) Composite Coating on Mg-1Li-1Ca Alloy for Orthopedic Implants
Rong-Chang Zeng et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Mechanisms of the Antimicrobial Activities of Graphene Materials
Xuefeng Zou et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
Tailoring degradation of AZ31 alloy by surface pre-treatment and electrospun PCL fibrous coating
T. Hanas et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Properties of Zr2ON2 film deposited on Mg-Gd-Zn alloy with Mg-Al hydrotalcite film by arc ion plating
Zhixin Ba et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Ultrathin film coating of hydroxyapatite (HA) on a magnesium-calcium alloy using RF magnetron sputtering for bioimplant applications
Maria A. Surmeneva et al.
MATERIALS LETTERS (2015)
Structural, Optical, Antibacterial and Antifungal Properties of Zirconia Nanoparticles by Biobased Protocol
S. Gowri et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2014)
Effect of surface mechanical attrition treatment on biodegradable Mg-1Ca alloy
N. Li et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Influence of shot peening on corrosion properties of biocompatible magnesium alloy AZ31 coated by dicalcium phosphate dihydrate (DCPD)
Mansour Mhaede et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
In vitro degradation behavior and biocompatibility of Mg-Nd-Zn-Zr alloy by hydrofluoric acid treatment
Lin Mao et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
Controlling the degradation rate of AZ91 magnesium alloy via sol-gel derived nanostructured hydroxyapatite coating
Ramin Rojaee et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
Biocorrosion behavior and cell viability of adhesive polymer coated magnesium based alloys for medical implants
Abdalla Abdal-hay et al.
APPLIED SURFACE SCIENCE (2012)
Surface modification of magnesium alloys developed for bioabsorbable orthopedic implants: A general review
Jiali Wang et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2012)
Effect of surface nanocrystallization on the microstructural and corrosion characteristics of AZ91D magnesium alloy
M. Laleh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
In vitro degradation and mechanical integrity of Mg-Zn-Ca alloy coated with Ca-deficient hydroxyapatite by the pulse electrodeposition process
H. X. Wang et al.
ACTA BIOMATERIALIA (2010)
Electrodeposition of Ca-P coatings on biodegradable Mg alloy: In vitro biomineralization behavior
Yang Song et al.
ACTA BIOMATERIALIA (2010)
Effects of organic acid pickling on the corrosion resistance of magnesium alloy AZ31 sheet
U. C. Nwaogu et al.
CORROSION SCIENCE (2010)
A study on alkaline heat treated Mg-Ca alloy for the control of the biocorrosion rate
X. N. Gu et al.
ACTA BIOMATERIALIA (2009)
Effect of laser surface melting on corrosion behaviour of AZ91D Mg alloy in simulated-modified body fluid
Y. C. Guan et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2009)
Effect of high current pulsed electron beam treatment on surface microstructure and wear and corrosion resistance of an AZ91HP magnesium alloy
Bo Gao et al.
SURFACE & COATINGS TECHNOLOGY (2007)
Microstructure characteristic of ceramic coatings fabricated on magnesium alloys by micro-arc oxidation in alkaline silicate solutions
H. F. Guo et al.
APPLIED SURFACE SCIENCE (2006)